Guybrush: Move batteries to board level

Move battery information into the board level in anticipation of them
probably varying with each board.

BRANCH=None
BUG=b:186577625
TEST=make -j buildall, load on guybrush with trembyle battery and ensure
it's identified

Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I1780949746cd30c3033b2c9f36d1ba8f5d331166
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2861055
Reviewed-by: Rob Barnes <robbarnes@google.com>
Commit-Queue: Rob Barnes <robbarnes@google.com>

1 files changed, 0 insertions, 55 deletions

diff --git a/baseboard/guybrush/baseboard.c b/baseboard/guybrush/baseboard.c
index fa48959478..353018142a 100644
--- a/baseboard/guybrush/baseboard.c
+++ b/baseboard/guybrush/baseboard.c
@@ -257,61 +257,6 @@ struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = {
 };
 BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
 
-
-/*
- * Battery info for all Guybrush battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* AP18F4M / LIS4163ACPC */
-	[BATTERY_AP18F4M] = {
-		.fuel_gauge = {
-			.manuf_name = "Murata KT00404001",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x2000,
-				.disconnect_val = 0x2000,
-			}
-		},
-		.batt_info = {
-			.voltage_max          = 8700,
-			.voltage_normal       = 7600,
-			.voltage_min          = 5500,
-			.precharge_current    = 256,
-			.start_charging_min_c = 0,
-			.start_charging_max_c = 50,
-			.charging_min_c       = 0,
-			.charging_max_c       = 60,
-			.discharging_min_c    = -20,
-			.discharging_max_c    = 75,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_AP18F4M;
-
 const struct charger_config_t chg_chips[] = {
 	{
 		.i2c_port = I2C_PORT_CHARGER,