malefor: move sensors support from baseboard to board

Considering every OEM would have different requirements for the use of
sensors and sensors have kinds of models. So move sensors support from
baseboard (volteer) to board (halvor, malefor and volteer), there will
be happy to add/change sensors in boards.

BUG=b:150653745
BRANCH=none
TEST=make buildall

Signed-off-by: xiong.huang <xiong.huang@bitland.corp-partner.google.com>
Change-Id: Ib8d38c823b26a0b1b3838c6d72daf61a10bae680
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2120115
Reviewed-by: Keith Short <keithshort@chromium.org>
Commit-Queue: Keith Short <keithshort@chromium.org>

3 files changed, 0 insertions, 207 deletions

diff --git a/baseboard/volteer/baseboard.h b/baseboard/volteer/baseboard.h
index 69aabc845b..e37ab14d1b 100644
--- a/baseboard/volteer/baseboard.h
+++ b/baseboard/volteer/baseboard.h
@@ -84,25 +84,11 @@
 #define CONFIG_CMD_ACCELS
 #define CONFIG_CMD_ACCEL_INFO
 
-/* BMA253 accelerometer in base */
-#define CONFIG_ACCEL_BMA255
-
 /* Camera VSYNC */
 #define CONFIG_SYNC
 #define CONFIG_SYNC_INT_EVENT \
 	TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
 
-/* TCS3400 ALS */
-#define CONFIG_ALS
-#define ALS_COUNT		1
-#define CONFIG_ALS_TCS3400
-#define CONFIG_ALS_TCS3400_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
-
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	(BIT(LID_ACCEL) | BIT(CLEAR_ALS))
-
 /* Thermal features */
 #define CONFIG_FANS			FAN_CH_COUNT
 #define CONFIG_TEMP_SENSOR
@@ -312,14 +298,6 @@ enum usbc_port {
 	USBC_PORT_COUNT
 };
 
-enum sensor_id {
-	LID_ACCEL = 0,
-	CLEAR_ALS,
-	RGB_ALS,
-	VSYNC,
-	SENSOR_COUNT,
-};
-
 /*
  * Daughterboard type is encoded in the lower 4 bits
  * of the FW_CONFIG CBI tag.
diff --git a/baseboard/volteer/build.mk b/baseboard/volteer/build.mk
index 50b0e5eaeb..ee12262052 100644
--- a/baseboard/volteer/build.mk
+++ b/baseboard/volteer/build.mk
@@ -9,5 +9,4 @@
 baseboard-y=baseboard.o
 baseboard-y+=led.o
 baseboard-y+=battery_presence.o
-baseboard-y+=sensors.o
 baseboard-y+=usb_pd_policy.o
diff --git a/baseboard/volteer/sensors.c b/baseboard/volteer/sensors.c
deleted file mode 100644
index e063f7dbc1..0000000000
--- a/baseboard/volteer/sensors.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer family-specific sensor configuration */
-#include "common.h"
-#include "accelgyro.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/als_tcs3400.h"
-#include "driver/sync.h"
-#include "keyboard_scan.h"
-#include "hooks.h"
-#include "task.h"
-#include "util.h"
-
-/******************************************************************************/
-/* Sensors */
-static struct mutex g_lid_accel_mutex;
-
-/* BMA253 private data */
-static struct accelgyro_saved_data_t g_bma253_data;
-
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-/*
- * TODO: b/146166425 need to calibrate ALS/RGB sensor. At default settings,
- * shining phone flashlight on sensor pegs all readings at 0xFFFF.
- */
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
-/* Rotation matrix for the lid accelerometer */
-/* TODO: b/146144170 - the accelerometer is on the motherboard for proto1
- * for testing. Once the sensor moves to the lid, the rotation matrix needs
- * to be updated for correct behavior.
- */
-static const mat33_fp_t lid_standard_ref = {
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_accel_mutex,
-		.drv_data = &g_bma253_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.default_range = 2, /* g, to support tablet mode */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
-
-	[VSYNC] = {
-		.name = "Camera VSYNC",
-		.active_mask = SENSOR_ACTIVE_S0,
-		.chip = MOTIONSENSE_CHIP_GPIO,
-		.type = MOTIONSENSE_TYPE_SYNC,
-		.location = MOTIONSENSE_LOC_CAMERA,
-		.drv = &sync_drv,
-		.default_range = 0,
-		.min_frequency = 0,
-		.max_frequency = 1,
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
-static void baseboard_sensors_init(void)
-{
-	/* Note - BMA253 interrupt unused by EC */
-
-	/* Enable gpio interrupt for camera vsync */
-	gpio_enable_interrupt(GPIO_EC_CAM_VSYN_SLP_S0IX);
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_L);
-}
-DECLARE_HOOK(HOOK_INIT, baseboard_sensors_init, HOOK_PRIO_DEFAULT);