baseboard/dedede/baseboard.h: Format with clang-format

BUG=b:236386294
BRANCH=none
TEST=none

Change-Id: Ie4218f2b0bb2d66183f2a78c442ac289a6cd624a
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3727871
Reviewed-by: Jeremy Bettis <jbettis@chromium.org>

1 files changed, 66 insertions, 73 deletions

diff --git a/baseboard/dedede/baseboard.h b/baseboard/dedede/baseboard.h
index 0085c48ec3..dff4cd5e7f 100644
--- a/baseboard/dedede/baseboard.h
+++ b/baseboard/dedede/baseboard.h
@@ -12,7 +12,7 @@
  * By default, enable all console messages excepted HC, ACPI and event:
  * The sensor stack is generating a lot of activity.
  */
-#define CC_DEFAULT     (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC)))
+#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC)))
 #undef CONFIG_HOSTCMD_DEBUG_MODE
 #define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF
 
@@ -20,39 +20,37 @@
  * Variant EC defines. Pick one:
  * VARIANT_DEDEDE_EC_NPCX796FC
  */
-#if defined(VARIANT_DEDEDE_EC_NPCX796FC) || \
-	defined(VARIANT_KEEBY_EC_NPCX797FC)
-	/* NPCX7 config */
-	#define NPCX_UART_MODULE2 1  /* GPIO64/65 are used as UART pins. */
-	#define NPCX_TACH_SEL2    0  /* No tach. */
-
-	/* Internal SPI flash on NPCX7 */
-	#define CONFIG_FLASH_SIZE_BYTES (512 * 1024)
-	#define CONFIG_SPI_FLASH_REGS
-	#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */
-#elif defined(VARIANT_DEDEDE_EC_IT8320) || \
-	defined(VARIANT_KEEBY_EC_IT8320)
-	/* IT83XX config */
-	#define CONFIG_IT83XX_VCC_1P8V
-	/* I2C Bus Configuration */
-	#define I2C_PORT_EEPROM		IT83XX_I2C_CH_A
-	#define I2C_PORT_BATTERY	IT83XX_I2C_CH_B
-	#define I2C_PORT_SENSOR		IT83XX_I2C_CH_C
-	#define I2C_PORT_SUB_USB_C1	IT83XX_I2C_CH_E
-	#define I2C_PORT_USB_C0		IT83XX_I2C_CH_F
-
-	#define I2C_ADDR_EEPROM_FLAGS	0x50
-
-	#define CONFIG_ADC_VOLTAGE_COMPARATOR	/* ITE ADC thresholds */
-
-	#undef CONFIG_UART_TX_BUF_SIZE		/* UART */
-	#define CONFIG_UART_TX_BUF_SIZE 4096
-
-	/*
-	 * Limit maximal ODR to 125Hz, the EC is using ~5ms per sample at
-	 * 48MHz core cpu clock.
-	 */
-	#define CONFIG_EC_MAX_SENSOR_FREQ_MILLIHZ 125000
+#if defined(VARIANT_DEDEDE_EC_NPCX796FC) || defined(VARIANT_KEEBY_EC_NPCX797FC)
+/* NPCX7 config */
+#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */
+#define NPCX_TACH_SEL2 0 /* No tach. */
+
+/* Internal SPI flash on NPCX7 */
+#define CONFIG_FLASH_SIZE_BYTES (512 * 1024)
+#define CONFIG_SPI_FLASH_REGS
+#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */
+#elif defined(VARIANT_DEDEDE_EC_IT8320) || defined(VARIANT_KEEBY_EC_IT8320)
+/* IT83XX config */
+#define CONFIG_IT83XX_VCC_1P8V
+/* I2C Bus Configuration */
+#define I2C_PORT_EEPROM IT83XX_I2C_CH_A
+#define I2C_PORT_BATTERY IT83XX_I2C_CH_B
+#define I2C_PORT_SENSOR IT83XX_I2C_CH_C
+#define I2C_PORT_SUB_USB_C1 IT83XX_I2C_CH_E
+#define I2C_PORT_USB_C0 IT83XX_I2C_CH_F
+
+#define I2C_ADDR_EEPROM_FLAGS 0x50
+
+#define CONFIG_ADC_VOLTAGE_COMPARATOR /* ITE ADC thresholds */
+
+#undef CONFIG_UART_TX_BUF_SIZE /* UART */
+#define CONFIG_UART_TX_BUF_SIZE 4096
+
+/*
+ * Limit maximal ODR to 125Hz, the EC is using ~5ms per sample at
+ * 48MHz core cpu clock.
+ */
+#define CONFIG_EC_MAX_SENSOR_FREQ_MILLIHZ 125000
 #else
 #error "Must define a VARIANT_[DEDEDE|KEEBY]_EC!"
 #endif
@@ -71,36 +69,36 @@
  * Remapping of schematic GPIO names to common GPIO names expected (hardcoded)
  * in the EC code base.
  */
-#define GPIO_CPU_PROCHOT	GPIO_EC_PROCHOT_ODL
-#define GPIO_EC_INT_L		GPIO_EC_AP_MKBP_INT_L
-#define GPIO_EN_PP5000		GPIO_EN_PP5000_U
-#define GPIO_ENTERING_RW	GPIO_EC_ENTERING_RW
-#define GPIO_KBD_KSO2		GPIO_EC_KSO_02_INV
+#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL
+#define GPIO_EC_INT_L GPIO_EC_AP_MKBP_INT_L
+#define GPIO_EN_PP5000 GPIO_EN_PP5000_U
+#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW
+#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV
 #if !KEEBY_VARIANT
-#define GPIO_PACKET_MODE_EN	GPIO_ECH1_PACKET_MODE
+#define GPIO_PACKET_MODE_EN GPIO_ECH1_PACKET_MODE
 #endif
-#define GPIO_PCH_DSW_PWROK	GPIO_EC_AP_DPWROK
-#define GPIO_PCH_PWRBTN_L	GPIO_EC_AP_PWR_BTN_ODL
-#define GPIO_PCH_RSMRST_L	GPIO_EC_AP_RSMRST_L
-#define GPIO_PCH_RTCRST		GPIO_EC_AP_RTCRST
-#define GPIO_PCH_SLP_S0_L	GPIO_SLP_S0_L
-#define GPIO_PCH_SLP_S3_L	GPIO_SLP_S3_L
-#define GPIO_PCH_SLP_S4_L	GPIO_SLP_S4_L
-#define GPIO_PCH_WAKE_L		GPIO_EC_AP_WAKE_ODL
-#define GPIO_PG_EC_RSMRST_ODL	GPIO_RSMRST_PWRGD_L
+#define GPIO_PCH_DSW_PWROK GPIO_EC_AP_DPWROK
+#define GPIO_PCH_PWRBTN_L GPIO_EC_AP_PWR_BTN_ODL
+#define GPIO_PCH_RSMRST_L GPIO_EC_AP_RSMRST_L
+#define GPIO_PCH_RTCRST GPIO_EC_AP_RTCRST
+#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L
+#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L
+#define GPIO_PCH_SLP_S4_L GPIO_SLP_S4_L
+#define GPIO_PCH_WAKE_L GPIO_EC_AP_WAKE_ODL
+#define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_PWRGD_L
 #if KEEBY_VARIANT
-#define GPIO_POWER_BUTTON_L	GPIO_EC_PWR_BTN_ODL
+#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL
 #else
-#define GPIO_POWER_BUTTON_L	GPIO_H1_EC_PWR_BTN_ODL
+#define GPIO_POWER_BUTTON_L GPIO_H1_EC_PWR_BTN_ODL
 #endif
-#define GPIO_PG_EC_RSMRST_ODL	GPIO_RSMRST_PWRGD_L
-#define GPIO_SYS_RESET_L	GPIO_SYS_RST_ODL
-#define GPIO_USB_C0_DP_HPD	GPIO_EC_AP_USB_C0_HPD
-#define GPIO_USB_C1_DP_HPD	GPIO_EC_AP_USB_C1_HDMI_HPD
-#define GPIO_VOLUME_UP_L	GPIO_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L	GPIO_VOLDN_BTN_ODL
-#define GPIO_WP			GPIO_EC_WP_OD
-#define GPIO_TABLET_MODE_L	GPIO_LID_360_L
+#define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_PWRGD_L
+#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL
+#define GPIO_USB_C0_DP_HPD GPIO_EC_AP_USB_C0_HPD
+#define GPIO_USB_C1_DP_HPD GPIO_EC_AP_USB_C1_HDMI_HPD
+#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL
+#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL
+#define GPIO_WP GPIO_EC_WP_OD
+#define GPIO_TABLET_MODE_L GPIO_LID_360_L
 
 /* Common EC defines */
 
@@ -175,7 +173,7 @@
 
 /* Backlight */
 #define CONFIG_BACKLIGHT_LID
-#define GPIO_ENABLE_BACKLIGHT   GPIO_EN_BL_OD
+#define GPIO_ENABLE_BACKLIGHT GPIO_EN_BL_OD
 
 /* LED */
 #define CONFIG_LED_COMMON
@@ -206,7 +204,7 @@
 
 /* Temp Sensor */
 #define CONFIG_TEMP_SENSOR_POWER
-#define GPIO_TEMP_SENSOR_POWER  GPIO_EN_PP3300_A
+#define GPIO_TEMP_SENSOR_POWER GPIO_EN_PP3300_A
 #define CONFIG_TEMP_SENSOR_FIRST_READ_DELAY_MS 500
 
 /* USB PD */
@@ -238,14 +236,14 @@
 #endif
 
 /* Define typical operating power and max power. */
-#define PD_MAX_VOLTAGE_MV     20000
-#define PD_MAX_CURRENT_MA     3000
-#define PD_MAX_POWER_MW       45000
+#define PD_MAX_VOLTAGE_MV 20000
+#define PD_MAX_CURRENT_MA 3000
+#define PD_MAX_POWER_MW 45000
 #define PD_OPERATING_POWER_MW 15000
 
 /* TODO(b:147314141): Verify these timings */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000	/* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY	250000	/* us */
+#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */
+#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */
 
 #ifndef __ASSEMBLER__
 
@@ -255,13 +253,8 @@
 
 /* Common enums */
 #if defined(VARIANT_DEDEDE_EC_NPCX796FC)
-#elif defined(VARIANT_DEDEDE_EC_IT8320) || \
-	defined(VARIANT_KEEBY_EC_IT8320)
-	enum board_vcmp {
-		VCMP_SNS_PP3300_LOW,
-		VCMP_SNS_PP3300_HIGH,
-		VCMP_COUNT
-	};
+#elif defined(VARIANT_DEDEDE_EC_IT8320) || defined(VARIANT_KEEBY_EC_IT8320)
+enum board_vcmp { VCMP_SNS_PP3300_LOW, VCMP_SNS_PP3300_HIGH, VCMP_COUNT };
 #endif
 
 /* Interrupt handler for signals that are used to generate ALL_SYS_PGOOD. */