drop unnecessary boards, chips and cts tests

The only board which would be built from this branch is Cr50. bds,
fizz and host boards are necessary for proper make infrastructure
operation and tests.

lm4 and npcx are chips used by the bds and fizz boards, so they are
also kept around.

BRANCH=cr50, cr50-mp
BUG=b:145912698
TEST='make buildall -j' succeeds

Change-Id: I937b2b8642c1fe91578fc9615438ae22c165b20f
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1986942
Reviewed-by: Namyoon Woo <namyoon@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>

1 files changed, 0 insertions, 203 deletions

diff --git a/board/arcada_ish/board.c b/board/arcada_ish/board.c
deleted file mode 100644
index ea8118642e..0000000000
--- a/board/arcada_ish/board.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Arcada ISH board-specific configuration */
-
-#include "console.h"
-#include "driver/accel_lis2dh.h"
-#include "driver/accelgyro_lsm6dsm.h"
-#include "driver/mag_lis2mdl.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "i2c.h"
-#include "lid_switch.h"
-#include "motion_sense.h"
-#include "power.h"
-#include "tablet_mode.h"
-#include "task.h"
-
-#include "gpio_list.h" /* has to be included last */
-
-/* I2C port map */
-const struct i2c_port_t i2c_ports[] = {
-	{
-		.name = "sensor",
-		.port = I2C_PORT_SENSOR,
-		.kbps = 400,
-	},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* Sensor config */
-static struct mutex g_lid_mutex;
-static struct mutex g_lid_mag_mutex;
-static struct mutex g_base_mutex;
-
-/* sensor private data */
-static struct lsm6dsm_data lsm6dsm_a_data = LSM6DSM_DATA;
-static struct stprivate_data g_lis2dh_data;
-static struct lis2mdl_private_data lis2mdl_a_data;
-
-/* Matrix to rotate lid sensor into standard reference frame */
-const mat33_fp_t lid_rot_ref = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0,  FLOAT_TO_FP(1)}
-};
-
-/* Drivers */
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0,
-		.chip = MOTIONSENSE_CHIP_LSM6DS3,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_a_data,
-				MOTIONSENSE_TYPE_ACCEL),
-		.int_signal = GPIO_ACCEL_GYRO_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_rot_ref,
-		.default_range = 4,  /* g */
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on for lid angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 13000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[LID_GYRO] = {
-		.name = "Lid Gyro",
-		.active_mask = SENSOR_ACTIVE_S0,
-		.chip = MOTIONSENSE_CHIP_LSM6DS3,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lsm6dsm_drv,
-		.mutex = &g_lid_mutex,
-		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_a_data,
-				MOTIONSENSE_TYPE_GYRO),
-		.int_signal = GPIO_ACCEL_GYRO_INT_L,
-		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LSM6DSM_ADDR1_FLAGS,
-		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
-		.rot_standard_ref = &lid_rot_ref,
-		.min_frequency = LSM6DSM_ODR_MIN_VAL,
-		.max_frequency = LSM6DSM_ODR_MAX_VAL,
-	},
-
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0,
-		.chip = MOTIONSENSE_CHIP_LNG2DM,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &lis2dh_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_lis2dh_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LNG2DM_ADDR0_FLAGS,
-		.rot_standard_ref = NULL, /* Identity matrix */
-		/* We only use 2g because its resolution is only 8-bits */
-		.default_range = 2, /* g */
-		.min_frequency = LIS2DH_ODR_MIN_VAL,
-		.max_frequency = LIS2DH_ODR_MAX_VAL,
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on for lid angle detection */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-
-	[LID_MAG] = {
-		.name = "Lid Mag",
-		.active_mask = SENSOR_ACTIVE_S0,
-		.chip = MOTIONSENSE_CHIP_LIS2MDL,
-		.type = MOTIONSENSE_TYPE_MAG,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &lis2mdl_drv,
-		.mutex = &g_lid_mag_mutex,
-		.drv_data = LIS2MDL_ST_DATA(lis2mdl_a_data),
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = LIS2MDL_ADDR_FLAGS,
-		.default_range = 1 << 11,	/* 16LSB / uT, fixed  */
-		.rot_standard_ref = &lid_rot_ref,
-		.min_frequency = LIS2MDL_ODR_MIN_VAL,
-		.max_frequency = LIS2MDL_ODR_MAX_VAL,
-	},
-};
-
-const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-int board_sensor_at_360(void)
-{
-	/*
-	 * The 360 degree sensor is too sensitive and is active when the lid is
-	 * closed at 0 degrees. Ignore the hall sensor when the lid close is
-	 * also active.
-	 */
-	return lid_is_open() &&
-	       !gpio_get_level(GMR_TABLET_MODE_GPIO_L);
-}
-
-/* Initialize board. */
-static void board_init(void)
-{
-	/* Enable interrupt for LSM6DS3 sensor */
-	gpio_enable_interrupt(GPIO_ACCEL_GYRO_INT_L);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-/*
- * The only use for chipset state is sensors, so we hard code the AP state to on
- * and make the sensor on in S0. The sensors are always on when the ISH is
- * powered.
- */
-int chipset_in_state(int state_mask)
-{
-	return state_mask & CHIPSET_STATE_ON;
-}
-
-int chipset_in_or_transitioning_to_state(int state_mask)
-{
-	return chipset_in_state(state_mask);
-}
-
-void chipset_force_shutdown(enum chipset_shutdown_reason reason)
-{
-	/* Required, but nothing to do */
-}
-
-/* Needed for empty chipset task */
-int board_idle_task(void *unused)
-{
-	while (1)
-		task_wait_event(-1);
-}
-
-static void board_tablet_mode_change(void)
-{
-	/* Update GPIO to EC letting it know that we entered tablet mode */
-	gpio_set_level(GPIO_NB_MODE_L, tablet_get_mode());
-}
-DECLARE_HOOK(HOOK_TABLET_MODE_CHANGE, board_tablet_mode_change,
-	     HOOK_PRIO_DEFAULT);