cappy2:initial EC

create Cappy2

BUG=b:191718716
BRANCH=Keeby
TEST=make BOARD=cappy2 pass

Signed-off-by: wangganxiang <wangganxiang@huaqin.corp-partner.google.com>
Change-Id: Id374b76eb020d429c5281ed6e9b7d1d7050c62d0
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3020642
Reviewed-by: Mike Lee <mike5@huaqin.corp-partner.google.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>

1 files changed, 32 insertions, 101 deletions

diff --git a/board/cappy2/board.h b/board/cappy2/board.h
index e243743e76..f7ec261ad7 100644
--- a/board/cappy2/board.h
+++ b/board/cappy2/board.h
@@ -3,7 +3,7 @@
  * found in the LICENSE file.
  */
 
-/* Lalala board configuration */
+/* cappy2 board configuration */
 
 #ifndef __CROS_EC_BOARD_H
 #define __CROS_EC_BOARD_H
@@ -11,6 +11,13 @@
 #define VARIANT_KEEBY_EC_NPCX797FC
 #include "baseboard.h"
 
+#undef	GPIO_VOLUME_UP_L
+#undef	GPIO_VOLUME_DOWN_L
+#undef	CONFIG_VOLUME_BUTTONS
+
+/* System unlocked in early development */
+#define CONFIG_SYSTEM_UNLOCKED
+
 /*
  * The RAM and flash size combination on the the NPCX797FC does not leave
  * any unused flash space that can be used to store the .init_rom section.
@@ -24,52 +31,27 @@
 #define CONFIG_CHARGER_RAA489000
 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
 #define CONFIG_CHARGER_SENSE_RESISTOR 10
-#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */
-#define CONFIG_OCPC
-#undef  CONFIG_CHARGER_SINGLE_CHIP
-#undef CONFIG_CMD_CHARGER_DUMP
-#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
+#define CONFIG_CHARGER_SINGLE_CHIP
+#undef	CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
 #define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC)
 
-/* GPIO for C1 interrupts, for baseboard use */
-#define GPIO_USB_C1_INT_ODL GPIO_SUB_USB_C1_INT_ODL
-
 /* Keyboard */
-#define CONFIG_KEYBOARD_BOARD_CONFIG
-#define CONFIG_KEYBOARD_KEYPAD
-#define CONFIG_PWM_KBLIGHT
+#undef	CONFIG_PWM_KBLIGHT
 
 /* LED defines */
+#define CONFIG_LED_COMMON
 #define CONFIG_LED_ONOFF_STATES
+#define GPIO_BAT_LED_RED_L GPIO_LED_R_ODL
+#define GPIO_BAT_LED_GREEN_L GPIO_LED_G_ODL
+#define GPIO_PWR_LED_BLUE_L GPIO_LED_B_ODL
 
 /* PWM */
-#define CONFIG_PWM
-#define NPCX7_PWM1_SEL    1  /* GPIO C2 is used as PWM1. */
-
-/* Temp sensor */
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THROTTLE_AP
-#define CONFIG_THERMISTOR_NCP15WB
-#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
-#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A
-
-/* USB */
-#define CONFIG_BC12_DETECT_PI3USB9201
-#define CONFIG_USBC_RETIMER_PS8802
-
-/* Common USB-A defines */
-#define USB_PORT_COUNT 2
-#define CONFIG_USB_PORT_POWER_SMART
-#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY
-#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP
-#define CONFIG_USB_PORT_POWER_SMART_INVERTED
-#define GPIO_USB1_ILIM_SEL GPIO_USB_A0_CHARGE_EN_L
-#define GPIO_USB2_ILIM_SEL GPIO_USB_A1_CHARGE_EN_L
+#define NPCX7_PWM1_SEL    0  /* GPIO C2 is used as PWM1. */
 
 /******************************************************************************/
 
 /* USB PD */
-#define CONFIG_USB_PD_PORT_MAX_COUNT 2
+#define CONFIG_USB_PD_PORT_MAX_COUNT 1
 #define CONFIG_USB_PD_TCPM_RAA489000
 
 /* USB defines specific to external TCPCs */
@@ -81,73 +63,37 @@
 /* Variant references the TCPCs to determine Vbus sourcing */
 #define CONFIG_USB_PD_5V_EN_CUSTOM
 
+/* BC1.2 */
+#define CONFIG_BC12_DETECT_PI3USB9201
+
+/* MUX */
+#define CONFIG_USB_MUX_PS8743
+
+/* Thermistors */
+#define CONFIG_TEMP_SENSOR
+#define CONFIG_THERMISTOR
+#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
+#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A
+
 /* I2C configuration */
 #define I2C_PORT_EEPROM     NPCX_I2C_PORT7_0
 #define I2C_PORT_BATTERY    NPCX_I2C_PORT5_0
 #define I2C_PORT_SENSOR     NPCX_I2C_PORT0_0
 #define I2C_PORT_USB_C0     NPCX_I2C_PORT1_0
-#define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0
 #define I2C_PORT_USB_MUX    I2C_PORT_USB_C0
-/* TODO(b:147440290): Need to handle multiple charger ICs */
-#define I2C_PORT_CHARGER    I2C_PORT_USB_C0
-
-#define I2C_PORT_ACCEL      I2C_PORT_SENSOR
 
 #define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */
 
-/* Sensors */
-#define CONFIG_CMD_ACCELS
-#define CONFIG_CMD_ACCEL_INFO
-#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
-
-#define CONFIG_ACCEL_BMA255		/* Lid accel */
-#define CONFIG_ACCELGYRO_BMI160		/* Base accel */
-#define CONFIG_ACCEL_KX022		/* Lid accel */
-#define CONFIG_ACCELGYRO_ICM426XX	/* Base accel second source*/
-
-/* Lid operates in forced mode, base in FIFO */
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-#define CONFIG_ACCEL_FIFO
-#define CONFIG_ACCEL_FIFO_SIZE 256	/* Must be a power of 2 */
-#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
-
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-#define CONFIG_TABLET_MODE
-#define CONFIG_TABLET_MODE_SWITCH
-#define CONFIG_GMR_TABLET_MODE
-
-/* Volume Button feature */
-#define CONFIG_ADC_BUTTONS
-#define CONFIG_VOLUME_BUTTONS
-#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL
-
 #ifndef __ASSEMBLER__
 
 #include "gpio_signal.h"
 #include "registers.h"
 
-enum chg_id {
-	CHARGER_PRIMARY,
-	CHARGER_SECONDARY,
-	CHARGER_NUM,
-};
-
 enum adc_channel {
 	ADC_TEMP_SENSOR_1,     /* ADC0 */
 	ADC_TEMP_SENSOR_2,     /* ADC1 */
 	ADC_SUB_ANALOG,	       /* ADC2 */
+	ADC_TEMP_SENSOR_3,     /* ADC6 */
 	ADC_VSNS_PP3300_A,     /* ADC9 */
 	ADC_CH_COUNT
 };
@@ -155,29 +101,14 @@ enum adc_channel {
 enum temp_sensor_id {
 	TEMP_SENSOR_1,
 	TEMP_SENSOR_2,
+	TEMP_SENSOR_3,
 	TEMP_SENSOR_COUNT
 };
 
-enum sensor_id {
-	LID_ACCEL,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT
-};
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT,
-	PWM_CH_COUNT,
-};
-
 enum battery_type {
-	BATTERY_AP19B8M,
-	BATTERY_LGC_AP18C8K,
-	BATTERY_MURATA_AP18C4K,
+	BATTERY_SDI,
 	BATTERY_TYPE_COUNT,
 };
 
-int board_is_sourcing_vbus(int port);
-void motion_interrupt(enum gpio_signal signal);
 #endif /* !__ASSEMBLER__ */
 #endif /* __CROS_EC_BOARD_H */