strongbad / coachz : Add Initial Support

BUG=b:162409909
BUG=b:164196066

TEST=Verify build of strongbad target
BRANCH=none

Signed-off-by: Bob Moragues <moragues@chromium.org>
Change-Id: I763d3be6852dfdbcf52a3db5b3bfa82fd654d459
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2396537

1 files changed, 696 insertions, 0 deletions

diff --git a/board/coachz/board.c b/board/coachz/board.c
new file mode 100644
index 0000000000..3b96d02baa
--- /dev/null
+++ b/board/coachz/board.c
@@ -0,0 +1,696 @@
+/* Copyright 2020 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Coachz board-specific configuration */
+
+#include "adc_chip.h"
+#include "button.h"
+#include "charge_manager.h"
+#include "charge_state.h"
+#include "extpower.h"
+#include "driver/accel_bma2x2.h"
+#include "driver/accelgyro_bmi_common.h"
+#include "driver/ppc/sn5s330.h"
+#include "driver/tcpm/ps8xxx.h"
+#include "driver/tcpm/tcpci.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "keyboard_scan.h"
+#include "lid_switch.h"
+#include "ln9310.h"
+#include "pi3usb9201.h"
+#include "power.h"
+#include "power_button.h"
+#include "pwm.h"
+#include "pwm_chip.h"
+#include "system.h"
+#include "shi_chip.h"
+#include "switch.h"
+#include "tablet_mode.h"
+#include "task.h"
+#include "usbc_ppc.h"
+
+#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
+#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+
+/* Forward declaration */
+static void tcpc_alert_event(enum gpio_signal signal);
+static void usb0_evt(enum gpio_signal signal);
+static void usb1_evt(enum gpio_signal signal);
+static void ppc_interrupt(enum gpio_signal signal);
+static void board_connect_c0_sbu(enum gpio_signal s);
+static void switchcap_interrupt(enum gpio_signal signal);
+
+#include "gpio_list.h"
+
+static uint8_t sku_id;
+
+/* GPIO Interrupt Handlers */
+static void tcpc_alert_event(enum gpio_signal signal)
+{
+	int port = -1;
+
+	switch (signal) {
+	case GPIO_USB_C0_PD_INT_ODL:
+		port = 0;
+		break;
+	case GPIO_USB_C1_PD_INT_ODL:
+		port = 1;
+		break;
+	default:
+		return;
+	}
+
+	schedule_deferred_pd_interrupt(port);
+}
+
+static void usb0_evt(enum gpio_signal signal)
+{
+	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12, 0);
+}
+
+static void usb1_evt(enum gpio_signal signal)
+{
+	task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12, 0);
+}
+
+static void ppc_interrupt(enum gpio_signal signal)
+{
+	switch (signal) {
+	case GPIO_USB_C0_SWCTL_INT_ODL:
+		sn5s330_interrupt(0);
+		break;
+	case GPIO_USB_C1_SWCTL_INT_ODL:
+		sn5s330_interrupt(1);
+		break;
+	default:
+		break;
+	}
+}
+
+static void board_connect_c0_sbu_deferred(void)
+{
+	/*
+	 * If CCD_MODE_ODL asserts, it means there's a debug accessory connected
+	 * and we should enable the SBU FETs.
+	 */
+	ppc_set_sbu(0, 1);
+}
+DECLARE_DEFERRED(board_connect_c0_sbu_deferred);
+
+static void board_connect_c0_sbu(enum gpio_signal s)
+{
+	hook_call_deferred(&board_connect_c0_sbu_deferred_data, 0);
+}
+
+static void switchcap_interrupt(enum gpio_signal signal)
+{
+	ln9310_interrupt(signal);
+}
+
+/* ADC channels */
+const struct adc_t adc_channels[] = {
+	/* Measure VBUS through a 1/10 voltage divider */
+	[ADC_VBUS] = {
+		"VBUS",
+		NPCX_ADC_CH1,
+		ADC_MAX_VOLT * 10,
+		ADC_READ_MAX + 1,
+		0
+	},
+	/*
+	 * Adapter current output or battery charging/discharging current (uV)
+	 * 18x amplification on charger side.
+	 */
+	[ADC_AMON_BMON] = {
+		"AMON_BMON",
+		NPCX_ADC_CH2,
+		ADC_MAX_VOLT * 1000 / 18,
+		ADC_READ_MAX + 1,
+		0
+	},
+	/*
+	 * ISL9238 PSYS output is 1.44 uA/W over 5.6K resistor, to read
+	 * 0.8V @ 99 W, i.e. 124000 uW/mV. Using ADC_MAX_VOLT*124000 and
+	 * ADC_READ_MAX+1 as multiplier/divider leads to overflows, so we
+	 * only divide by 2 (enough to avoid precision issues).
+	 */
+	[ADC_PSYS] = {
+		"PSYS",
+		NPCX_ADC_CH3,
+		ADC_MAX_VOLT * 124000 * 2 / (ADC_READ_MAX + 1),
+		2,
+		0
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
+
+const struct pwm_t pwm_channels[] = {
+	[PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 },
+	/* TODO(waihong): Assign a proper frequency. */
+	[PWM_CH_DISPLIGHT] = { .channel = 5, .flags = 0, .freq = 4800 },
+};
+BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
+
+/* LN9310 switchcap */
+const struct ln9310_config_t ln9310_config = {
+	.i2c_port = I2C_PORT_POWER,
+	.i2c_addr_flags = LN9310_I2C_ADDR_0_FLAGS,
+};
+
+/* Power Path Controller */
+struct ppc_config_t ppc_chips[] = {
+	{
+		.i2c_port = I2C_PORT_TCPC0,
+		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
+		.drv = &sn5s330_drv
+	},
+	{
+		.i2c_port = I2C_PORT_TCPC1,
+		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
+		.drv = &sn5s330_drv
+	},
+};
+unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
+
+/* TCPC mux configuration */
+const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
+	{
+		.bus_type = EC_BUS_TYPE_I2C,
+		.i2c_info = {
+			.port = I2C_PORT_TCPC0,
+			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
+		},
+		.drv = &ps8xxx_tcpm_drv,
+	},
+	{
+		.bus_type = EC_BUS_TYPE_I2C,
+		.i2c_info = {
+			.port = I2C_PORT_TCPC1,
+			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
+		},
+		.drv = &ps8xxx_tcpm_drv,
+	},
+};
+
+/*
+ * Port-0/1 USB mux driver.
+ *
+ * The USB mux is handled by TCPC chip and the HPD update is through a GPIO
+ * to AP. But the TCPC chip is also needed to know the HPD status; otherwise,
+ * the mux misbehaves.
+ */
+const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
+	{
+		.usb_port = 0,
+		.driver = &tcpci_tcpm_usb_mux_driver,
+		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
+	},
+	{
+		.usb_port = 1,
+		.driver = &tcpci_tcpm_usb_mux_driver,
+		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
+	}
+};
+
+const int usb_port_enable[USB_PORT_COUNT] = {
+	GPIO_EN_USB_A_5V,
+};
+
+/* BC1.2 */
+const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
+	{
+		.i2c_port = I2C_PORT_POWER,
+		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
+	},
+	{
+		.i2c_port = I2C_PORT_EEPROM,
+		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
+	},
+};
+
+/* Mutexes */
+static struct mutex g_base_mutex;
+static struct mutex g_lid_mutex;
+
+static struct bmi_drv_data_t g_bmi160_data;
+static struct accelgyro_saved_data_t g_bma255_data;
+
+/* Matrix to rotate accelerometer into standard reference frame */
+const mat33_fp_t base_standard_ref = {
+	{ FLOAT_TO_FP(1), 0,  0},
+	{ 0,  FLOAT_TO_FP(-1),  0},
+	{ 0,  0, FLOAT_TO_FP(-1)}
+};
+
+static const mat33_fp_t lid_standard_ref = {
+	{ FLOAT_TO_FP(-1), 0, 0},
+	{ 0, FLOAT_TO_FP(-1), 0},
+	{ 0, 0, FLOAT_TO_FP(1)}
+};
+
+struct motion_sensor_t motion_sensors[] = {
+	[LID_ACCEL] = {
+	 .name = "Lid Accel",
+	 .active_mask = SENSOR_ACTIVE_S0_S3,
+	 .chip = MOTIONSENSE_CHIP_BMA255,
+	 .type = MOTIONSENSE_TYPE_ACCEL,
+	 .location = MOTIONSENSE_LOC_LID,
+	 .drv = &bma2x2_accel_drv,
+	 .mutex = &g_lid_mutex,
+	 .drv_data = &g_bma255_data,
+	 .port = I2C_PORT_SENSOR,
+	 .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
+	 .rot_standard_ref = &lid_standard_ref,
+	 .default_range = 2, /* g, to support lid angle calculation. */
+	 .min_frequency = BMA255_ACCEL_MIN_FREQ,
+	 .max_frequency = BMA255_ACCEL_MAX_FREQ,
+	 .config = {
+		/* EC use accel for angle detection */
+		[SENSOR_CONFIG_EC_S0] = {
+			.odr = 10000 | ROUND_UP_FLAG,
+		},
+		/* Sensor on for lid angle detection */
+		[SENSOR_CONFIG_EC_S3] = {
+			.odr = 10000 | ROUND_UP_FLAG,
+		},
+	 },
+	},
+	/*
+	 * Note: bmi160: supports accelerometer and gyro sensor
+	 * Requirement: accelerometer sensor must init before gyro sensor
+	 * DO NOT change the order of the following table.
+	 */
+	[BASE_ACCEL] = {
+	 .name = "Base Accel",
+	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
+	 .chip = MOTIONSENSE_CHIP_BMI160,
+	 .type = MOTIONSENSE_TYPE_ACCEL,
+	 .location = MOTIONSENSE_LOC_BASE,
+	 .drv = &bmi160_drv,
+	 .mutex = &g_base_mutex,
+	 .drv_data = &g_bmi160_data,
+	 .port = I2C_PORT_SENSOR,
+	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
+	 .rot_standard_ref = &base_standard_ref,
+	 .default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
+	 .min_frequency = BMI_ACCEL_MIN_FREQ,
+	 .max_frequency = BMI_ACCEL_MAX_FREQ,
+	 .config = {
+		 [SENSOR_CONFIG_EC_S0] = {
+			 .odr = 10000 | ROUND_UP_FLAG,
+		 },
+	 },
+	},
+	[BASE_GYRO] = {
+	 .name = "Gyro",
+	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
+	 .chip = MOTIONSENSE_CHIP_BMI160,
+	 .type = MOTIONSENSE_TYPE_GYRO,
+	 .location = MOTIONSENSE_LOC_BASE,
+	 .drv = &bmi160_drv,
+	 .mutex = &g_base_mutex,
+	 .drv_data = &g_bmi160_data,
+	 .port = I2C_PORT_SENSOR,
+	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
+	 .default_range = 1000, /* dps */
+	 .rot_standard_ref = &base_standard_ref,
+	 .min_frequency = BMI_GYRO_MIN_FREQ,
+	 .max_frequency = BMI_GYRO_MAX_FREQ,
+	},
+};
+unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
+
+#ifndef TEST_BUILD
+/* This callback disables keyboard when convertibles are fully open */
+void lid_angle_peripheral_enable(int enable)
+{
+	int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON);
+
+	if (enable) {
+		keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE);
+	} else {
+		/*
+		 * Ensure that the chipset is off before disabling the keyboard.
+		 * When the chipset is on, the EC keeps the keyboard enabled and
+		 * the AP decides whether to ignore input devices or not.
+		 */
+		if (!chipset_in_s0)
+			keyboard_scan_enable(0, KB_SCAN_DISABLE_LID_ANGLE);
+	}
+}
+#endif
+
+static int board_is_clamshell(void)
+{
+	/* SKU ID of Limozeen: 4, 5 */
+	return sku_id == 4 || sku_id == 5;
+}
+
+enum battery_cell_type board_get_battery_cell_type(void)
+{
+	/* SKU ID of Limozeen: 4, 5 -> 3S battery */
+	if (sku_id == 4 || sku_id == 5)
+		return BATTERY_CELL_TYPE_3S;
+
+	return BATTERY_CELL_TYPE_UNKNOWN;
+}
+
+static void board_update_sensor_config_from_sku(void)
+{
+	if (board_is_clamshell()) {
+		motion_sensor_count = 0;
+		gmr_tablet_switch_disable();
+		/* The base accel is not stuffed; don't allow line to float */
+		gpio_set_flags(GPIO_ACCEL_GYRO_INT_L,
+			       GPIO_INPUT | GPIO_PULL_DOWN);
+	} else {
+		motion_sensor_count = ARRAY_SIZE(motion_sensors);
+		/* Enable interrupt for the base accel sensor */
+		gpio_enable_interrupt(GPIO_ACCEL_GYRO_INT_L);
+	}
+}
+
+/* Read SKU ID from GPIO and initialize variables for board variants */
+static void sku_init(void)
+{
+	uint8_t val = 0;
+
+	if (gpio_get_level(GPIO_SKU_ID0))
+		val |= 0x01;
+	if (gpio_get_level(GPIO_SKU_ID1))
+		val |= 0x02;
+	if (gpio_get_level(GPIO_SKU_ID2))
+		val |= 0x04;
+
+	sku_id = val;
+	CPRINTS("SKU: %u", sku_id);
+
+	board_update_sensor_config_from_sku();
+}
+DECLARE_HOOK(HOOK_INIT, sku_init, HOOK_PRIO_INIT_I2C + 1);
+
+static int board_has_ln9310(void)
+{
+	static int ln9310_present = -1;
+	int status, val;
+
+	/* Cache the status of LN9310 present or not */
+	if (ln9310_present == -1) {
+		status = i2c_read8(ln9310_config.i2c_port,
+				   ln9310_config.i2c_addr_flags,
+				   LN9310_REG_CHIP_ID,
+				   &val);
+
+		/*
+		 * Any error reading LN9310 CHIP_ID over I2C means the chip
+		 * not present. Fallback to use DA9313 switchcap.
+		 */
+		ln9310_present = !status && val == LN9310_CHIP_ID;
+	}
+
+	return ln9310_present;
+}
+
+static void board_switchcap_init(void)
+{
+	if (board_has_ln9310()) {
+		CPRINTS("Use switchcap: LN9310");
+
+		/* Configure and enable interrupt for LN9310 */
+		gpio_set_flags(GPIO_SWITCHCAP_PG_INT_L, GPIO_INT_FALLING);
+		gpio_enable_interrupt(GPIO_SWITCHCAP_PG_INT_L);
+
+		/*
+		 * Configure LN9310 enable, open-drain output. Don't set the
+		 * level here; otherwise, it will override its value and
+		 * shutdown the switchcap when sysjump to RW.
+		 *
+		 * Note that the gpio.inc configures it GPIO_OUT_LOW. When
+		 * sysjump to RW, will output push-pull a short period of
+		 * time. As it outputs LOW, should be fine.
+		 *
+		 * This GPIO changes like:
+		 * (1) EC boots from RO -> high-Z
+		 * (2) GPIO init according to gpio.inc -> push-pull LOW
+		 * (3) This function configures it -> open-drain HIGH
+		 * (4) Power sequence turns on the switchcap -> open-drain LOW
+		 * (5) EC sysjumps to RW
+		 * (6) GPIO init according to gpio.inc -> push-pull LOW
+		 * (7) This function configures it -> open-drain LOW
+		 */
+		gpio_set_flags(GPIO_SWITCHCAP_ON_L,
+			       GPIO_OUTPUT | GPIO_OPEN_DRAIN);
+
+		/* Only configure the switchcap if not sysjump */
+		if (!system_jumped_late()) {
+			/*
+			 * Deassert the enable pin (set it HIGH), so the
+			 * switchcap won't be enabled after the switchcap is
+			 * configured from standby mode to switching mode.
+			 */
+			gpio_set_level(GPIO_SWITCHCAP_ON_L, 1);
+			ln9310_init();
+		}
+	} else {
+		CPRINTS("Use switchcap: DA9313");
+
+		/*
+		 * When the chip in power down mode, it outputs high-Z.
+		 * Set pull-down to avoid floating.
+		 */
+		gpio_set_flags(GPIO_DA9313_GPIO0, GPIO_INPUT | GPIO_PULL_DOWN);
+
+		/*
+		 * Configure DA9313 enable, push-pull output. Don't set the
+		 * level here; otherwise, it will override its value and
+		 * shutdown the switchcap when sysjump to RW.
+		 */
+		gpio_set_flags(GPIO_SWITCHCAP_ON, GPIO_OUTPUT);
+	}
+}
+
+/* Initialize board. */
+static void board_init(void)
+{
+	/* Enable BC1.2 VBUS detection */
+	gpio_enable_interrupt(GPIO_USB_C0_VBUS_DET_L);
+	gpio_enable_interrupt(GPIO_USB_C1_VBUS_DET_L);
+
+	/* Enable BC1.2 interrupts */
+	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_L);
+	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_L);
+
+	/*
+	 * The H1 SBU line for CCD are behind PPC chip. The PPC internal FETs
+	 * for SBU may be disconnected after DP alt mode is off. Should enable
+	 * the CCD_MODE_ODL interrupt to make sure the SBU FETs are connected.
+	 */
+	gpio_enable_interrupt(GPIO_CCD_MODE_ODL);
+
+	/* Set the backlight duty cycle to 0. AP will override it later. */
+	pwm_set_duty(PWM_CH_DISPLIGHT, 0);
+
+	board_switchcap_init();
+}
+DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
+
+void board_tcpc_init(void)
+{
+	/* Only reset TCPC if not sysjump */
+	if (!system_jumped_late()) {
+		/* TODO(crosbug.com/p/61098): How long do we need to wait? */
+		board_reset_pd_mcu();
+	}
+
+	/* Enable PPC interrupts */
+	gpio_enable_interrupt(GPIO_USB_C0_SWCTL_INT_ODL);
+
+	/* Enable TCPC interrupts */
+	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);
+
+	/*
+	 * Initialize HPD to low; after sysjump SOC needs to see
+	 * HPD pulse to enable video path
+	 */
+	for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port)
+		usb_mux_hpd_update(port, 0, 0);
+}
+DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C+1);
+
+/* Called on AP S0 -> S3 transition */
+static void board_chipset_suspend(void)
+{
+	/*
+	 * Turn off display backlight in S3. AP has its own control. The EC's
+	 * and the AP's will be AND'ed together in hardware.
+	 */
+	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 0);
+	pwm_enable(PWM_CH_DISPLIGHT, 0);
+}
+DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);
+
+/* Called on AP S3 -> S0 transition */
+static void board_chipset_resume(void)
+{
+	/* Turn on display and keyboard backlight in S0. */
+	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 1);
+	if (pwm_get_duty(PWM_CH_DISPLIGHT))
+		pwm_enable(PWM_CH_DISPLIGHT, 1);
+}
+DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);
+
+void board_set_switchcap_power(int enable)
+{
+	if (board_has_ln9310())
+		gpio_set_level(GPIO_SWITCHCAP_ON_L, !enable);
+	else
+		gpio_set_level(GPIO_SWITCHCAP_ON, enable);
+}
+
+int board_is_switchcap_enabled(void)
+{
+	if (board_has_ln9310())
+		return !gpio_get_level(GPIO_SWITCHCAP_ON_L);
+	else
+		return gpio_get_level(GPIO_SWITCHCAP_ON);
+}
+
+int board_is_switchcap_power_good(void)
+{
+	if (board_has_ln9310())
+		return ln9310_power_good();
+	else
+		return gpio_get_level(GPIO_DA9313_GPIO0);
+}
+
+void board_reset_pd_mcu(void)
+{
+	cprints(CC_USB, "Resetting TCPCs...");
+	cflush();
+
+	gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
+	gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
+	msleep(PS8XXX_RESET_DELAY_MS);
+	gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
+	gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
+}
+
+void board_set_tcpc_power_mode(int port, int mode)
+{
+	/* Ignore the "mode" to turn the chip on.  We can only do a reset. */
+	if (mode)
+		return;
+
+	board_reset_pd_mcu();
+}
+
+int board_vbus_sink_enable(int port, int enable)
+{
+	/* Both ports are controlled by PPC SN5S330 */
+	return ppc_vbus_sink_enable(port, enable);
+}
+
+int board_is_sourcing_vbus(int port)
+{
+	/* Both ports are controlled by PPC SN5S330 */
+	return ppc_is_sourcing_vbus(port);
+}
+
+void board_overcurrent_event(int port, int is_overcurrented)
+{
+	/* TODO(b/120231371): Notify AP */
+	CPRINTS("p%d: overcurrent!", port);
+}
+
+int board_set_active_charge_port(int port)
+{
+	int is_real_port = (port >= 0 &&
+			    port < CONFIG_USB_PD_PORT_MAX_COUNT);
+	int i;
+
+	if (!is_real_port && port != CHARGE_PORT_NONE)
+		return EC_ERROR_INVAL;
+
+	if (port == CHARGE_PORT_NONE) {
+		CPRINTS("Disabling all charging port");
+
+		/* Disable all ports. */
+		for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
+			/*
+			 * Do not return early if one fails otherwise we can
+			 * get into a boot loop assertion failure.
+			 */
+			if (board_vbus_sink_enable(i, 0))
+				CPRINTS("Disabling p%d sink path failed.", i);
+		}
+
+		return EC_SUCCESS;
+	}
+
+	/* Check if the port is sourcing VBUS. */
+	if (board_is_sourcing_vbus(port)) {
+		CPRINTS("Skip enable p%d", port);
+		return EC_ERROR_INVAL;
+	}
+
+
+	CPRINTS("New charge port: p%d", port);
+
+	/*
+	 * Turn off the other ports' sink path FETs, before enabling the
+	 * requested charge port.
+	 */
+	for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
+		if (i == port)
+			continue;
+
+		if (board_vbus_sink_enable(i, 0))
+			CPRINTS("p%d: sink path disable failed.", i);
+	}
+
+	/* Enable requested charge port. */
+	if (board_vbus_sink_enable(port, 1)) {
+		CPRINTS("p%d: sink path enable failed.", port);
+		return EC_ERROR_UNKNOWN;
+	}
+
+	return EC_SUCCESS;
+}
+
+void board_set_charge_limit(int port, int supplier, int charge_ma,
+			    int max_ma, int charge_mv)
+{
+	/*
+	 * Ignore lower charge ceiling on PD transition if our battery is
+	 * critical, as we may brownout.
+	 */
+	if (supplier == CHARGE_SUPPLIER_PD &&
+	    charge_ma < 1500 &&
+	    charge_get_percent() < CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON) {
+		CPRINTS("Using max ilim %d", max_ma);
+		charge_ma = max_ma;
+	}
+
+	charge_set_input_current_limit(MAX(charge_ma,
+					   CONFIG_CHARGER_INPUT_CURRENT),
+				       charge_mv);
+}
+
+uint16_t tcpc_get_alert_status(void)
+{
+	uint16_t status = 0;
+
+	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL))
+		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
+			status |= PD_STATUS_TCPC_ALERT_0;
+	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL))
+		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
+			status |= PD_STATUS_TCPC_ALERT_1;
+
+	return status;
+}
+