collis: Initial EC image

Create the initial EC image for the collis variant by copying the
copano reference board EC files into a new directory named for
the variant.

(Auto-Generated by create_initial_ec_image.sh version 1.5.0).

BUG=b:182227204
BRANCH=None
TEST=make BOARD=collis

Signed-off-by: Michael5 Chen1 <michael5_chen1@pegatron.corp-partner.google.com>
Change-Id: Idd409872bf244651d138dd2a102e084cc6349498
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2747557
Reviewed-by: Jacky Wang <jacky5_wang@pegatron.corp-partner.google.com>
Reviewed-by: Keith Short <keithshort@chromium.org>
Commit-Queue: Keith Short <keithshort@chromium.org>

1 files changed, 426 insertions, 0 deletions

diff --git a/board/collis/board.c b/board/collis/board.c
new file mode 100644
index 0000000000..cc02f855c2
--- /dev/null
+++ b/board/collis/board.c
@@ -0,0 +1,426 @@
+/* Copyright 2021 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Volteer board-specific configuration */
+#include "bb_retimer.h"
+#include "button.h"
+#include "common.h"
+#include "accelgyro.h"
+#include "cbi_ec_fw_config.h"
+#include "driver/accel_bma2x2.h"
+#include "driver/accelgyro_bmi160.h"
+#include "driver/bc12/pi3usb9201.h"
+#include "driver/ppc/syv682x.h"
+#include "driver/tcpm/tcpci.h"
+#include "driver/tcpm/rt1715.h"
+#include "driver/retimer/bb_retimer.h"
+#include "driver/sync.h"
+#include "extpower.h"
+#include "fan.h"
+#include "fan_chip.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "keyboard_scan.h"
+#include "lid_switch.h"
+#include "power.h"
+#include "power_button.h"
+#include "pwm.h"
+#include "pwm_chip.h"
+#include "switch.h"
+#include "system.h"
+#include "task.h"
+#include "tablet_mode.h"
+#include "throttle_ap.h"
+#include "uart.h"
+#include "usb_mux.h"
+#include "usb_pd.h"
+#include "usb_pd_tbt.h"
+#include "usb_pd_tcpm.h"
+#include "usbc_ppc.h"
+#include "util.h"
+
+#include "gpio_list.h" /* Must come after other header files. */
+
+#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
+
+/* Keyboard scan setting */
+struct keyboard_scan_config keyscan_config = {
+	/* Increase from 50 us, because KSO_02 passes through the H1. */
+	.output_settle_us = 80,
+	/* Other values should be the same as the default configuration. */
+	.debounce_down_us = 9 * MSEC,
+	.debounce_up_us = 30 * MSEC,
+	.scan_period_us = 3 * MSEC,
+	.min_post_scan_delay_us = 1000,
+	.poll_timeout_us = 100 * MSEC,
+	.actual_key_mask = {
+		0x1c, 0xfe, 0xff, 0xff, 0xff, 0xf5, 0xff,
+		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
+	},
+};
+
+static const struct ec_response_keybd_config copano_kb = {
+	.num_top_row_keys = 10,
+	.action_keys = {
+		TK_BACK,		/* T1 */
+		TK_REFRESH,		/* T2 */
+		TK_FULLSCREEN,		/* T3 */
+		TK_OVERVIEW,		/* T4 */
+		TK_SNAPSHOT,		/* T5 */
+		TK_BRIGHTNESS_DOWN,	/* T6 */
+		TK_BRIGHTNESS_UP,	/* T7 */
+		TK_VOL_MUTE,		/* T8 */
+		TK_VOL_DOWN,		/* T9 */
+		TK_VOL_UP,		/* T10 */
+	},
+	.capabilities = KEYBD_CAP_SCRNLOCK_KEY,
+};
+
+__override const struct ec_response_keybd_config
+*board_vivaldi_keybd_config(void)
+{
+	return &copano_kb;
+}
+
+/******************************************************************************/
+/*
+ * FW_CONFIG defaults for Terrador if the CBI data is not initialized.
+ */
+union volteer_cbi_fw_config fw_config_defaults = {
+	.usb_db = DB_USB3_PASSIVE,
+};
+
+static void board_init(void)
+{
+
+}
+DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
+
+/******************************************************************************/
+/* I2C port map configuration */
+const struct i2c_port_t i2c_ports[] = {
+	{
+		.name = "sensor",
+		.port = I2C_PORT_SENSOR,
+		.kbps = 400,
+		.scl = GPIO_EC_I2C0_SENSOR_SCL,
+		.sda = GPIO_EC_I2C0_SENSOR_SDA,
+	},
+	{
+		.name = "usb_c0",
+		.port = I2C_PORT_USB_C0,
+		.kbps = 1000,
+		.scl = GPIO_EC_I2C1_USB_C0_SCL,
+		.sda = GPIO_EC_I2C1_USB_C0_SDA,
+	},
+	{
+		.name = "usb_c1",
+		.port = I2C_PORT_USB_C1,
+		.kbps = 1000,
+		.scl = GPIO_EC_I2C2_USB_C1_SCL,
+		.sda = GPIO_EC_I2C2_USB_C1_SDA,
+	},
+	{
+		.name = "usb_0_mix",
+		.port = I2C_PORT_USB_0_MIX,
+		.kbps = 100,
+		.scl = GPIO_EC_I2C3_USB_0_MIX_SCL,
+		.sda = GPIO_EC_I2C3_USB_0_MIX_SDA,
+	},
+	{
+		.name = "usb_1_mix",
+		.port = I2C_PORT_USB_1_MIX,
+		.kbps = 100,
+		.scl = GPIO_EC_I2C4_USB_1_MIX_SCL,
+		.sda = GPIO_EC_I2C4_USB_1_MIX_SDA,
+	},
+	{
+		.name = "power",
+		.port = I2C_PORT_POWER,
+		.kbps = 100,
+		.scl = GPIO_EC_I2C5_POWER_SCL,
+		.sda = GPIO_EC_I2C5_POWER_SDA,
+	},
+	{
+		.name = "eeprom",
+		.port = I2C_PORT_EEPROM,
+		.kbps = 400,
+		.scl = GPIO_EC_I2C7_EEPROM_SCL,
+		.sda = GPIO_EC_I2C7_EEPROM_SDA,
+	},
+};
+const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
+
+/******************************************************************************/
+/* PWM configuration */
+const struct pwm_t pwm_channels[] = {
+	[PWM_CH_KBLIGHT] = {
+		.channel = 3,
+		.flags = 0,
+		/*
+		 * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
+		 * flicker. Higher frequencies consume similar average power to
+		 * lower PWM frequencies, but higher frequencies record a much
+		 * lower maximum power.
+		 */
+		.freq = 2400,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
+
+/******************************************************************************/
+/* EC thermal management configuration */
+
+/*
+ * Tiger Lake specifies 100 C as maximum TDP temperature.  THRMTRIP# occurs at
+ * 130 C.  However, sensor is located next to DDR, so we need to use the lower
+ * DDR temperature limit (85 C)
+ */
+const static struct ec_thermal_config thermal_cpu = {
+	.temp_host = {
+		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
+		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
+	},
+	.temp_host_release = {
+		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
+	},
+	.temp_fan_off = C_TO_K(35),
+	.temp_fan_max = C_TO_K(50),
+};
+
+/*
+ * Inductor limits - used for both charger and PP3300 regulator
+ *
+ * Need to use the lower of the charger IC, PP3300 regulator, and the inductors
+ *
+ * Charger max recommended temperature 100C, max absolute temperature 125C
+ * PP3300 regulator: operating range -40 C to 145 C
+ *
+ * Inductors: limit of 125c
+ * PCB: limit is 80c
+ */
+const static struct ec_thermal_config thermal_inductor = {
+	.temp_host = {
+		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
+		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
+	},
+	.temp_host_release = {
+		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
+	},
+	.temp_fan_off = C_TO_K(40),
+	.temp_fan_max = C_TO_K(55),
+};
+
+
+struct ec_thermal_config thermal_params[] = {
+	[TEMP_SENSOR_1_CHARGER]			= thermal_inductor,
+	[TEMP_SENSOR_2_PP3300_REGULATOR]	= thermal_inductor,
+	[TEMP_SENSOR_3_DDR_SOC]			= thermal_cpu,
+	[TEMP_SENSOR_4_FAN]			= thermal_cpu,
+};
+BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
+
+/******************************************************************************/
+
+static void kb_backlight_enable(void)
+{
+	gpio_set_level(GPIO_EC_KB_BL_EN, 1);
+}
+DECLARE_HOOK(HOOK_CHIPSET_RESUME, kb_backlight_enable, HOOK_PRIO_DEFAULT);
+
+static void kb_backlight_disable(void)
+{
+	gpio_set_level(GPIO_EC_KB_BL_EN, 0);
+}
+DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, kb_backlight_disable, HOOK_PRIO_DEFAULT);
+
+void board_reset_pd_mcu(void)
+{
+	/* TODO(b/159025015): Terrador: check USB PD reset operation */
+}
+
+/* USBC mux configuration - Tiger Lake includes internal mux */
+struct usb_mux usbc0_usb4_mb_retimer = {
+	.usb_port = USBC_PORT_C0,
+	.driver = &bb_usb_retimer,
+	.i2c_port = I2C_PORT_USB_0_MIX,
+	.i2c_addr_flags = USBC_PORT_C0_BB_RETIMER_I2C_ADDR,
+};
+/*****************************************************************************
+ * USB-C MUX/Retimer dynamic configuration.
+ */
+static void setup_mux(void)
+{
+	CPRINTS("C0 supports bb-retimer");
+	/* USB-C port 0 have a retimer */
+	usb_muxes[USBC_PORT_C0].next_mux = &usbc0_usb4_mb_retimer;
+}
+
+__override void board_cbi_init(void)
+{
+	/*
+	 * TODO(b/159025015): Terrador: check FW_CONFIG fields for USB DB type
+	 */
+	setup_mux();
+	/* Reassign USB_C0_RT_RST_ODL */
+	bb_controls[USBC_PORT_C0].usb_ls_en_gpio = GPIO_USB_C0_LS_EN;
+	bb_controls[USBC_PORT_C0].retimer_rst_gpio = GPIO_USB_C0_RT_RST_ODL;
+
+}
+
+/******************************************************************************/
+/* USBC PPC configuration */
+struct ppc_config_t ppc_chips[] = {
+	[USBC_PORT_C0] = {
+		.i2c_port = I2C_PORT_USB_C0,
+		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
+		.drv = &syv682x_drv,
+	},
+	[USBC_PORT_C1] = {
+		.i2c_port = I2C_PORT_USB_C1,
+		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
+		.drv = &syv682x_drv,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
+unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
+
+/******************************************************************************/
+/* PPC support routines */
+void ppc_interrupt(enum gpio_signal signal)
+{
+	switch (signal) {
+	case GPIO_USB_C0_PPC_INT_ODL:
+		syv682x_interrupt(USBC_PORT_C0);
+		break;
+	case GPIO_USB_C1_PPC_INT_ODL:
+		syv682x_interrupt(USBC_PORT_C1);
+	default:
+		break;
+	}
+}
+
+/******************************************************************************/
+/* BC1.2 charger detect configuration */
+const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
+	[USBC_PORT_C0] = {
+		.i2c_port = I2C_PORT_USB_C0,
+		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
+	},
+	[USBC_PORT_C1] = {
+		.i2c_port = I2C_PORT_USB_C1,
+		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
+
+/******************************************************************************/
+/* USBC TCPC configuration */
+const struct tcpc_config_t tcpc_config[] = {
+	[USBC_PORT_C0] = {
+		.bus_type = EC_BUS_TYPE_I2C,
+		.i2c_info = {
+			.port = I2C_PORT_USB_C0,
+			.addr_flags = RT1715_I2C_ADDR_FLAGS,
+		},
+		.drv = &rt1715_tcpm_drv,
+	},
+	[USBC_PORT_C1] = {
+		.bus_type = EC_BUS_TYPE_I2C,
+		.i2c_info = {
+			.port = I2C_PORT_USB_C1,
+			.addr_flags = RT1715_I2C_ADDR_FLAGS,
+		},
+		.drv = &rt1715_tcpm_drv,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
+BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
+
+/******************************************************************************/
+/* USBC mux configuration - Tiger Lake includes internal mux */
+struct usb_mux usbc1_tcss_usb_mux = {
+	.usb_port = USBC_PORT_C1,
+	.driver = &virtual_usb_mux_driver,
+	.hpd_update = &virtual_hpd_update,
+};
+struct usb_mux usb_muxes[] = {
+	[USBC_PORT_C0] = {
+		.usb_port = USBC_PORT_C0,
+		.driver = &virtual_usb_mux_driver,
+		.hpd_update = &virtual_hpd_update,
+	},
+	[USBC_PORT_C1] = {
+		.usb_port = USBC_PORT_C1,
+		.next_mux = &usbc1_tcss_usb_mux,
+		.driver = &bb_usb_retimer,
+		.i2c_port = I2C_PORT_USB_1_MIX,
+		.i2c_addr_flags = USBC_PORT_C1_BB_RETIMER_I2C_ADDR,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
+
+struct bb_usb_control bb_controls[] = {
+	[USBC_PORT_C0] = {
+		/* USB-C port 0 doesn't have a retimer */
+	},
+	[USBC_PORT_C1] = {
+		.usb_ls_en_gpio = GPIO_USB_C1_LS_EN,
+		.retimer_rst_gpio = GPIO_USB_C1_RT_RST_ODL,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(bb_controls) == USBC_PORT_COUNT);
+
+static void board_tcpc_init(void)
+{
+	/* Don't reset TCPCs after initial reset */
+	if (!system_jumped_late())
+		board_reset_pd_mcu();
+
+	/* Enable PPC interrupts. */
+	gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
+
+	/* Enable TCPC interrupts. */
+	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
+
+	/* Enable BC1.2 interrupts. */
+	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
+}
+DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);
+
+/******************************************************************************/
+/* TCPC support routines */
+uint16_t tcpc_get_alert_status(void)
+{
+	uint16_t status = 0;
+
+	/*
+	 * Check which port has the ALERT line set
+	 */
+	if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL))
+		status |= PD_STATUS_TCPC_ALERT_0;
+	if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL))
+		status |= PD_STATUS_TCPC_ALERT_1;
+
+	return status;
+}
+
+int ppc_get_alert_status(int port)
+{
+	if (port == USBC_PORT_C0)
+		return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
+	else
+		return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0;
+}
+
+/******************************************************************************/
+/* USB-A charging control */
+const int usb_port_enable[USB_PORT_COUNT] = {
+	GPIO_EN_PP5000_USBA,
+};
+