diff options
| author | Scott Collyer <scollyer@google.com> | 2017-08-22 10:42:20 -0700 |
|---|---|---|
| committer | chrome-bot <chrome-bot@chromium.org> | 2017-08-23 21:17:23 -0700 |
| commit | 8eea86766b02055a615b261739e2272ba1531b10 (patch) | |
| tree | 63f41b22913ccb770d36656028b9b3ec3cc11073 /board/coral/board.h | |
| parent | 0aa4bfe9a3d906a210e27ee40c22e30b3658533a (diff) | |
| download | chrome-ec-8eea86766b02055a615b261739e2272ba1531b10.tar.gz | |
coral: Enable TCPC init to happen in pd_task init
This CL enables the config option CONFIG_USB_PD_TCPC_BOARD_INIT and
modifies the board level tcpc init function to wait up to 2 seconds
to ensure that the battery is out of its disconnected state.
This change was put into Eve to ensure the PD chips are not reset until
the battery is out of disconnect and delay start of the pd_task
(and PD negotiation) until the battery is out of disconnect state.
This is part of a change was initially done on Eve
https://chromium-review.googlesource.com/c/592716.
For Coral the delay of tcpc init relative to the PD task also
addresses an issue where VBUS would be dropped by the external charger
when attempting to boot with no battery connected. When no battery is
connected there is a timing issue between the Analogix TCPC and the EC
related to when the TCPC sends its auto GOODCRC. This results in a
hard reset which causes the drop of VBUS.
BUG=b:64375688
BRANCH=none
TEST=Tested by Bitland using 500 iterations and showed no occurrence
of the hard reset causing VBUS to drop. Prior to this CL, the failure
rate was 1 out 300 attempts.
Change-Id: I28fe3266eb1c0a2940e1bdacee65cf4e642d3483
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/627115
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'board/coral/board.h')
| -rw-r--r-- | board/coral/board.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/board/coral/board.h b/board/coral/board.h index c3f06eda65..6523cc2ff1 100644 --- a/board/coral/board.h +++ b/board/coral/board.h @@ -87,6 +87,7 @@ #define CONFIG_USB_PD_PORT_COUNT 2 #define CONFIG_USB_PD_QUIRK_SLOW_CC_STATUS #define CONFIG_USB_PD_VBUS_DETECT_CHARGER +#define CONFIG_USB_PD_TCPC_BOARD_INIT #define CONFIG_USB_PD_TCPC_LOW_POWER #define CONFIG_USB_PD_TCPM_MUX /* for both PS8751 and ANX3429 */ #define CONFIG_USB_PD_TCPM_ANX74XX @@ -326,6 +327,7 @@ void board_reset_pd_mcu(void); int board_get_version(void); void board_set_tcpc_power_mode(int port, int mode); +void board_tcpc_init(void); /* Sensors without hardware FIFO are in forced mode */ #define CONFIG_ACCEL_FORCE_MODE_MASK \ |