Fleex: implement LED behavior

This change adds the charger LED behavior for fleex.  Since fleex isn't
actually using a power LED, removed the GPIO referencing it.

BRANCH=none
BUG=b:109872754
TEST=ran through all charger and power states on the fleex to confirm
correct LED behavior

Change-Id: Ia0952587075026c6e2cbe20dcd7ccc6746442df1
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1159355
Reviewed-by: Jett Rink <jettrink@chromium.org>

1 files changed, 79 insertions, 0 deletions

diff --git a/board/fleex/led.c b/board/fleex/led.c
new file mode 100644
index 0000000000..3b0280d299
--- /dev/null
+++ b/board/fleex/led.c
@@ -0,0 +1,79 @@
+/* Copyright 2018 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Power and battery LED control for Fleex
+ */
+
+#include "ec_commands.h"
+#include "gpio.h"
+#include "led_common.h"
+#include "led_states.h"
+
+#define LED_OFF_LVL	1
+#define LED_ON_LVL	0
+
+const int led_charge_lvl_1;
+
+const int led_charge_lvl_2 = 100;
+
+/* Fleex: Note there is only LED for charge / power */
+const struct led_descriptor
+			led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
+	/*
+	 * NOTE: STATE_CHARGING_LVL_1 shouldn't be reachable and should cause
+	 *	 an error print to the console
+	 */
+	[STATE_CHARGING_LVL_2]	     = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
+	[STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
+	[STATE_DISCHARGE_S0]	     = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
+	[STATE_DISCHARGE_S3]	     = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC},
+					{LED_OFF,            1 * LED_ONE_SEC} },
+	[STATE_DISCHARGE_S5]         = {{LED_OFF,            LED_INDEFINITE} },
+	[STATE_BATTERY_ERROR]        = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
+					{LED_OFF,	     1 * LED_ONE_SEC} },
+	[STATE_FACTORY_TEST]         = {{EC_LED_COLOR_WHITE, 2 * LED_ONE_SEC},
+					{EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} },
+};
+BUILD_ASSERT(ARRAY_SIZE(led_bat_state_table) == LED_NUM_STATES);
+
+const enum ec_led_id supported_led_ids[] = { EC_LED_ID_BATTERY_LED };
+
+const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
+
+void led_set_color_battery(enum ec_led_colors color)
+{
+	switch (color) {
+	case EC_LED_COLOR_WHITE:
+		gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_ON_LVL);
+		gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_OFF_LVL);
+		break;
+	case EC_LED_COLOR_AMBER:
+		gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_OFF_LVL);
+		gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_ON_LVL);
+		break;
+	default: /* LED_OFF and other unsupported colors */
+		gpio_set_level(GPIO_LED_1_PWR_WHITE_L, LED_OFF_LVL);
+		gpio_set_level(GPIO_LED_2_CHG_AMBER_L, LED_OFF_LVL);
+		break;
+	}
+}
+
+void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
+{
+	brightness_range[EC_LED_COLOR_WHITE] = 1;
+	brightness_range[EC_LED_COLOR_AMBER] = 1;
+}
+
+int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
+{
+	if (brightness[EC_LED_COLOR_WHITE] != 0)
+		led_set_color_battery(EC_LED_COLOR_WHITE);
+	else if (brightness[EC_LED_COLOR_AMBER] != 0)
+		led_set_color_battery(EC_LED_COLOR_AMBER);
+	else
+		led_set_color_battery(LED_OFF);
+
+	return EC_SUCCESS;
+}
+