diff options
| author | Diana Z <dzigterman@chromium.org> | 2019-03-14 14:49:36 -0600 |
|---|---|---|
| committer | Diana Z <dzigterman@chromium.org> | 2019-03-20 22:48:57 +0000 |
| commit | 6e4fcc3c4f840df5ec295656737752d8c66253e6 (patch) | |
| tree | d6a4ea892252bb7caffbb349c8a77db221f8dd40 /board/fleex | |
| parent | f5e3d45ffc068ef5dcb2d5c265d292b60aab9514 (diff) | |
| download | chrome-ec-6e4fcc3c4f840df5ec295656737752d8c66253e6.tar.gz | |
Fleex: Remove support for board version 0
At this point, support can be removed for board version 0. This leaves
the board code cleaner and provides a better starting point for any
follower projects.
BUG=b:128413812
BRANCH=octopus
TEST=builds
Change-Id: Ibdf9cdea5ef930ae3ff566679e5ecff9c9c78959
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1525065
Reviewed-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Diffstat (limited to 'board/fleex')
| -rw-r--r-- | board/fleex/board.c | 30 | ||||
| -rw-r--r-- | board/fleex/gpio.inc | 6 |
2 files changed, 1 insertions, 35 deletions
diff --git a/board/fleex/board.c b/board/fleex/board.c index 8026c1c007..d76c1e5dd6 100644 --- a/board/fleex/board.c +++ b/board/fleex/board.c @@ -250,36 +250,6 @@ void lid_angle_peripheral_enable(int enable) } #endif -/* - * Set gpio flags based on board ID, can be removed when proto is no longer - * supported - */ -static void update_gpios_from_board_id(void) -{ - uint32_t board_id = 0; - - /* Errors will count as board_id 0 */ - cbi_get_board_version(&board_id); - - if (board_id == 0) { - /* - * USB2_OTG_ID is a 1.8V pin on the SoC side with an internal - * pull-up. However, it is 3.3V on the EC side. So, configure - * it as ODR so that the EC never drives it high. - */ - gpio_set_flags(GPIO_USB_C0_PD_RST, GPIO_ODR_LOW); - } else { - int flags = GPIO_OUTPUT; - - if (!system_is_reboot_warm() && !system_jumped_to_this_image()) - flags |= GPIO_LOW; - - gpio_set_flags(GPIO_USB_C0_PD_RST, flags); - } -} - -DECLARE_HOOK(HOOK_INIT, update_gpios_from_board_id, HOOK_PRIO_INIT_I2C + 1); - void board_overcurrent_event(int port, int is_overcurrented) { /* Sanity check the port. */ diff --git a/board/fleex/gpio.inc b/board/fleex/gpio.inc index 41488ad974..6993acd251 100644 --- a/board/fleex/gpio.inc +++ b/board/fleex/gpio.inc @@ -116,11 +116,7 @@ GPIO(EN_USB_A0_5V, PIN(6, 7), GPIO_OUT_LOW) /* Enable A0 5V Charging */ GPIO(EN_USB_A1_5V, PIN(9, 6), GPIO_OUT_LOW) /* Enable A1 5V Charging */ GPIO(USB_A0_CHARGE_EN_L, PIN(A, 2), GPIO_OUT_HIGH) /* Enable A0 1.5A Charging */ GPIO(USB_A1_CHARGE_EN_L, PIN(A, 0), GPIO_OUT_HIGH) /* Enable A1 1.5A Charging */ -/* - * Proto USB2_OTG_ID pin - * Configure as default since on proto boards this pin should not be driven high - */ -GPIO(USB_C0_PD_RST, PIN(8, 3), GPIO_DEFAULT) /* C0 PD Reset */ +GPIO(USB_C0_PD_RST, PIN(8, 3), GPIO_OUT_LOW) /* C0 PD Reset */ GPIO(USB_C0_BC12_VBUS_ON, PIN(6, 3), GPIO_OUT_LOW) /* C0 BC1.2 Power */ GPIO(USB_C0_BC12_CHG_DET_L, PIN(9, 5), GPIO_INPUT) /* C0 BC1.2 Detect */ GPIO(USB_C0_HPD_1V8_ODL, PIN(C, 5), GPIO_INPUT | /* C0 DP Hotplug Detect */ |