board/gumboz/board.h: Format with clang-format

BUG=b:236386294
BRANCH=none
TEST=none

Change-Id: Ibfd25d222c096ed0301d9311cd6d3923b48e9cf0
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3728434
Reviewed-by: Jeremy Bettis <jbettis@chromium.org>

1 files changed, 30 insertions, 53 deletions

diff --git a/board/gumboz/board.h b/board/gumboz/board.h
index 42e2b23c32..415d797132 100644
--- a/board/gumboz/board.h
+++ b/board/gumboz/board.h
@@ -20,7 +20,7 @@
 #define CONFIG_USB_PD_PORT_MAX_COUNT 2
 #define CONFIG_USB_PORT_ENABLE_DYNAMIC
 
-#undef  CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON
+#undef CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON
 #define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 40000
 
 #define CONFIG_CHARGER_PROFILE_OVERRIDE
@@ -38,7 +38,7 @@
 #define CONFIG_ACCELGYRO_LSM6DSM
 #define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
 	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ACCEL_KX022		/* Lid accel */
+#define CONFIG_ACCEL_KX022 /* Lid accel */
 #define CONFIG_CMD_ACCELS
 #define CONFIG_CMD_ACCEL_INFO
 #define CONFIG_TABLET_MODE
@@ -48,42 +48,36 @@
 #define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
 #define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
 
-
-
 /* GPIO mapping from board specific name to EC common name. */
-#define CONFIG_BATTERY_PRESENT_GPIO	GPIO_EC_BATT_PRES_ODL
-#define CONFIG_SCI_GPIO			GPIO_EC_FCH_SCI_ODL
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_CPU_PROCHOT		GPIO_PROCHOT_ODL
-#define GPIO_EC_INT_L			GPIO_EC_AP_INT_ODL
-#define GPIO_ENABLE_BACKLIGHT_L		GPIO_EC_EDP_BL_DISABLE
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_FCH_PWR_BTN_L
-#define GPIO_PCH_RSMRST_L		GPIO_EC_FCH_RSMRST_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GPIO_PCH_SLP_S5_L		GPIO_SLP_S5_L
-#define GPIO_PCH_SYS_PWROK		GPIO_EC_FCH_PWROK
-#define GPIO_PCH_WAKE_L			GPIO_EC_FCH_WAKE_L
-#define GPIO_POWER_BUTTON_L		GPIO_EC_PWR_BTN_ODL
-#define GPIO_S0_PGOOD			GPIO_S0_PWROK_OD
-#define GPIO_S5_PGOOD			GPIO_EC_PWROK_OD
-#define GPIO_SYS_RESET_L		GPIO_EC_SYS_RST_L
-#define GPIO_VOLUME_DOWN_L		GPIO_VOLDN_BTN_ODL
-#define GPIO_VOLUME_UP_L		GPIO_VOLUP_BTN_ODL
-#define GPIO_WP_L			GPIO_EC_WP_L
-#define GPIO_PACKET_MODE_EN		GPIO_EC_H1_PACKET_MODE
+#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL
+#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL
+#define GPIO_AC_PRESENT GPIO_ACOK_OD
+#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL
+#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL
+#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE
+#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW
+#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV
+#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L
+#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L
+#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L
+#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L
+#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK
+#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L
+#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL
+#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD
+#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD
+#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L
+#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL
+#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL
+#define GPIO_WP_L GPIO_EC_WP_L
+#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE
 
 #ifndef __ASSEMBLER__
 
 /* This I2C moved. Temporarily detect and support the V0 HW. */
 extern int I2C_PORT_BATTERY;
 
-enum adc_channel {
-	ADC_TEMP_SENSOR_CHARGER,
-	ADC_TEMP_SENSOR_SOC,
-	ADC_CH_COUNT
-};
+enum adc_channel { ADC_TEMP_SENSOR_CHARGER, ADC_TEMP_SENSOR_SOC, ADC_CH_COUNT };
 
 enum battery_type {
 	BATTERY_SIMPLO_COS,
@@ -95,20 +89,11 @@ enum battery_type {
 	BATTERY_TYPE_COUNT,
 };
 
-enum pwm_channel {
-	PWM_CH_KBLIGHT = 0,
-	PWM_CH_COUNT
-};
+enum pwm_channel { PWM_CH_KBLIGHT = 0, PWM_CH_COUNT };
 
-enum ioex_port {
-	IOEX_C0_NCT3807 = 0,
-	IOEX_C1_NCT3807,
-	IOEX_PORT_COUNT
-};
+enum ioex_port { IOEX_C0_NCT3807 = 0, IOEX_C1_NCT3807, IOEX_PORT_COUNT };
 
-#define PORT_TO_HPD(port) ((port == 0) \
-	? GPIO_USB3_C0_DP2_HPD \
-	: GPIO_DP1_HPD)
+#define PORT_TO_HPD(port) ((port == 0) ? GPIO_USB3_C0_DP2_HPD : GPIO_DP1_HPD)
 
 enum temp_sensor_id {
 	TEMP_SENSOR_CHARGER = 0,
@@ -117,17 +102,9 @@ enum temp_sensor_id {
 	TEMP_SENSOR_COUNT
 };
 
-enum usba_port {
-	USBA_PORT_A0 = 0,
-	USBA_PORT_A1,
-	USBA_PORT_COUNT
-};
+enum usba_port { USBA_PORT_A0 = 0, USBA_PORT_A1, USBA_PORT_COUNT };
 
-enum usbc_port {
-	USBC_PORT_C0 = 0,
-	USBC_PORT_C1,
-	USBC_PORT_COUNT
-};
+enum usbc_port { USBC_PORT_C0 = 0, USBC_PORT_C1, USBC_PORT_COUNT };
 
 /*****************************************************************************
  * CBI EC FW Configuration