gpio: Replace duplication in gpio declarations with X-macro file

Previously each board.h and board.c contained an enum and an array
for gpio definitons that had to be manually kept in sync, with no
compiler assistance other than that their lengths matched.

This change adds a single gpio.inc file that declares all gpio's
that a board uses and is used as an X-macro include file to
generate both the gpio_signal enum and the gpio_list array.

Signed-off-by: Anton Staaf <robotboy@chromium.org>

BRANCH=none
TEST=make buildall -j

Change-Id: If9c9feca968619a59ff9f20701359bcb9374e4da
Reviewed-on: https://chromium-review.googlesource.com/205354
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>

3 files changed, 34 insertions, 57 deletions

diff --git a/board/it8380dev/board.c b/board/it8380dev/board.c
index adad1d73a8..51799ba46a 100644
--- a/board/it8380dev/board.c
+++ b/board/it8380dev/board.c
@@ -22,34 +22,7 @@ void test_interrupt(enum gpio_signal signal)
 	gpio_set_level(GPIO_BUSY_LED, busy_state);
 }
 
-/* GPIO signal list.  Must match order from enum gpio_signal. */
-const struct gpio_info gpio_list[] = {
-	{"H_LED0", GPIO_A, (1<<0), GPIO_ODR_HIGH},
-	{"H_LED1", GPIO_A, (1<<1), GPIO_ODR_HIGH},
-	{"H_LED2", GPIO_A, (1<<2), GPIO_ODR_HIGH},
-	{"H_LED3", GPIO_A, (1<<3), GPIO_ODR_HIGH},
-	{"H_LED4", GPIO_A, (1<<4), GPIO_ODR_HIGH},
-	{"H_LED5", GPIO_A, (1<<5), GPIO_ODR_HIGH},
-	{"H_LED6", GPIO_A, (1<<6), GPIO_ODR_HIGH},
-	{"L_LED0", GPIO_I, (1<<0), GPIO_ODR_HIGH},
-	{"L_LED1", GPIO_I, (1<<1), GPIO_ODR_HIGH},
-	{"L_LED2", GPIO_I, (1<<2), GPIO_ODR_HIGH},
-	{"L_LED3", GPIO_I, (1<<3), GPIO_ODR_HIGH},
-	{"L_LED4", GPIO_I, (1<<4), GPIO_ODR_HIGH},
-	{"L_LED5", GPIO_I, (1<<5), GPIO_ODR_HIGH},
-	{"L_LED6", GPIO_I, (1<<6), GPIO_ODR_HIGH},
-	{"BUSY_LED", GPIO_J, (1<<0), GPIO_OUT_LOW},
-	{"GOOD_LED", GPIO_J, (1<<1), GPIO_OUT_HIGH},
-	{"FAIL_LED", GPIO_J, (1<<2), GPIO_OUT_LOW},
-	{"SW0", GPIO_E, (1<<0), GPIO_INPUT},
-	{"SW1", GPIO_E, (1<<1), GPIO_INPUT | GPIO_PULL_DOWN},
-	{"SW2", GPIO_E, (1<<2), GPIO_INPUT | GPIO_PULL_DOWN},
-	{"SW3", GPIO_E, (1<<3), GPIO_INPUT | GPIO_PULL_DOWN},
-	{"START_SW", GPIO_E, (1<<4), GPIO_INT_FALLING, test_interrupt},
-	/* Unimplemented signals which we need to emulate for now */
-	GPIO_SIGNAL_NOT_IMPLEMENTED("ENTERING_RW"),
-};
-BUILD_ASSERT(ARRAY_SIZE(gpio_list) == GPIO_COUNT);
+#include "gpio_list.h"
 
 /* Pins with alternate functions */
 const struct gpio_alt_func gpio_alt_funcs[] = {
diff --git a/board/it8380dev/board.h b/board/it8380dev/board.h
index dc1fe01187..04d3f1b4c0 100644
--- a/board/it8380dev/board.h
+++ b/board/it8380dev/board.h
@@ -13,35 +13,7 @@
 /* stubbed features */
 #undef CONFIG_LID_SWITCH
 
-enum gpio_signal {
-	GPIO_H_LED0,
-	GPIO_H_LED1,
-	GPIO_H_LED2,
-	GPIO_H_LED3,
-	GPIO_H_LED4,
-	GPIO_H_LED5,
-	GPIO_H_LED6,
-	GPIO_L_LED0,
-	GPIO_L_LED1,
-	GPIO_L_LED2,
-	GPIO_L_LED3,
-	GPIO_L_LED4,
-	GPIO_L_LED5,
-	GPIO_L_LED6,
-	GPIO_BUSY_LED,
-	GPIO_GOOD_LED,
-	GPIO_FAIL_LED,
-	GPIO_SW1,
-	GPIO_SW2,
-	GPIO_SW3,
-	GPIO_SW4,
-	GPIO_START_SW,
-	/* Unimplemented GPIOs */
-	GPIO_ENTERING_RW,
-
-	/* Number of GPIOs; not an actual GPIO */
-	GPIO_COUNT
-};
+#include "gpio_signal.h"
 
 #endif /* !__ASSEMBLER__ */
 #endif /* __BOARD_H */
diff --git a/board/it8380dev/gpio.inc b/board/it8380dev/gpio.inc
new file mode 100644
index 0000000000..dd8ffebde2
--- /dev/null
+++ b/board/it8380dev/gpio.inc
@@ -0,0 +1,32 @@
+/* -*- mode:c -*-
+ *
+ * Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+GPIO(H_LED0,   A, 0, GPIO_ODR_HIGH)
+GPIO(H_LED1,   A, 1, GPIO_ODR_HIGH)
+GPIO(H_LED2,   A, 2, GPIO_ODR_HIGH)
+GPIO(H_LED3,   A, 3, GPIO_ODR_HIGH)
+GPIO(H_LED4,   A, 4, GPIO_ODR_HIGH)
+GPIO(H_LED5,   A, 5, GPIO_ODR_HIGH)
+GPIO(H_LED6,   A, 6, GPIO_ODR_HIGH)
+GPIO(L_LED0,   I, 0, GPIO_ODR_HIGH)
+GPIO(L_LED1,   I, 1, GPIO_ODR_HIGH)
+GPIO(L_LED2,   I, 2, GPIO_ODR_HIGH)
+GPIO(L_LED3,   I, 3, GPIO_ODR_HIGH)
+GPIO(L_LED4,   I, 4, GPIO_ODR_HIGH)
+GPIO(L_LED5,   I, 5, GPIO_ODR_HIGH)
+GPIO(L_LED6,   I, 6, GPIO_ODR_HIGH)
+GPIO(BUSY_LED, J, 0, GPIO_OUT_LOW)
+GPIO(GOOD_LED, J, 1, GPIO_OUT_HIGH)
+GPIO(FAIL_LED, J, 2, GPIO_OUT_LOW)
+GPIO(SW1,      E, 0, GPIO_INPUT)
+GPIO(SW2,      E, 1, GPIO_INPUT | GPIO_PULL_DOWN)
+GPIO(SW3,      E, 2, GPIO_INPUT | GPIO_PULL_DOWN)
+GPIO(SW4,      E, 3, GPIO_INPUT | GPIO_PULL_DOWN)
+GPIO(START_SW, E, 4, GPIO_INT_FALLING, test_interrupt)
+
+/* Unimplemented signals which we need to emulate for now */
+UNIMPLEMENTED(ENTERING_RW)