Remove obsolete EC targets

This is needed to allow cleanup and refactoring of the EC codebase in
ToT.  All of these boards use firmware from branches and uploaded to
BCS, so they don't actually care that ToT can't build their firmware.

BUG=chromium:493866
TEST=build on the following using cbuildbot:
    daisy-paladin
    falco-paladin
    link-paladin
    nyan-paladin
    peppy-paladin
    samus-paladin
    squawks-paladin
    daisy_spring-paladin
CQ-DEPEND=CL:274121,CL:274127
BRANCH=none

Change-Id: I19598843755ded7b2385cc712ef463e5de4411b8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/274121
Reviewed-by: Bill Richardson <wfrichar@chromium.org>

7 files changed, 0 insertions, 316 deletions

diff --git a/board/jerry/Makefile b/board/jerry/Makefile
deleted file mode 120000
index 94aaae2c4d..0000000000
--- a/board/jerry/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-../../Makefile
\ No newline at end of file
diff --git a/board/jerry/battery.c b/board/jerry/battery.c
deleted file mode 100644
index 02b491443f..0000000000
--- a/board/jerry/battery.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery.h"
-#include "battery_smart.h"
-#include "console.h"
-#include "gpio.h"
-#include "host_command.h"
-#include "util.h"
-
-/* Shutdown mode parameter to write to manufacturer access register */
-#define SB_SHUTDOWN_DATA	0x0010
-
-static const struct battery_info info = {
-	.voltage_max    = 8400,		/* mV */
-	.voltage_normal = 7400,
-	.voltage_min    = 6000,
-	.precharge_current  = 256,	/* mA */
-	.start_charging_min_c = 0,
-	.start_charging_max_c = 45,
-	.charging_min_c       = 0,
-	.charging_max_c       = 45,
-	.discharging_min_c    = 0,
-	.discharging_max_c    = 60,
-};
-
-const struct battery_info *battery_get_info(void)
-{
-	return &info;
-}
-
-static int cutoff(void)
-{
-	int rv;
-
-	/* Ship mode command must be sent twice to take effect */
-	rv = sb_write(SB_MANUFACTURER_ACCESS, SB_SHUTDOWN_DATA);
-
-	if (rv != EC_SUCCESS)
-		return rv;
-
-	return sb_write(SB_MANUFACTURER_ACCESS, SB_SHUTDOWN_DATA);
-}
-
-
-int board_cut_off_battery(void)
-{
-	return cutoff();
-}
-
diff --git a/board/jerry/board.c b/board/jerry/board.c
deleted file mode 100644
index a91a25c6a4..0000000000
--- a/board/jerry/board.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* Veyron board-specific configuration */
-
-#include "battery.h"
-#include "chipset.h"
-#include "common.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "i2c.h"
-#include "keyboard_raw.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "power.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "registers.h"
-#include "spi.h"
-#include "task.h"
-#include "util.h"
-#include "timer.h"
-#include "charger.h"
-
-#define GPIO_KB_INPUT  (GPIO_INPUT | GPIO_PULL_UP | GPIO_INT_BOTH)
-#define GPIO_KB_OUTPUT GPIO_ODR_HIGH
-
-#include "gpio_list.h"
-
-
-/* power signal list.  Must match order of enum power_signal. */
-const struct power_signal_info power_signal_list[] = {
-	{GPIO_SOC_POWER_GOOD, 1, "POWER_GOOD"},
-	{GPIO_SUSPEND_L,      1, "SUSPEND#_ASSERTED"},
-};
-BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);
-
-/* I2C ports */
-const struct i2c_port_t i2c_ports[] = {
-	{"master", I2C_PORT_MASTER, 100},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	{STM32_TIM(2), STM32_TIM_CH(3),
-	 PWM_CONFIG_ACTIVE_LOW},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/**
- * Discharge battery when on AC power for factory test.
- */
-int board_discharge_on_ac(int enable)
-{
-	return charger_discharge_on_ac(enable);
-}
-
-void board_config_pre_init(void)
-{
-	/* enable SYSCFG clock */
-	STM32_RCC_APB2ENR |= 1 << 0;
-
-	/* Remap USART DMA to match the USART driver */
-	/*
-	 * the DMA mapping is :
-	 *  Chan 2 : TIM1_CH1
-	 *  Chan 3 : SPI1_TX
-	 *  Chan 4 : USART1_TX
-	 *  Chan 5 : USART1_RX
-	 */
-	STM32_SYSCFG_CFGR1 |= (1 << 9) | (1 << 10); /* Remap USART1 RX/TX DMA */
-}
diff --git a/board/jerry/board.h b/board/jerry/board.h
deleted file mode 100644
index 6ba79dbe1b..0000000000
--- a/board/jerry/board.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Veyron board configuration */
-
-#ifndef __BOARD_H
-#define __BOARD_H
-
-/* Optional features */
-#define CONFIG_AP_HANG_DETECT
-#define CONFIG_BATTERY_CUT_OFF
-#define CONFIG_BATTERY_SMART
-#define CONFIG_BOARD_PRE_INIT
-#define CONFIG_CHARGER
-#define CONFIG_CHARGER_BQ24715
-#define CONFIG_CHARGER_DISCHARGE_ON_AC
-#define CONFIG_CHARGER_V2
-#define CONFIG_CHIPSET_ROCKCHIP
-#define CONFIG_EXTPOWER_GPIO
-#define CONFIG_FORCE_CONSOLE_RESUME
-#define CONFIG_HOST_COMMAND_STATUS
-#define CONFIG_I2C
-#define CONFIG_KEYBOARD_COL2_INVERTED
-#define CONFIG_KEYBOARD_PROTOCOL_MKBP
-#define CONFIG_LED_COMMON
-#define CONFIG_LED_POLICY_STD
-#define CONFIG_LED_BAT_ACTIVE_LOW
-#define CONFIG_LED_POWER_ACTIVE_LOW
-#define CONFIG_LOW_POWER_IDLE
-#define CONFIG_LOW_POWER_S0
-#define CONFIG_POWER_BUTTON
-#define CONFIG_POWER_BUTTON_ACTIVE_STATE 1
-#define CONFIG_POWER_COMMON
-#define CONFIG_PWM
-#define CONFIG_SPI
-#define CONFIG_STM_HWTIMER32
-#define CONFIG_UART_RX_DMA
-#define CONFIG_VBOOT_HASH
-#undef CONFIG_WATCHDOG_HELP
-
-#define CONFIG_HIBERNATE_WAKEUP_PINS (STM32_PWR_CSR_EWUP1 | STM32_PWR_CSR_EWUP6)
-
-#ifndef __ASSEMBLER__
-
-/* 48 MHz SYSCLK clock frequency */
-#define CPU_CLOCK 48000000
-
-/* Keyboard output port list */
-#define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C
-
-/* Single I2C port, where the EC is the master. */
-#define I2C_PORT_MASTER 0
-#define I2C_PORT_BATTERY I2C_PORT_MASTER
-#define I2C_PORT_CHARGER I2C_PORT_MASTER
-
-/* Timer selection */
-#define TIM_CLOCK32  2
-#define TIM_WATCHDOG 4
-
-#include "gpio_signal.h"
-
-enum power_signal {
-	RK_POWER_GOOD = 0,
-	RK_SUSPEND_ASSERTED,
-	/* Number of power signals */
-	POWER_SIGNAL_COUNT
-};
-
-enum pwm_channel {
-	PWM_CH_POWER_LED = 0,
-	/* Number of PWM channels */
-	PWM_CH_COUNT
-};
-
-/* Charger module */
-#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* Input sensor resistor, mOhm */
-/* Input current limit for 45W AC adapter:
- * 45W/19V*85%=2013mA, choose the closest charger setting = 2048mA
- */
-#define CONFIG_CHARGER_INPUT_CURRENT 2048 /* mA, based on Link HW design */
-#define CONFIG_CHARGER_CURRENT_LIMIT 3000 /* PL102 inductor 3.0A(3.8A) */
-
-/* Discharge battery when on AC power for factory test. */
-int board_discharge_on_ac(int enable);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __BOARD_H */
diff --git a/board/jerry/build.mk b/board/jerry/build.mk
deleted file mode 100644
index e9b9999094..0000000000
--- a/board/jerry/build.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-# -*- makefile -*-
-# Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-
-# the IC is STmicro STM32F071RB
-CHIP:=stm32
-CHIP_FAMILY:=stm32f0
-CHIP_VARIANT:=stm32f07x
-
-board-y=board.o battery.o
diff --git a/board/jerry/ec.tasklist b/board/jerry/ec.tasklist
deleted file mode 100644
index 318cfe2553..0000000000
--- a/board/jerry/ec.tasklist
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/**
- * List of enabled tasks in the priority order
- *
- * The first one has the lowest priority.
- *
- * For each task, use the macro TASK(n, r, d, s) where :
- * 'n' in the name of the task
- * 'r' in the main routine of the task
- * 'd' in an opaque parameter passed to the routine at startup
- * 's' is the stack size in bytes; must be a multiple of 8
- */
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE)
diff --git a/board/jerry/gpio.inc b/board/jerry/gpio.inc
deleted file mode 100644
index f334dfcf83..0000000000
--- a/board/jerry/gpio.inc
+++ /dev/null
@@ -1,59 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Inputs with interrupt handlers are first for efficiency */
-GPIO_INT(POWER_BUTTON_L, PIN(B, 5),  GPIO_INT_BOTH,                power_button_interrupt) /* wk6 */ /* active high, the name is for compatibility with existing code */
-GPIO_INT(SOC_POWER_GOOD, PIN(A, 3),  GPIO_INT_BOTH,                power_signal_interrupt)
-GPIO_INT(LID_OPEN,       PIN(C, 13), GPIO_INT_BOTH,                lid_interrupt)
-GPIO_INT(SUSPEND_L,      PIN(C, 7),  GPIO_INT_BOTH,                power_signal_interrupt)
-GPIO_INT(SPI1_NSS,       PIN(A, 4),  GPIO_INT_BOTH,                spi_event)
-GPIO_INT(AC_PRESENT,     PIN(C, 6),  GPIO_INT_BOTH | GPIO_PULL_UP, extpower_interrupt)
-
-/* Keyboard inputs */
-GPIO_INT(KB_IN00, PIN(C, 8),  GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-GPIO_INT(KB_IN01, PIN(C, 9),  GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-GPIO_INT(KB_IN02, PIN(C, 10), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-GPIO_INT(KB_IN03, PIN(C, 11), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-GPIO_INT(KB_IN04, PIN(C, 12), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-GPIO_INT(KB_IN05, PIN(C, 14), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-GPIO_INT(KB_IN06, PIN(C, 15), GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-GPIO_INT(KB_IN07, PIN(D, 2),  GPIO_KB_INPUT, keyboard_raw_gpio_interrupt)
-
-/* Other inputs */
-GPIO(EC_WAKE, PIN(A, 0), GPIO_INPUT | GPIO_PULL_DOWN) /* wk1 */
-GPIO(WP_L,    PIN(B, 4), GPIO_INPUT)
-
-/* Outputs */
-GPIO(BAT_LED_RED,       PIN(B, 11), GPIO_OUT_HIGH)
-GPIO(BAT_LED_GREEN,     PIN(A, 11), GPIO_OUT_HIGH)
-GPIO(EC_BL_OVERRIDE,    PIN(F, 1),  GPIO_OUT_LOW)
-GPIO(EC_INT,            PIN(B, 9),  GPIO_OUT_LOW)
-GPIO(ENTERING_RW,       PIN(F, 0),  GPIO_OUT_LOW)
-GPIO(I2C1_SCL,          PIN(B, 6),  GPIO_ODR_HIGH)
-GPIO(I2C1_SDA,          PIN(B, 7),  GPIO_ODR_HIGH)
-GPIO(KB_OUT00,          PIN(B, 0),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT01,          PIN(B, 8),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT02,          PIN(B, 12), GPIO_OUT_LOW) /* Inverted from silegro */
-GPIO(KB_OUT03,          PIN(B, 13), GPIO_KB_OUTPUT)
-GPIO(KB_OUT04,          PIN(B, 14), GPIO_KB_OUTPUT)
-GPIO(KB_OUT05,          PIN(B, 15), GPIO_KB_OUTPUT)
-GPIO(KB_OUT06,          PIN(C, 0),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT07,          PIN(C, 1),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT08,          PIN(C, 2),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT09,          PIN(B, 1),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT10,          PIN(C, 5),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT11,          PIN(C, 4),  GPIO_KB_OUTPUT)
-GPIO(KB_OUT12,          PIN(A, 13), GPIO_KB_OUTPUT)
-GPIO(POWER_LED,         PIN(A, 2),  GPIO_OUT_HIGH)
-GPIO(PMIC_PWRON,        PIN(A, 12), GPIO_OUT_LOW)
-GPIO(PMIC_RESET,        PIN(B, 3),  GPIO_OUT_LOW)
-GPIO(PMIC_SOURCE_PWREN, PIN(B, 10), GPIO_OUT_LOW)
-GPIO(PMIC_WARM_RESET_L, PIN(C, 3),  GPIO_ODR_HIGH)
-
-ALTERNATE(PIN_MASK(A, 0x00f0), 0, MODULE_SPI,  0)
-ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, 0)
-ALTERNATE(PIN_MASK(B, 0x00c0), 1, MODULE_I2C,  0)