kukui: code cleanup

Remove unused clode blocks and includes.

BUG=None
TEST=make
BRANCH=master

Change-Id: I66994039e4c215ce652cdef227207a6bbd94b316
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1692364
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Commit-Queue: Ting Shen <phoenixshen@chromium.org>
Tested-by: Ting Shen <phoenixshen@chromium.org>

3 files changed, 4 insertions, 39 deletions

diff --git a/board/kukui/battery.c b/board/kukui/battery.c
index 8cf9299f41..62f73bfa34 100644
--- a/board/kukui/battery.c
+++ b/board/kukui/battery.c
@@ -262,9 +262,6 @@ DECLARE_HOOK(HOOK_BATTERY_SOC_CHANGE,
 	     board_charge_termination,
 	     HOOK_PRIO_DEFAULT);
 
-/* Customs options controllable by host command. */
-#define PARAM_FASTCHARGE (CS_PARAM_CUSTOM_PROFILE_MIN + 0)
-
 enum ec_status charger_profile_override_get_param(uint32_t param,
 						  uint32_t *value)
 {
diff --git a/board/kukui/board.c b/board/kukui/board.c
index 322e5a2707..5b44578362 100644
--- a/board/kukui/board.c
+++ b/board/kukui/board.c
@@ -21,7 +21,6 @@
 #include "driver/charger/rt946x.h"
 #include "driver/sync.h"
 #include "driver/tcpm/mt6370.h"
-#include "driver/temp_sensor/tmp432.h"
 #include "ec_commands.h"
 #include "extpower.h"
 #include "gpio.h"
@@ -35,13 +34,9 @@
 #include "pwm_chip.h"
 #include "registers.h"
 #include "spi.h"
-#include "switch.h"
 #include "system.h"
 #include "task.h"
 #include "tcpm.h"
-#include "temp_sensor.h"
-#include "temp_sensor_chip.h"
-#include "thermal.h"
 #include "timer.h"
 #include "usb_charge.h"
 #include "usb_mux.h"
@@ -94,30 +89,6 @@ const struct power_signal_info power_signal_list[] = {
 };
 BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);
 
-#ifdef CONFIG_TEMP_SENSOR_TMP432
-/* Temperature sensors data; must be in same order as enum temp_sensor_id. */
-const struct temp_sensor_t temp_sensors[] = {
-	{"TMP432_Internal", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val,
-		TMP432_IDX_LOCAL, 4},
-	{"TMP432_Sensor_1", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val,
-		TMP432_IDX_REMOTE1, 4},
-	{"TMP432_Sensor_2", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val,
-		TMP432_IDX_REMOTE2, 4},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/*
- * Thermal limits for each temp sensor. All temps are in degrees K. Must be in
- * same order as enum temp_sensor_id. To always ignore any temp, use 0.
- */
-struct ec_thermal_config thermal_params[] = {
-	{{0, 0, 0}, 0, 0}, /* TMP432_Internal */
-	{{0, 0, 0}, 0, 0}, /* TMP432_Sensor_1 */
-	{{0, 0, 0}, 0, 0}, /* TMP432_Sensor_2 */
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
-#endif
-
 /******************************************************************************/
 /* SPI devices */
 const struct spi_device_t spi_devices[] = {
@@ -314,15 +285,14 @@ DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
 static void board_rev_init(void)
 {
 	/* Board revision specific configs. */
-#ifdef BOARD_KUKUI
+
 	/*
 	 * It's a P1 pin BOOTBLOCK_MUX_OE, also a P2 pin BC12_DET_EN.
 	 * Keep this pin defaults to P1 setting since that eMMC enabled with
 	 * High-Z stat.
 	 */
-	if (board_get_version() == 1)
+	if (IS_ENABLED(BOARD_KUKUI) && board_get_version() == 1)
 		gpio_set_flags(GPIO_BC12_DET_EN, GPIO_ODR_HIGH);
-#endif
 
 	if (board_get_version() >= 2) {
 		/*
diff --git a/board/kukui/usb_pd_policy.c b/board/kukui/usb_pd_policy.c
index b61664043e..551fa18e1f 100644
--- a/board/kukui/usb_pd_policy.c
+++ b/board/kukui/usb_pd_policy.c
@@ -3,7 +3,6 @@
  * found in the LICENSE file.
  */
 
-#include "atomic.h"
 #include "charger.h"
 #include "charge_manager.h"
 #include "common.h"
@@ -55,11 +54,10 @@ void pd_transition_voltage(int idx)
 
 static int board_get_polarity(int port)
 {
-#ifdef BOARD_KRANE
 	/* Krane's aux mux polarity is reversed. Workaround to flip it back. */
-	if (board_get_version() == 3)
+	if (IS_ENABLED(BOARD_KRANE) && board_get_version() == 3)
 		return !pd_get_polarity(port);
-#endif
+
 	return pd_get_polarity(port);
 }