ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

14 files changed, 0 insertions, 1779 deletions

diff --git a/board/lazor/battery.c b/board/lazor/battery.c
deleted file mode 100644
index 6cad716e2c..0000000000
--- a/board/lazor/battery.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all lazor battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-
-const struct board_batt_params board_battery_info[] = {
-	/* AP16L5J */
-	[BATTERY_AP16L5J] = {
-		.fuel_gauge = {
-			.manuf_name = "PANASONIC",
-			.device_name = "AP16L5J",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.mfgacc_support = 0,
-				.reg_addr = 0x0,
-				.reg_mask = 0x4000,
-				.disconnect_val = 0x0,
-			}
-		},
-		.batt_info = {
-			.voltage_max            = 8800,
-			.voltage_normal         = 7700, /* mV */
-			.voltage_min            = 6000, /* mV */
-			.precharge_current      = 256,  /* mA */
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 50,
-			.charging_min_c         = 0,
-			.charging_max_c         = 60,
-			.discharging_min_c      = -20,
-			.discharging_max_c      = 75,
-		},
-	},
-	/* AP16L5J with PN version */
-	[BATTERY_AP16L5J_009] = {
-		.fuel_gauge = {
-			.manuf_name = "PANASONIC KT00205009",
-			.device_name = "AP16L5J",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.mfgacc_support = 0,
-				.reg_addr = 0x0,
-				.reg_mask = 0x4000,
-				.disconnect_val = 0x0,
-			}
-		},
-		.batt_info = {
-			.voltage_max            = 8800,
-			.voltage_normal         = 7700, /* mV */
-			.voltage_min            = 6000, /* mV */
-			.precharge_current      = 256,  /* mA */
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 50,
-			.charging_min_c         = 0,
-			.charging_max_c         = 60,
-			.discharging_min_c      = -20,
-			.discharging_max_c      = 75,
-		},
-	},
-	/* AP16L8J */
-	[BATTERY_AP16L8J] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC KT0020G010",
-			.device_name = "AP16L8J",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.mfgacc_support = 1,
-				.reg_addr = 0x0,
-				.reg_mask = 0x0002,
-				.disconnect_val = 0x0,
-			}
-		},
-		.batt_info = {
-			.voltage_max            = 8700,
-			.voltage_normal         = 7500, /* mV */
-			.voltage_min            = 6000, /* mV */
-			.precharge_current      = 256,  /* mA */
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 50,
-			.charging_min_c         = 0,
-			.charging_max_c         = 60,
-			.discharging_min_c      = -20,
-			.discharging_max_c      = 75,
-		},
-	},
-	/* LGC AP18C8K Battery Information */
-	 [BATTERY_LGC_AP18C8K] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC KT0030G020",
-			.device_name = "AP18C8K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x43,
-				.reg_mask = 0x0001,
-				.disconnect_val = 0x0,
-			},
-		},
-		.batt_info = {
-			.voltage_max            = 13050,
-			.voltage_normal         = 11250,
-			.voltage_min            = 9000,
-			.precharge_current      = 256,
-			.start_charging_min_c   = 0,
-			.start_charging_max_c   = 50,
-			.charging_min_c         = 0,
-			.charging_max_c         = 60,
-			.discharging_min_c      = -20,
-			.discharging_max_c      = 75,
-		},
-	},
-	/* Murata AP18C4K Battery Information */
-	[BATTERY_MURATA_AP18C4K] = {
-		.fuel_gauge = {
-			.manuf_name = "Murata KT00304012",
-			.device_name = "AP18C4K",
-			.ship_mode = {
-				.reg_addr = 0x3A,
-				.reg_data = { 0xC574, 0xC574 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x2000,
-				.disconnect_val = 0x2000,
-			},
-		},
-		.batt_info = {
-			.voltage_max		= 13200,
-			.voltage_normal		= 11400,
-			.voltage_min		= 9000,
-			.precharge_current	= 256,
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 75,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_AP16L5J;
diff --git a/board/lazor/board.c b/board/lazor/board.c
deleted file mode 100644
index 1118f3a845..0000000000
--- a/board/lazor/board.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lazor board-specific configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "extpower.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/accelgyro_icm_common.h"
-#include "driver/accelgyro_icm426xx.h"
-#include "driver/accel_kionix.h"
-#include "driver/accel_kx022.h"
-#include "driver/ln9310.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "system.h"
-#include "shi_chip.h"
-#include "sku.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "usbc_config.h"
-#include "usbc_ppc.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#include "gpio_list.h"
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	/* Use 80 us, because KSO_02 passes through the H1. */
-	.output_settle_us = 80,
-	/*
-	 * Unmask 0x08 in [0] (KSO_00/KSI_03, the new location of Search key);
-	 * as it still uses the legacy location (KSO_01/KSI_00).
-	 */
-	.actual_key_mask = {
-		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca
-	},
-	/* Other values should be the same as the default configuration. */
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-};
-
-/*
- * We have total 30 pins for keyboard connecter {-1, -1} mean
- * the N/A pin that don't consider it and reserve index 0 area
- * that we don't have pin 0.
- */
-const int keyboard_factory_scan_pins[][2] = {
-	{-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6},
-	{0, 7}, {-1, -1}, {-1, -1}, {1, 4}, {1, 3},
-	{-1, -1}, {1, 6}, {1, 7}, {3, 1}, {2, 0},
-	{1, 5}, {2, 6}, {2, 7}, {2, 1}, {2, 4},
-	{2, 5}, {1, 2}, {2, 3}, {2, 2}, {3, 0},
-	{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1},
-	{-1, -1},
-};
-
-const int keyboard_factory_scan_pins_used =
-		ARRAY_SIZE(keyboard_factory_scan_pins);
-
-/* I2C port map */
-const struct i2c_port_t i2c_ports[] = {
-	{"power",   I2C_PORT_POWER,  100, GPIO_EC_I2C_POWER_SCL,
-					  GPIO_EC_I2C_POWER_SDA},
-	{"tcpc0",   I2C_PORT_TCPC0, 1000, GPIO_EC_I2C_USB_C0_PD_SCL,
-					  GPIO_EC_I2C_USB_C0_PD_SDA},
-	{"tcpc1",   I2C_PORT_TCPC1, 1000, GPIO_EC_I2C_USB_C1_PD_SCL,
-					  GPIO_EC_I2C_USB_C1_PD_SDA},
-	{"eeprom",  I2C_PORT_EEPROM, 400, GPIO_EC_I2C_EEPROM_SCL,
-					  GPIO_EC_I2C_EEPROM_SDA},
-	{"sensor",  I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL,
-					  GPIO_EC_I2C_SENSOR_SDA},
-};
-
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	/* Measure VBUS through a 1/10 voltage divider */
-	[ADC_VBUS] = {
-		"VBUS",
-		NPCX_ADC_CH1,
-		ADC_MAX_VOLT * 10,
-		ADC_READ_MAX + 1,
-		0
-	},
-	/*
-	 * Adapter current output or battery charging/discharging current (uV)
-	 * 18x amplification on charger side.
-	 */
-	[ADC_AMON_BMON] = {
-		"AMON_BMON",
-		NPCX_ADC_CH2,
-		ADC_MAX_VOLT * 1000 / 18,
-		ADC_READ_MAX + 1,
-		0
-	},
-	/*
-	 * ISL9238 PSYS output is 1.44 uA/W over 5.6K resistor, to read
-	 * 0.8V @ 99 W, i.e. 124000 uW/mV. Using ADC_MAX_VOLT*124000 and
-	 * ADC_READ_MAX+1 as multiplier/divider leads to overflows, so we
-	 * only divide by 2 (enough to avoid precision issues).
-	 */
-	[ADC_PSYS] = {
-		"PSYS",
-		NPCX_ADC_CH3,
-		ADC_MAX_VOLT * 124000 * 2 / (ADC_READ_MAX + 1),
-		2,
-		0
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 },
-	/* TODO(waihong): Assign a proper frequency. */
-	[PWM_CH_DISPLIGHT] = { .channel = 5, .flags = 0, .freq = 4800 },
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/* Mutexes */
-static struct mutex g_base_mutex;
-static struct mutex g_lid_mutex;
-
-static struct kionix_accel_data g_kx022_data;
-static struct bmi_drv_data_t g_bmi160_data;
-static struct icm_drv_data_t g_icm426xx_data;
-static struct accelgyro_saved_data_t g_bma255_data;
-
-enum base_accelgyro_type {
-	BASE_GYRO_NONE = 0,
-	BASE_GYRO_BMI160 = 1,
-	BASE_GYRO_ICM426XX = 2,
-};
-
-/* Matrix to rotate accelerometer into standard reference frame */
-const mat33_fp_t base_standard_ref_bmi160 = {
-	{ FLOAT_TO_FP(1), 0,  0},
-	{ 0,  FLOAT_TO_FP(-1),  0},
-	{ 0,  0, FLOAT_TO_FP(-1)}
-};
-
-const mat33_fp_t base_standard_ref_icm426xx = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0,  0, FLOAT_TO_FP(-1)}
-};
-
-static const mat33_fp_t lid_standard_ref_bma255 = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-static const mat33_fp_t lid_standard_ref_kx022 = {
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-	 .name = "Lid Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	 .chip = MOTIONSENSE_CHIP_BMA255,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &bma2x2_accel_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_bma255_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-	 .rot_standard_ref = &lid_standard_ref_bma255,
-	 .default_range = 2, /* g, to support lid angle calculation. */
-	 .min_frequency = BMA255_ACCEL_MIN_FREQ,
-	 .max_frequency = BMA255_ACCEL_MAX_FREQ,
-	 .config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		/* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	 },
-	},
-	/*
-	 * Note: bmi160: supports accelerometer and gyro sensor
-	 * Requirement: accelerometer sensor must init before gyro sensor
-	 * DO NOT change the order of the following table.
-	 */
-	[BASE_ACCEL] = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .rot_standard_ref = &base_standard_ref_bmi160,
-	 .default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
-	 .min_frequency = BMI_ACCEL_MIN_FREQ,
-	 .max_frequency = BMI_ACCEL_MAX_FREQ,
-	 .config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		/* Sensor on for lid angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	 },
-	},
-	[BASE_GYRO] = {
-	 .name = "Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .port = I2C_PORT_SENSOR,
-	 .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = &base_standard_ref_bmi160,
-	 .min_frequency = BMI_GYRO_MIN_FREQ,
-	 .max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-struct motion_sensor_t kx022_lid_accel = {
-	.name = "Lid Accel",
-	.active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	.chip = MOTIONSENSE_CHIP_KX022,
-	.type = MOTIONSENSE_TYPE_ACCEL,
-	.location = MOTIONSENSE_LOC_LID,
-	.drv = &kionix_accel_drv,
-	.mutex = &g_lid_mutex,
-	.drv_data = &g_kx022_data,
-	.port = I2C_PORT_SENSOR,
-	.i2c_spi_addr_flags = KX022_ADDR0_FLAGS,
-	.rot_standard_ref = &lid_standard_ref_kx022,
-	.default_range = 2, /* g, enough for laptop. */
-	.min_frequency = KX022_ACCEL_MIN_FREQ,
-	.max_frequency = KX022_ACCEL_MAX_FREQ,
-	.config = {
-		 /* EC use accel for angle detection */
-		 [SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		 },
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	},
-};
-
-struct motion_sensor_t icm426xx_base_accel = {
-	.name = "Base Accel",
-	.active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	.chip = MOTIONSENSE_CHIP_ICM426XX,
-	.type = MOTIONSENSE_TYPE_ACCEL,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &icm426xx_drv,
-	.mutex = &g_base_mutex,
-	.drv_data = &g_icm426xx_data,
-	.port = I2C_PORT_SENSOR,
-	.i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
-	.default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/
-	.rot_standard_ref = &base_standard_ref_icm426xx,
-	.min_frequency = ICM426XX_ACCEL_MIN_FREQ,
-	.max_frequency = ICM426XX_ACCEL_MAX_FREQ,
-	.config = {
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-		},
-	},
-};
-
-struct motion_sensor_t icm426xx_base_gyro = {
-	.name = "Base Gyro",
-	.active_mask = SENSOR_ACTIVE_S0_S3_S5,
-	.chip = MOTIONSENSE_CHIP_ICM426XX,
-	.type = MOTIONSENSE_TYPE_GYRO,
-	.location = MOTIONSENSE_LOC_BASE,
-	.drv = &icm426xx_drv,
-	.mutex = &g_base_mutex,
-	.drv_data = &g_icm426xx_data,
-	.port = I2C_PORT_SENSOR,
-	.i2c_spi_addr_flags = ICM426XX_ADDR0_FLAGS,
-	.default_range = 1000, /* dps */
-	.rot_standard_ref = &base_standard_ref_icm426xx,
-	.min_frequency = ICM426XX_GYRO_MIN_FREQ,
-	.max_frequency = ICM426XX_GYRO_MAX_FREQ,
-};
-
-static int base_accelgyro_config;
-
-void motion_interrupt(enum gpio_signal signal)
-{
-	switch (base_accelgyro_config) {
-	case BASE_GYRO_ICM426XX:
-		icm426xx_interrupt(signal);
-		break;
-	case BASE_GYRO_BMI160:
-	default:
-		bmi160_interrupt(signal);
-		break;
-	}
-}
-
-static void board_detect_motionsensor(void)
-{
-	int ret;
-	int val;
-
-	/* Check lid accel chip */
-	ret = i2c_read8(I2C_PORT_SENSOR, BMA2x2_I2C_ADDR1_FLAGS,
-		BMA2x2_CHIP_ID_ADDR, &val);
-	if (ret)
-		motion_sensors[LID_ACCEL] = kx022_lid_accel;
-
-	CPRINTS("Lid Accel: %s", ret ? "KX022" : "BMA255");
-
-	/* Check base accelgyro chip */
-	ret = icm_read8(&icm426xx_base_accel, ICM426XX_REG_WHO_AM_I, &val);
-	if (val == ICM426XX_CHIP_ICM40608) {
-		motion_sensors[BASE_ACCEL] = icm426xx_base_accel;
-		motion_sensors[BASE_GYRO] = icm426xx_base_gyro;
-	}
-
-	base_accelgyro_config = (val == ICM426XX_CHIP_ICM40608)
-		 ? BASE_GYRO_ICM426XX : BASE_GYRO_BMI160;
-	CPRINTS("Base Accelgyro: %s", (val == ICM426XX_CHIP_ICM40608)
-		 ? "ICM40608" : "BMI160");
-}
-
-static void board_update_sensor_config_from_sku(void)
-{
-	if (board_is_clamshell()) {
-		motion_sensor_count = 0;
-		gmr_tablet_switch_disable();
-		/* The sensors are not stuffed; don't allow lines to float */
-		gpio_set_flags(GPIO_ACCEL_GYRO_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-		gpio_set_flags(GPIO_LID_ACCEL_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-	} else {
-		board_detect_motionsensor();
-		motion_sensor_count = ARRAY_SIZE(motion_sensors);
-		/* Enable interrupt for the base accel sensor */
-		gpio_enable_interrupt(GPIO_ACCEL_GYRO_INT_L);
-	}
-}
-DECLARE_HOOK(HOOK_INIT, board_update_sensor_config_from_sku,
-	     HOOK_PRIO_INIT_I2C + 2);
-
-/* Initialize board. */
-static void board_init(void)
-{
-	/* Set the backlight duty cycle to 0. AP will override it later. */
-	pwm_set_duty(PWM_CH_DISPLIGHT, 0);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S0 -> S3 transition */
-static void board_chipset_suspend(void)
-{
-	/*
-	 * Turn off display backlight in S3. AP has its own control. The EC's
-	 * and the AP's will be AND'ed together in hardware.
-	 */
-	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 0);
-	pwm_enable(PWM_CH_DISPLIGHT, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S3 -> S0 transition */
-static void board_chipset_resume(void)
-{
-	/* Turn on display and keyboard backlight in S0. */
-	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 1);
-	if (pwm_get_duty(PWM_CH_DISPLIGHT))
-		pwm_enable(PWM_CH_DISPLIGHT, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);
-
-__override uint32_t board_get_sku_id(void)
-{
-	static int sku_id = -1;
-
-	if (sku_id == -1) {
-		int bits[3];
-
-		bits[0] = gpio_get_ternary(GPIO_SKU_ID0);
-		bits[1] = gpio_get_ternary(GPIO_SKU_ID1);
-		bits[2] = gpio_get_ternary(GPIO_SKU_ID2);
-		sku_id = binary_first_base3_from_bits(bits, ARRAY_SIZE(bits));
-	}
-
-	return (uint32_t)sku_id;
-}
diff --git a/board/lazor/board.h b/board/lazor/board.h
deleted file mode 100644
index d045c13cb5..0000000000
--- a/board/lazor/board.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lazor board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#include "baseboard.h"
-
-/* Internal SPI flash on NPCX7 */
-#define CONFIG_FLASH_SIZE_BYTES (512 * 1024)  /* 512KB internal spi flash */
-
-/* Switchcap */
-#define CONFIG_LN9310
-
-/* Keyboard */
-#define CONFIG_KEYBOARD_PROTOCOL_MKBP
-
-#define CONFIG_PWM_KBLIGHT
-
-/* Battery */
-#define CONFIG_BATTERY_DEVICE_CHEMISTRY  "LION"
-#define CONFIG_BATTERY_REVIVE_DISCONNECT
-#define CONFIG_BATTERY_FUEL_GAUGE
-
-/* BC 1.2 Charger */
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/* USB */
-#define CONFIG_USB_PD_TCPM_MULTI_PS8XXX
-#define CONFIG_USB_PD_TCPM_PS8751
-#define CONFIG_USB_PD_TCPM_PS8805
-#define CONFIG_USB_PD_TCPM_PS8805_FORCE_DID
-#define CONFIG_USBC_PPC_SN5S330
-#define CONFIG_USB_PD_PORT_MAX_COUNT 2
-
-/* USB-A */
-#define USB_PORT_COUNT 1
-#define CONFIG_USB_PORT_POWER_DUMB
-
-/* Sensors */
-#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
-
-/* BMI160 Base accel/gyro */
-#define CONFIG_ACCELGYRO_BMI160
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define OPT3001_I2C_ADDR_FLAGS OPT3001_I2C_ADDR1_FLAGS
-
-/* ICM426XX Base accel/gyro */
-#define CONFIG_ACCELGYRO_ICM426XX
-#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-/* KX022 lid accel */
-#define CONFIG_ACCEL_KX022
-
-/* BMA253 lid accel */
-#define CONFIG_ACCEL_BMA255
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-#define CONFIG_LID_ANGLE_UPDATE
-
-#define CONFIG_TABLET_MODE
-#define CONFIG_TABLET_MODE_SWITCH
-#define CONFIG_GMR_TABLET_MODE
-#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L
-
-/* GPIO alias */
-#define GPIO_AC_PRESENT GPIO_ACOK_OD
-#define GPIO_WP_L GPIO_EC_WP_ODL
-#define GPIO_PMIC_RESIN_L GPIO_PM845_RESIN_L
-#define GPIO_SWITCHCAP_PG_INT_L GPIO_DA9313_GPIO0
-#define GPIO_SWITCHCAP_ON_L GPIO_SWITCHCAP_ON
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-#include "sku.h"
-
-enum adc_channel {
-	ADC_VBUS,
-	ADC_AMON_BMON,
-	ADC_PSYS,
-	ADC_CH_COUNT
-};
-
-/* Motion sensors */
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT = 0,
-	PWM_CH_DISPLIGHT,
-	PWM_CH_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
-	BATTERY_AP16L5J,
-	BATTERY_AP16L5J_009,
-	BATTERY_AP16L8J,
-	BATTERY_LGC_AP18C8K,
-	BATTERY_MURATA_AP18C4K,
-	BATTERY_TYPE_COUNT,
-};
-
-/* support factory keyboard test */
-#define CONFIG_KEYBOARD_FACTORY_TEST
-
-/* Reset all TCPCs. */
-void board_reset_pd_mcu(void);
-void board_set_tcpc_power_mode(int port, int mode);
-/* Motion sensor interrupt */
-void motion_interrupt(enum gpio_signal signal);
-
-#endif /* !defined(__ASSEMBLER__) */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/lazor/build.mk b/board/lazor/build.mk
deleted file mode 100644
index 8cf8679e35..0000000000
--- a/board/lazor/build.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-# -*- makefile -*-
-# Copyright 2020 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m6fc
-BASEBOARD:=trogdor
-
-board-y+=battery.o
-board-y+=board.o
-board-y+=hibernate.o
-board-y+=led.o
-board-y+=sku.o
-board-y+=switchcap.o
-board-y+=usbc_config.o
diff --git a/board/lazor/ec.tasklist b/board/lazor/ec.tasklist
deleted file mode 100644
index 2b55c26c20..0000000000
--- a/board/lazor/ec.tasklist
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, ULTRA_TASK_STACK_SIZE)
diff --git a/board/lazor/gpio.inc b/board/lazor/gpio.inc
deleted file mode 100644
index b5c15b3729..0000000000
--- a/board/lazor/gpio.inc
+++ /dev/null
@@ -1,188 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* USB interrupts */
-GPIO_INT(USB_C0_PD_INT_ODL,    PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event)  /* Interrupt from port-0 TCPC */
-GPIO_INT(USB_C1_PD_INT_ODL,    PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event)  /* Interrupt from port-1 TCPC */
-GPIO_INT(USB_C0_SWCTL_INT_ODL, PIN(0, 3), GPIO_INT_FALLING, ppc_interrupt)  /* Interrupt from port-0 PPC */
-GPIO_INT(USB_C1_SWCTL_INT_ODL, PIN(4, 0), GPIO_INT_FALLING, ppc_interrupt)  /* Interrupt from port-1 PPC */
-GPIO_INT(USB_C0_BC12_INT_L,    PIN(6, 1), GPIO_INT_FALLING | GPIO_PULL_UP, usb0_evt)  /* Interrupt from port-0 BC1.2 */
-GPIO_INT(USB_C1_BC12_INT_L,    PIN(8, 2), GPIO_INT_FALLING | GPIO_PULL_UP, usb1_evt)  /* Interrupt from port-1 BC1.2 */
-GPIO_INT(USB_A0_OC_ODL,        PIN(D, 1), GPIO_INT_BOTH | GPIO_PULL_UP, usba_oc_interrupt)
-
-/* System interrupts */
-GPIO_INT(ACOK_OD,           PIN(0, 0), GPIO_INT_BOTH, extpower_interrupt)  /* ACOK */
-GPIO_INT(CCD_MODE_ODL,      PIN(E, 3), GPIO_INT_FALLING, board_connect_c0_sbu)  /* Case Closed Debug Mode */
-GPIO_INT(EC_PWR_BTN_ODL,    PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)  /* Power button */
-GPIO_INT(EC_VOLDN_BTN_ODL,  PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)  /* Volume Up button */
-GPIO_INT(EC_VOLUP_BTN_ODL,  PIN(F, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)  /* Volume Down button */
-GPIO_INT(EC_WP_ODL,         PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)  /* Write protection */
-GPIO_INT(LID_OPEN_EC,       PIN(D, 2), GPIO_INT_BOTH, lid_interrupt)  /* Lid open */
-GPIO_INT(AP_RST_L,          PIN(C, 1), GPIO_INT_BOTH | GPIO_SEL_1P8V, chipset_ap_rst_interrupt)  /* PMIC to signal AP reset */
-GPIO_INT(PS_HOLD,           PIN(A, 4), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt)  /* Indicate when AP triggers reset/shutdown */
-GPIO_INT(AP_SUSPEND,        PIN(5, 7), GPIO_INT_BOTH, power_signal_interrupt)  /* Suspend signal from PMIC */
-GPIO_INT(DEPRECATED_AP_RST_REQ, PIN(C, 2), GPIO_INT_BOTH | GPIO_PULL_DOWN | GPIO_SEL_1P8V, power_signal_interrupt) /* Deprecated AP initiated reset indicator */
-/*
- * When switch-cap is off, the POWER_GOOD signal is floating. Need a pull-down
- * to make it low. Overload the interrupt function chipset_warm_reset_interrupt
- * for not only signalling power_signal_interrupt but also handling the logic
- * of WARM_RESET_L which is pulled-up by the same rail of POWER_GOOD.
- */
-GPIO_INT(POWER_GOOD,        PIN(5, 4), GPIO_INT_BOTH | GPIO_PULL_DOWN, chipset_power_good_interrupt)  /* SRC_PP1800_S10A from PMIC */
-GPIO_INT(WARM_RESET_L,      PIN(F, 4), GPIO_INT_BOTH | GPIO_SEL_1P8V, chipset_warm_reset_interrupt)  /* AP warm reset */
-GPIO_INT(AP_EC_SPI_CS_L,    PIN(5, 3), GPIO_INT_FALLING | GPIO_PULL_DOWN, shi_cs_event)  /* EC SPI Chip Select */
-
-/* Sensor interrupts */
-GPIO_INT(TABLET_MODE_L,     PIN(C, 6), GPIO_INT_BOTH, gmr_tablet_switch_isr)
-GPIO_INT(ACCEL_GYRO_INT_L,  PIN(A, 0), GPIO_INT_FALLING, motion_interrupt)  /* Accelerometer/gyro interrupt */
-
-/* Switchcap
- *
- * For DA9313 SKUs, it is GPIO0 of DA9313. The GPIO0 is configured as PVC_PG.
- * For LN9310 SKUs, it is the interrupt line of LN9310.
- */
-GPIO_INT(DA9313_GPIO0,      PIN(E, 2), GPIO_INT_FALLING, ln9310_interrupt)
-
-/*
- * EC_RST_ODL used to be a wake source from PSL mode. However, we disabled
- * the PSL mode. This GPIO does nothing now. Simply set it an INPUT.
- */
-GPIO(EC_RST_ODL,            PIN(0, 2), GPIO_INPUT)     /* EC reset */
-GPIO(EC_ENTERING_RW,        PIN(E, 1), GPIO_OUT_LOW)   /* Indicate when EC is entering RW code */
-GPIO(EC_BATT_PRES_ODL,      PIN(E, 5), GPIO_INPUT)     /* Battery Present */
-
-/* PMIC/AP 1.8V */
-GPIO(PM845_RESIN_L,         PIN(3, 2), GPIO_ODR_HIGH)  /* PMIC reset trigger */
-GPIO(PMIC_KPD_PWR_ODL,      PIN(D, 6), GPIO_ODR_HIGH)  /* PMIC power button */
-GPIO(EC_INT_L,              PIN(A, 2), GPIO_ODR_HIGH)  /* Interrupt line between AP and EC */
-GPIO(QSIP_ON,               PIN(5, 0), GPIO_OUT_LOW)   /* Not used, for non-switchcap testing */
-
-/* Power enables */
-GPIO(HIBERNATE_L,           PIN(5, 2), GPIO_ODR_HIGH)  /* EC hibernate */
-GPIO(SWITCHCAP_ON,          PIN(D, 5), GPIO_OUT_LOW)   /* Enable switch cap; will be configured in the board init */
-/* TODO(waihong): Remove it. The VBOB switch is for backup. */
-GPIO(VBOB_EN,               PIN(D, 3), GPIO_OUT_LOW)   /* Enable VBOB */
-GPIO(EN_PP3300_A,           PIN(A, 6), GPIO_OUT_LOW)   /* Enable PP3300 */
-GPIO(EN_PP5000_A,           PIN(6, 7), GPIO_OUT_LOW)   /* Enable PP5000 */
-GPIO(EC_BL_DISABLE_L,       PIN(B, 6), GPIO_OUT_LOW)   /* Backlight disable signal from EC */
-
-/* Sensors */
-GPIO(LID_ACCEL_INT_L,       PIN(5, 6), GPIO_INPUT)     /* Lid accel sensor interrupt */
-/* Control the gate for trackpad IRQ. High closes the gate.
- * This is always set low so that the OS can manage the trackpad. */
-GPIO(TRACKPAD_INT_GATE,     PIN(7, 4), GPIO_OUT_LOW)
-
-/* USB-C */
-GPIO(USB_C0_PD_RST_L,       PIN(F, 1), GPIO_ODR_HIGH)  /* Port-0 TCPC chip reset, actaully Open-Drain */
-GPIO(USB_C1_PD_RST_L,       PIN(E, 4), GPIO_ODR_HIGH)  /* Port-1 TCPC chip reset, actually Open-Drain */
-GPIO(DP_MUX_OE_L,           PIN(9, 6), GPIO_ODR_HIGH)  /* DP mux enable, actually Open-Drain */
-GPIO(DP_MUX_SEL,            PIN(4, 5), GPIO_OUT_LOW)   /* DP mux selection: L:C0, H:C1 */
-GPIO(DP_HOT_PLUG_DET,       PIN(9, 5), GPIO_OUT_LOW)   /* DP HPD to AP */
-
-/* USB-A */
-GPIO(EN_USB_A_5V,           PIN(8, 6), GPIO_OUT_LOW)
-GPIO(USB_A_CDP_ILIM_EN,     PIN(7, 5), GPIO_OUT_HIGH)  /* H: CDP, L:SDP. Only one USB-A port, always CDP */
-
-/* LEDs */
-GPIO(EC_CHG_LED_Y_C1,       PIN(C, 3), GPIO_OUT_LOW)
-GPIO(EC_CHG_LED_B_C1,       PIN(C, 4), GPIO_OUT_LOW)
-
-/*
- * SPI host interface - enable PDs by default. These will be made functional
- * by the SHI driver when the AP powers up, and restored back to GPIO when
- * the AP powers down.
- */
-GPIO(AP_EC_SPI_MOSI,        PIN(4, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(AP_EC_SPI_MISO,        PIN(4, 7), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(AP_EC_SPI_CLK,         PIN(5, 5), GPIO_INPUT | GPIO_PULL_DOWN)
-
-/* PWM */
-GPIO(KB_BL_PWM,             PIN(8, 0), GPIO_INPUT)     /* PWM3 */
-GPIO(EDP_BKLTCTL,           PIN(B, 7), GPIO_INPUT)     /* PWM5 */
-
-/* ADC */
-GPIO(PPVAR_BOOSTIN_SENSE,   PIN(4, 4), GPIO_INPUT)     /* ADC1 */
-GPIO(CHARGER_IADP,          PIN(4, 3), GPIO_INPUT)     /* ADC2 */
-GPIO(CHARGER_PMON,          PIN(4, 2), GPIO_INPUT)     /* ADC3 */
-
-/* I2C */
-GPIO(EC_I2C_POWER_SCL,      PIN(B, 5), GPIO_INPUT)
-GPIO(EC_I2C_POWER_SDA,      PIN(B, 4), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_PD_SCL,  PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_PD_SDA,  PIN(8, 7), GPIO_INPUT)
-GPIO(EC_I2C_USB_C1_PD_SCL,  PIN(9, 2), GPIO_INPUT)
-GPIO(EC_I2C_USB_C1_PD_SDA,  PIN(9, 1), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SCL,     PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SDA,     PIN(3, 6), GPIO_INPUT)
-GPIO(EC_I2C_SENSOR_SCL,     PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C_SENSOR_SDA,     PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V)
-
-/* Board/SKU IDs */
-GPIO(BRD_ID0,               PIN(C, 7), GPIO_INPUT)
-GPIO(BRD_ID1,               PIN(9, 3), GPIO_INPUT)
-GPIO(BRD_ID2,               PIN(6, 3), GPIO_INPUT)
-GPIO(SKU_ID0,               PIN(F, 0), GPIO_INPUT)
-GPIO(SKU_ID1,               PIN(4, 1), GPIO_INPUT)
-GPIO(SKU_ID2,               PIN(D, 4), GPIO_INPUT)
-
-/* Special straps */
-GPIO(ARM_X86,               PIN(6, 6), GPIO_OUT_LOW)  /* NC, low for power saving */
-
-/* Unused GPIOs, NC. */
-UNUSED(PIN(5, 1))
-UNUSED(PIN(D, 0))
-UNUSED(PIN(F, 3))
-UNUSED(PIN(0, 4))
-UNUSED(PIN(C, 0))
-UNUSED(PIN(A, 7))
-UNUSED(PIN(8, 3))
-UNUSED(PIN(8, 1))
-UNUSED(PIN(3, 7))
-UNUSED(PIN(7, 6))
-UNUSED(PIN(3, 4))
-UNUSED(PIN(C, 5))
-UNUSED(PIN(A, 3))
-UNUSED(PIN(7, 3))
-UNUSED(PIN(D, 7))
-UNUSED(PIN(A, 5))
-UNUSED(PIN(B, 0))
-UNUSED(PIN(9, 4))
-UNUSED(PIN(B, 1))
-UNUSED(PIN(6, 2))
-UNUSED(PIN(3, 5))
-UNUSED(PIN(9, 7))
-UNUSED(PIN(6, 0))
-UNUSED(PIN(7, 2))
-
-/* Alternate functions GPIO definitions */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)            /* UART (GPIO64/65) */
-ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0)             /* I2C0 (GPIOB4/B5) */
-ALTERNATE(PIN_MASK(9, 0x07), 1, MODULE_I2C, 0)             /* I2C1 SDA (GPIO90), I2C2 (GPIO91/92) */
-ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0)             /* I2C1 SCL (GPIO87) */
-ALTERNATE(PIN_MASK(3, 0x48), 1, MODULE_I2C, 0)             /* I2C5 (GPIO33/36) */
-ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, GPIO_SEL_1P8V) /* I2C7 (GPIOB2/B3) - 1.8V */
-ALTERNATE(PIN_MASK(4, 0x1C), 0, MODULE_ADC, 0)             /* ADC1 (GPIO44), ADC2 (GPIO43), ADC3 (GPIO42) */
-ALTERNATE(PIN_MASK(4, 0xC0), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SDO (GPIO47), SHI_SDI (GPIO46) */
-ALTERNATE(PIN_MASK(5, 0x28), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SCLK (GPIO55), SHI_CS# (GPIO53) */
-ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0)             /* PWM3 (GPIO80) - KB_BL_PWM */
-ALTERNATE(PIN_MASK(B, 0x80), 1, MODULE_PWM, 0)             /* PWM5 (GPIOB7) - EDP_BKLTCTL */
-
-/* Keyboard */
-#define GPIO_KB_INPUT           (GPIO_INPUT | GPIO_PULL_UP)
-#define GPIO_KB_OUTPUT          (GPIO_ODR_HIGH)
-#define GPIO_KB_OUTPUT_COL2     (GPIO_OUT_LOW)
-
-/* Keyboard alternate functions */
-ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO10 (GPIO07), KSO11 (GPIO06), KSO12 (GPIO05) */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO03 (GPIO16), KSO04 (GPIO15), KSO05 (GPIO14), KSO06 (GPIO13), KSO07 (GPIO12), KSO08 (GPIO11), KSO09 (GPIO10) */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)  /* KSO00 (GPIO21), KSO01 (GPIO20) */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)   /* KSI2 (GPIO27), KSI3 (GPIO26), KSI4 (GPIO25), KSI5 (GPIO24), KSI6 (GPIO23), KSI7 (GPIO22) */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)   /* KSI0 (GPIO31), KSI1 (GPIO30) */
-GPIO(EC_KSO_02_INV,       PIN(1, 7), GPIO_KB_OUTPUT_COL2)              /* KSO02 (GPIO17) */
diff --git a/board/lazor/hibernate.c b/board/lazor/hibernate.c
deleted file mode 100644
index 1187348e31..0000000000
--- a/board/lazor/hibernate.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "sku.h"
-#include "system.h"
-#include "usbc_ppc.h"
-
-void board_hibernate(void)
-{
-	int i;
-
-	if (!board_is_clamshell()) {
-		/*
-		 * Sensors are unpowered in hibernate. Apply PD to the
-		 * interrupt lines such that they don't float.
-		 */
-		gpio_set_flags(GPIO_ACCEL_GYRO_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-		gpio_set_flags(GPIO_LID_ACCEL_INT_L,
-			       GPIO_INPUT | GPIO_PULL_DOWN);
-	}
-
-	/*
-	 * Board rev 5+ has the hardware fix. Don't need the following
-	 * workaround.
-	 */
-	if (system_get_board_version() >= 5)
-		return;
-
-	/*
-	 * Enable the PPC power sink path before EC enters hibernate;
-	 * otherwise, ACOK won't go High and can't wake EC up. Check the
-	 * bug b/170324206 for details.
-	 */
-	for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++)
-		ppc_vbus_sink_enable(i, 1);
-}
diff --git a/board/lazor/led.c b/board/lazor/led.c
deleted file mode 100644
index f9c91c1c6a..0000000000
--- a/board/lazor/led.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control.
- */
-
-#include "battery.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "chipset.h"
-#include "ec_commands.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "led_common.h"
-#include "system.h"
-#include "util.h"
-
-#define LED_ONE_SEC (1000 / HOOK_TICK_INTERVAL_MS)
-
-#define BAT_LED_ON 1
-#define BAT_LED_OFF 0
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_BATTERY_LED,
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-enum led_color {
-	LED_OFF = 0,
-	LED_AMBER,
-	LED_BLUE,
-	LED_COLOR_COUNT  /* Number of colors, not a color itself */
-};
-
-static void led_set_color(enum led_color color)
-{
-	gpio_set_level(GPIO_EC_CHG_LED_Y_C1,
-		(color == LED_AMBER) ? BAT_LED_ON : BAT_LED_OFF);
-	gpio_set_level(GPIO_EC_CHG_LED_B_C1,
-		(color == LED_BLUE) ? BAT_LED_ON : BAT_LED_OFF);
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	brightness_range[EC_LED_COLOR_AMBER] = 1;
-	brightness_range[EC_LED_COLOR_BLUE] = 1;
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	if (brightness[EC_LED_COLOR_BLUE] != 0)
-		led_set_color(LED_BLUE);
-	else if (brightness[EC_LED_COLOR_AMBER] != 0)
-		led_set_color(LED_AMBER);
-	else
-		led_set_color(LED_OFF);
-
-	return EC_SUCCESS;
-}
-
-static void board_led_set_battery(void)
-{
-	static int battery_ticks;
-	int color = LED_OFF;
-	int period = 0;
-	uint32_t chflags = charge_get_flags();
-
-	battery_ticks++;
-
-	switch (charge_get_state()) {
-	case PWR_STATE_CHARGE:
-		/* Always indicate amber on when charging. */
-		color = LED_AMBER;
-		break;
-	case PWR_STATE_DISCHARGE:
-		if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND)) {
-			/* Discharging in S3: Amber 1 sec, off 3 sec */
-			period = (1 + 3) * LED_ONE_SEC;
-			battery_ticks = battery_ticks % period;
-			if (battery_ticks < 1 * LED_ONE_SEC)
-				color = LED_AMBER;
-			else
-				color = LED_OFF;
-		} else if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
-			/* Discharging in S5: off */
-			color = LED_OFF;
-		} else if (chipset_in_state(CHIPSET_STATE_ON)) {
-			/* Discharging in S0: Blue on */
-			color = LED_BLUE;
-		}
-		break;
-	case PWR_STATE_ERROR:
-		/* Battery error: Amber 1 sec, off 1 sec */
-		period = (1 + 1) * LED_ONE_SEC;
-		battery_ticks = battery_ticks % period;
-		if (battery_ticks < 1 * LED_ONE_SEC)
-			color = LED_AMBER;
-		else
-			color = LED_OFF;
-		break;
-	case PWR_STATE_CHARGE_NEAR_FULL:
-		/* Full Charged: Blue on */
-		color = LED_BLUE;
-		break;
-	case PWR_STATE_IDLE: /* External power connected in IDLE */
-		if (chflags & CHARGE_FLAG_FORCE_IDLE) {
-			/* Factory mode: Blue 2 sec, Amber 2 sec */
-			period = (2 + 2) * LED_ONE_SEC;
-			battery_ticks = battery_ticks % period;
-			if (battery_ticks < 2 * LED_ONE_SEC)
-				color = LED_BLUE;
-			else
-				color = LED_AMBER;
-		} else
-			color = LED_BLUE;
-		break;
-	default:
-		/* Other states don't alter LED behavior */
-		break;
-	}
-
-	led_set_color(color);
-}
-
-/* Called by hook task every TICK */
-static void led_tick(void)
-{
-	if (led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED))
-		board_led_set_battery();
-}
-DECLARE_HOOK(HOOK_TICK, led_tick, HOOK_PRIO_DEFAULT);
-
-void led_control(enum ec_led_id led_id, enum ec_led_state state)
-{
-	enum led_color color;
-
-	if ((led_id != EC_LED_ID_RECOVERY_HW_REINIT_LED) &&
-	    (led_id != EC_LED_ID_SYSRQ_DEBUG_LED))
-		return;
-
-	if (state == LED_STATE_RESET) {
-		led_auto_control(EC_LED_ID_BATTERY_LED, 1);
-		board_led_set_battery();
-		return;
-	}
-
-	color = state ? LED_BLUE : LED_OFF;
-
-	led_auto_control(EC_LED_ID_BATTERY_LED, 0);
-
-	led_set_color(color);
-}
diff --git a/board/lazor/sku.c b/board/lazor/sku.c
deleted file mode 100644
index 815295d9f5..0000000000
--- a/board/lazor/sku.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "config.h"
-#include "console.h"
-#include "driver/ln9310.h"
-#include "tcpm/ps8xxx_public.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "sku.h"
-#include "system.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-static uint8_t sku_id;
-
-enum board_model {
-	LAZOR,
-	LIMOZEEN,
-	UNKNOWN,
-};
-
-static const char *const model_name[] = {
-	"LAZOR",
-	"LIMOZEEN",
-	"UNKNOWN",
-};
-
-static enum board_model get_model(void)
-{
-	if (sku_id == 0 || sku_id == 1 || sku_id == 2 || sku_id == 3)
-		return LAZOR;
-	if (sku_id == 4 || sku_id == 5 || sku_id == 6)
-		return LIMOZEEN;
-	return UNKNOWN;
-}
-
-/* Read SKU ID from GPIO and initialize variables for board variants */
-static void sku_init(void)
-{
-	sku_id = system_get_sku_id();
-	CPRINTS("SKU: %u (%s)", sku_id, model_name[get_model()]);
-}
-DECLARE_HOOK(HOOK_INIT, sku_init, HOOK_PRIO_INIT_I2C + 1);
-
-enum battery_cell_type board_get_battery_cell_type(void)
-{
-	switch (get_model()) {
-	case LIMOZEEN:
-		return BATTERY_CELL_TYPE_3S;
-	default:
-		return BATTERY_CELL_TYPE_UNKNOWN;
-	}
-}
-
-int board_is_clamshell(void)
-{
-	return get_model() == LIMOZEEN;
-}
-
-__override uint16_t board_get_ps8xxx_product_id(int port)
-{
-	/*
-	 * Lazor (SKU_ID: 0, 1, 2, 3) rev 3+ changes TCPC from PS8751 to
-	 * PS8805.
-	 *
-	 * Limozeen (SKU_ID: 4, 5, 6) all-rev uses PS8805.
-	 */
-	if (get_model() == LAZOR && system_get_board_version() < 3)
-		return PS8751_PRODUCT_ID;
-
-	return PS8805_PRODUCT_ID;
-}
-
-int board_has_da9313(void)
-{
-	return get_model() == LAZOR;
-}
-
-int board_has_buck_ic(void)
-{
-	return get_model() == LIMOZEEN && system_get_board_version() >= 8;
-}
-
-int board_has_ln9310(void)
-{
-	return get_model() == LIMOZEEN && system_get_board_version() < 8;
-}
diff --git a/board/lazor/sku.h b/board/lazor/sku.h
deleted file mode 100644
index 96eaf2bb92..0000000000
--- a/board/lazor/sku.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lazor board-specific SKU configuration */
-
-#ifndef __CROS_EC_SKU_H
-#define __CROS_EC_SKU_H
-
-int board_get_version(void);
-int board_is_clamshell(void);
-int board_has_da9313(void);
-int board_has_ln9310(void);
-int board_has_buck_ic(void);
-
-#endif /* __CROS_EC_SKU_H */
diff --git a/board/lazor/switchcap.c b/board/lazor/switchcap.c
deleted file mode 100644
index 16f4a54c79..0000000000
--- a/board/lazor/switchcap.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "config.h"
-#include "console.h"
-#include "driver/ln9310.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "power/qcom.h"
-#include "system.h"
-#include "sku.h"
-
-#define CPRINTS(format, args...) cprints(CC_I2C, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_I2C, format, ## args)
-
-/* LN9310 switchcap */
-const struct ln9310_config_t ln9310_config = {
-	.i2c_port = I2C_PORT_POWER,
-	.i2c_addr_flags = LN9310_I2C_ADDR_0_FLAGS,
-};
-
-static void switchcap_init(void)
-{
-	if (board_has_da9313()) {
-		CPRINTS("Use switchcap: DA9313");
-
-		/*
-		 * When the chip in power down mode, it outputs high-Z.
-		 * Set pull-down to avoid floating.
-		 */
-		gpio_set_flags(GPIO_DA9313_GPIO0, GPIO_INPUT | GPIO_PULL_DOWN);
-
-		/*
-		 * Configure DA9313 enable, push-pull output. Don't set the
-		 * level here; otherwise, it will override its value and
-		 * shutdown the switchcap when sysjump to RW.
-		 */
-		gpio_set_flags(GPIO_SWITCHCAP_ON, GPIO_OUTPUT);
-	} else if (board_has_ln9310()) {
-		CPRINTS("Use switchcap: LN9310");
-
-		/* Configure and enable interrupt for LN9310 */
-		gpio_set_flags(GPIO_SWITCHCAP_PG_INT_L, GPIO_INT_FALLING);
-		gpio_enable_interrupt(GPIO_SWITCHCAP_PG_INT_L);
-
-		/*
-		 * Configure LN9310 enable, open-drain output. Don't set the
-		 * level here; otherwise, it will override its value and
-		 * shutdown the switchcap when sysjump to RW.
-		 *
-		 * Note that the gpio.inc configures it GPIO_OUT_LOW. When
-		 * sysjump to RW, will output push-pull a short period of
-		 * time. As it outputs LOW, should be fine.
-		 *
-		 * This GPIO changes like:
-		 * (1) EC boots from RO -> high-Z
-		 * (2) GPIO init according to gpio.inc -> push-pull LOW
-		 * (3) This function configures it -> open-drain HIGH
-		 * (4) Power sequence turns on the switchcap -> open-drain LOW
-		 * (5) EC sysjumps to RW
-		 * (6) GPIO init according to gpio.inc -> push-pull LOW
-		 * (7) This function configures it -> open-drain LOW
-		 */
-		gpio_set_flags(GPIO_SWITCHCAP_ON_L,
-			       GPIO_OUTPUT | GPIO_OPEN_DRAIN);
-
-		/* Only configure the switchcap if not sysjump */
-		if (!system_jumped_late()) {
-			/*
-			 * Deassert the enable pin (set it HIGH), so the
-			 * switchcap won't be enabled after the switchcap is
-			 * configured from standby mode to switching mode.
-			 */
-			gpio_set_level(GPIO_SWITCHCAP_ON_L, 1);
-			ln9310_init();
-		}
-	} else if (board_has_buck_ic()) {
-		CPRINTS("Use Buck IC");
-	} else {
-		CPRINTS("ERROR: No switchcap solution");
-	}
-}
-DECLARE_HOOK(HOOK_INIT, switchcap_init, HOOK_PRIO_DEFAULT);
-
-void board_set_switchcap_power(int enable)
-{
-	if (board_has_da9313()) {
-		gpio_set_level(GPIO_SWITCHCAP_ON, enable);
-	} else if (board_has_ln9310()) {
-		gpio_set_level(GPIO_SWITCHCAP_ON_L, !enable);
-		ln9310_software_enable(enable);
-	} else if (board_has_buck_ic()) {
-		gpio_set_level(GPIO_VBOB_EN, enable);
-	}
-}
-
-int board_is_switchcap_enabled(void)
-{
-	if (board_has_da9313())
-		return gpio_get_level(GPIO_SWITCHCAP_ON);
-	else if (board_has_ln9310())
-		return !gpio_get_level(GPIO_SWITCHCAP_ON_L);
-
-	/* Board has buck ic*/
-	return gpio_get_level(GPIO_VBOB_EN);
-}
-
-int board_is_switchcap_power_good(void)
-{
-	if (board_has_da9313())
-		return gpio_get_level(GPIO_DA9313_GPIO0);
-	else if (board_has_ln9310())
-		return ln9310_power_good();
-
-	/* Board has buck ic no way to check POWER GOOD */
-	return 1;
-}
diff --git a/board/lazor/usbc_config.c b/board/lazor/usbc_config.c
deleted file mode 100644
index f8c9662136..0000000000
--- a/board/lazor/usbc_config.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Lazor board-specific USB-C configuration */
-
-#include "battery_fuel_gauge.h"
-#include "bc12/pi3usb9201_public.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "common.h"
-#include "config.h"
-#include "driver/ln9310.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "ppc/sn5s330_public.h"
-#include "system.h"
-#include "tcpm/ps8xxx_public.h"
-#include "tcpm/tcpci.h"
-#include "timer.h"
-#include "usb_pd.h"
-#include "usbc_config.h"
-#include "usb_mux.h"
-#include "usbc_ocp.h"
-#include "usbc_ppc.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-void usb0_evt(enum gpio_signal signal)
-{
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-void usb1_evt(enum gpio_signal signal)
-{
-	task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12);
-}
-
-static void usba_oc_deferred(void)
-{
-	/* Use next number after all USB-C ports to indicate the USB-A port */
-	board_overcurrent_event(CONFIG_USB_PD_PORT_MAX_COUNT,
-				!gpio_get_level(GPIO_USB_A0_OC_ODL));
-}
-DECLARE_DEFERRED(usba_oc_deferred);
-
-void usba_oc_interrupt(enum gpio_signal signal)
-{
-	hook_call_deferred(&usba_oc_deferred_data, 0);
-}
-
-void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_SWCTL_INT_ODL:
-		sn5s330_interrupt(0);
-		break;
-	case GPIO_USB_C1_SWCTL_INT_ODL:
-		sn5s330_interrupt(1);
-		break;
-	default:
-		break;
-	}
-}
-
-static void board_connect_c0_sbu_deferred(void)
-{
-	/*
-	 * If CCD_MODE_ODL asserts, it means there's a debug accessory connected
-	 * and we should enable the SBU FETs.
-	 */
-	ppc_set_sbu(0, 1);
-}
-DECLARE_DEFERRED(board_connect_c0_sbu_deferred);
-
-void board_connect_c0_sbu(enum gpio_signal s)
-{
-	hook_call_deferred(&board_connect_c0_sbu_deferred_data, 0);
-}
-
-/* GPIO Interrupt Handlers */
-void tcpc_alert_event(enum gpio_signal signal)
-{
-	int port = -1;
-
-	switch (signal) {
-	case GPIO_USB_C0_PD_INT_ODL:
-		port = 0;
-		break;
-	case GPIO_USB_C1_PD_INT_ODL:
-		port = 1;
-		break;
-	default:
-		return;
-	}
-
-	schedule_deferred_pd_interrupt(port);
-}
-
-/* Power Path Controller */
-struct ppc_config_t ppc_chips[] = {
-	{
-		.i2c_port = I2C_PORT_TCPC0,
-		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
-		.drv = &sn5s330_drv
-	},
-	{
-		.i2c_port = I2C_PORT_TCPC1,
-		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
-		.drv = &sn5s330_drv
-	},
-};
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-/* TCPC mux configuration */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC0,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-	},
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_TCPC1,
-			.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-		},
-		.drv = &ps8xxx_tcpm_drv,
-	},
-};
-
-/*
- * Port-0/1 USB mux driver.
- *
- * The USB mux is handled by TCPC chip and the HPD update is through a GPIO
- * to AP. But the TCPC chip is also needed to know the HPD status; otherwise,
- * the mux misbehaves.
- */
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.driver = &tcpci_tcpm_usb_mux_driver,
-		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	},
-	{
-		.usb_port = 1,
-		.driver = &tcpci_tcpm_usb_mux_driver,
-		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	}
-};
-
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_USB_A_5V,
-};
-
-/* BC1.2 */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_POWER,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	{
-		.i2c_port = I2C_PORT_EEPROM,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-
-__override int board_get_default_battery_type(void)
-{
-	/*
-	 * A 2S battery is set as default. If the board is configured to use
-	 * a 3S battery, according to its SKU_ID, return a 3S battery as
-	 * default. It helps to configure the charger to output a correct
-	 * voltage in case the battery is not attached.
-	 */
-	if (board_get_battery_cell_type() == BATTERY_CELL_TYPE_3S)
-		return BATTERY_LGC_AP18C8K;
-
-	return DEFAULT_BATTERY_TYPE;
-}
-
-/* Initialize board USC-C things */
-static void board_init_usbc(void)
-{
-	/* Enable BC1.2 interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_L);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_L);
-
-	/* Enable USB-A overcurrent interrupt */
-	gpio_enable_interrupt(GPIO_USB_A0_OC_ODL);
-	/*
-	 * The H1 SBU line for CCD are behind PPC chip. The PPC internal FETs
-	 * for SBU may be disconnected after DP alt mode is off. Should enable
-	 * the CCD_MODE_ODL interrupt to make sure the SBU FETs are connected.
-	 */
-	gpio_enable_interrupt(GPIO_CCD_MODE_ODL);
-}
-DECLARE_HOOK(HOOK_INIT, board_init_usbc, HOOK_PRIO_DEFAULT);
-
-void board_tcpc_init(void)
-{
-	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_late()) {
-		/* TODO(crosbug.com/p/61098): How long do we need to wait? */
-		board_reset_pd_mcu();
-	}
-
-	/* Enable PPC interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_SWCTL_INT_ODL);
-
-	/* Enable TCPC interrupts */
-	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);
-
-	/*
-	 * Initialize HPD to low; after sysjump SOC needs to see
-	 * HPD pulse to enable video path
-	 */
-	for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port)
-		usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED |
-					 USB_PD_MUX_HPD_IRQ_DEASSERTED);
-}
-DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1);
-
-void board_reset_pd_mcu(void)
-{
-	cprints(CC_USB, "Resetting TCPCs...");
-	cflush();
-
-	gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
-	msleep(PS8XXX_RESET_DELAY_MS);
-	gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
-}
-
-void board_set_tcpc_power_mode(int port, int mode)
-{
-	/* Ignore the "mode" to turn the chip on.  We can only do a reset. */
-	if (mode)
-		return;
-
-	board_reset_pd_mcu();
-}
-
-int board_vbus_sink_enable(int port, int enable)
-{
-	/* Both ports are controlled by PPC SN5S330 */
-	return ppc_vbus_sink_enable(port, enable);
-}
-
-int board_is_sourcing_vbus(int port)
-{
-	/* Both ports are controlled by PPC SN5S330 */
-	return ppc_is_sourcing_vbus(port);
-}
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	/* TODO(b/120231371): Notify AP */
-	CPRINTS("p%d: overcurrent!", port);
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_real_port = (port >= 0 &&
-			    port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int i;
-
-	if (!is_real_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	if (port == CHARGE_PORT_NONE) {
-		CPRINTS("Disabling all charging port");
-
-		/* Disable all ports. */
-		for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
-			/*
-			 * Do not return early if one fails otherwise we can
-			 * get into a boot loop assertion failure.
-			 */
-			if (board_vbus_sink_enable(i, 0))
-				CPRINTS("Disabling p%d sink path failed.", i);
-		}
-
-		return EC_SUCCESS;
-	}
-
-	/* Check if the port is sourcing VBUS. */
-	if (board_is_sourcing_vbus(port)) {
-		CPRINTS("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-
-	CPRINTS("New charge port: p%d", port);
-
-	/*
-	 * Turn off the other ports' sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) {
-		if (i == port)
-			continue;
-
-		if (board_vbus_sink_enable(i, 0))
-			CPRINTS("p%d: sink path disable failed.", i);
-	}
-
-	/* Enable requested charge port. */
-	if (board_vbus_sink_enable(port, 1)) {
-		CPRINTS("p%d: sink path enable failed.", port);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
-			    int max_ma, int charge_mv)
-{
-	/*
-	 * Ignore lower charge ceiling on PD transition if our battery is
-	 * critical, as we may brownout.
-	 */
-	if (supplier == CHARGE_SUPPLIER_PD &&
-	    charge_ma < 1500 &&
-	    charge_get_percent() < CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON) {
-		CPRINTS("Using max ilim %d", max_ma);
-		charge_ma = max_ma;
-	}
-
-	charge_set_input_current_limit(MAX(charge_ma,
-					   CONFIG_CHARGER_INPUT_CURRENT),
-				       charge_mv);
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL))
-		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_0;
-	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL))
-		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_1;
-
-	return status;
-}
diff --git a/board/lazor/usbc_config.h b/board/lazor/usbc_config.h
deleted file mode 100644
index 9c1d8d1e74..0000000000
--- a/board/lazor/usbc_config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* lazor board-specific USB-C configuration */
-
-#ifndef __CROS_EC_USBC_CONFIG_H
-#define __CROS_EC_USBC_CONFIG_H
-
-#include "gpio.h"
-
-void tcpc_alert_event(enum gpio_signal signal);
-void usb0_evt(enum gpio_signal signal);
-void usb1_evt(enum gpio_signal signal);
-void usba_oc_interrupt(enum gpio_signal signal);
-void ppc_interrupt(enum gpio_signal signal);
-void board_connect_c0_sbu(enum gpio_signal s);
-
-#endif /* __CROS_EC_USBC_CONFIG_H */
diff --git a/board/lazor/vif_override.xml b/board/lazor/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/lazor/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->