diff options
author | Diana Z <dzigterman@chromium.org> | 2018-11-13 14:39:51 -0700 |
---|---|---|
committer | chrome-bot <chrome-bot@chromium.org> | 2018-11-15 13:16:10 -0800 |
commit | 618ab07b7078075ed94f5488bd984065fc5831f4 (patch) | |
tree | 72a3612aeeb9ed2eef5e3b80f63bedec55d271e7 /board/meep | |
parent | 72a29e834d035c29e5127ad9dfba76d0ba06e694 (diff) | |
download | chrome-ec-618ab07b7078075ed94f5488bd984065fc5831f4.tar.gz |
Meep: update EC GPIOs for board version 1
Between board versions 0 and 1, meep added the Analogix reset GPIO.
This line should never be driven high on proto boards, so it's set
to open drain on board version 0.
Other changes include reallocation of the previous WoV pins, and a
renaming of the CCD_MODE pin.
BRANCH=None
BUG=None
TEST=imaged meep proto to verify C0 reset was low, imaged meep EVT and
verified default GPIO levels
Change-Id: I22b40883b8677327887b92922d63d421e1a27596
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1334531
Reviewed-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Diffstat (limited to 'board/meep')
-rw-r--r-- | board/meep/board.c | 15 | ||||
-rw-r--r-- | board/meep/gpio.inc | 18 |
2 files changed, 20 insertions, 13 deletions
diff --git a/board/meep/board.c b/board/meep/board.c index 8b966135ca..12c08c3452 100644 --- a/board/meep/board.c +++ b/board/meep/board.c @@ -251,6 +251,18 @@ int board_is_convertible(void) return sku_id == 1 || sku_id == 2 || sku_id == 3 || sku_id == 255; } +static void board_update_gpio_from_board_id(uint32_t board_id) +{ + if (board_id == 0) { + /* + * USB2_OTG_ID is 1.8V pin on the SoC side with an internal + * pull-up. However, it is 3.3V on the EC side. So, configure + * it as ODR so that the EC never drives it high. + */ + gpio_set_flags(GPIO_USB_C0_PD_RST, GPIO_ODR_LOW); + } +} + static void board_update_sensor_config_from_sku(void) { if (board_is_convertible()) { @@ -269,6 +281,9 @@ static void cbi_init(void) sku_id = val; ccprints("SKU: 0x%04x", sku_id); + if (cbi_get_board_version(&val) == EC_SUCCESS) + board_update_gpio_from_board_id(val); + board_update_sensor_config_from_sku(); } DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); diff --git a/board/meep/gpio.inc b/board/meep/gpio.inc index 6b3d5c8a6f..2d2946a5d8 100644 --- a/board/meep/gpio.inc +++ b/board/meep/gpio.inc @@ -119,6 +119,7 @@ GPIO(EN_USB_A0_5V, PIN(6, 7), GPIO_OUT_LOW) /* Enable A0 5V Charging */ GPIO(EN_USB_A1_5V, PIN(9, 6), GPIO_OUT_LOW) /* Enable A1 5V Charging */ GPIO(USB_A0_CHARGE_EN_L, PIN(A, 2), GPIO_OUT_HIGH) /* Enable A0 1.5A Charging */ GPIO(USB_A1_CHARGE_EN_L, PIN(A, 0), GPIO_OUT_HIGH) /* Enable A1 1.5A Charging */ +GPIO(USB_C0_PD_RST, PIN(8, 3), GPIO_OUT_LOW) /* C0 PD Reset */ GPIO(USB_C0_BC12_VBUS_ON, PIN(6, 3), GPIO_OUT_LOW) /* C0 BC1.2 Power */ GPIO(USB_C0_BC12_CHG_DET_L, PIN(9, 5), GPIO_INPUT) /* C0 BC1.2 Detect */ GPIO(USB_C0_HPD_1V8_ODL, PIN(C, 5), GPIO_INPUT | /* C0 DP Hotplug Detect */ @@ -129,16 +130,6 @@ GPIO(USB_C1_BC12_CHG_DET_L, PIN(E, 4), GPIO_INPUT) /* C1 BC1.2 Detect */ GPIO(USB_C1_HPD_1V8_ODL, PIN(C, 6), GPIO_INPUT | /* C1 DP Hotplug Detect */ GPIO_SEL_1P8V) -/* Not implemented in hardware yet */ -UNIMPLEMENTED(USB_C0_PD_RST) - -/* - * USB2_OTG_ID is 1.8V pin on the SoC side with an internal pull-up. However, it - * 3.3V on the EC side. So, configure it as ODR so that the EC never drives it - * high. - */ -GPIO(USB2_OTG_ID, PIN(8, 3), GPIO_ODR_LOW) /* USB_OTG */ - /* LED */ GPIO(BAT_LED_AMBER_L, PIN(C, 3), GPIO_OUT_HIGH) /* LED_1_L */ GPIO(BAT_LED_WHITE_L, PIN(C, 4), GPIO_OUT_HIGH) /* LED_2_L */ @@ -147,8 +138,8 @@ GPIO(PWR_LED_WHITE_L, PIN(D, 7), GPIO_OUT_HIGH) /* LED_3_L */ /* Keyboard Backlight */ GPIO(KB_BL_PWR_EN, PIN(6, 2), GPIO_OUT_LOW) -/* Camera */ -GPIO(WFCAM_VSYNC, PIN(0, 3), GPIO_INPUT) /* TP only */ +/* MKBP event synchronization */ +GPIO(EC_INT_L, PIN(9, 4), GPIO_INPUT) /* EC_AP_INT_ODL - currently unused */ /* Overcurrent event to host */ GPIO(USB_C_OC, PIN(3, 6), GPIO_ODR_HIGH | GPIO_SEL_1P8V) @@ -158,8 +149,9 @@ GPIO(GPO66_NC, PIN(6, 6), GPIO_INPUT | GPIO_PULL_UP) /* GPO66_ARM_L_X86 */ GPIO(GPOB6_NC, PIN(B, 6), GPIO_INPUT | GPIO_PULL_UP) /* EC_GP_SEL_ODL */ /* Misc */ -GPIO(CCD_MODE_ODL, PIN(E, 3), GPIO_INPUT) +GPIO(CCD_MODE_EC_L, PIN(E, 3), GPIO_INPUT) GPIO(TRACKPAD_INT_1V8_ODL, PIN(9, 3), GPIO_INPUT) +GPIO(EC_GPIO_03, PIN(0, 3), GPIO_INPUT) /* TP only */ /* Keyboard pins */ ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */ |