diff options
author | Denis Brockus <dbrockus@google.com> | 2020-08-05 07:41:27 -0600 |
---|---|---|
committer | Commit Bot <commit-bot@chromium.org> | 2020-08-07 05:08:40 +0000 |
commit | 0049193f4bf8cfa583852fcd9d857b2947232c81 (patch) | |
tree | d36c3ba0ae84bd703146f67e4bdd930ed39b616c /board/morphius | |
parent | 265cafd2bdd62c6b4c7900b4fc5024558637ed1e (diff) | |
download | chrome-ec-0049193f4bf8cfa583852fcd9d857b2947232c81.tar.gz |
morphius: dynamic ioex remapping for board version2/3
BUG=b:162700010
BRANCH=none
TEST=make buildall
Signed-off-by: Denis Brockus <dbrockus@google.com>
Change-Id: I6ec5ea7c84c731d074e088a1bf13b4b5aa1150dc
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2338980
Tested-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
Diffstat (limited to 'board/morphius')
-rw-r--r-- | board/morphius/board.c | 87 | ||||
-rw-r--r-- | board/morphius/gpio.inc | 22 |
2 files changed, 102 insertions, 7 deletions
diff --git a/board/morphius/board.c b/board/morphius/board.c index a0f7e1d595..164b96c762 100644 --- a/board/morphius/board.c +++ b/board/morphius/board.c @@ -256,20 +256,38 @@ BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT); * Use FW_CONFIG to set correct configuration. */ +static uint32_t board_ver; enum gpio_signal gpio_ec_ps2_reset = GPIO_EC_PS2_RESET_V1; static void board_remap_gpio(void) { - uint32_t board_ver = 0; - - cbi_get_board_version(&board_ver); - if (board_ver >= 3) { + int rv; + gpio_ec_ps2_reset = GPIO_EC_PS2_RESET_V1; ccprintf("GPIO_EC_PS2_RESET_V1\n"); + + /* + * TODO(dbrockus@): remove code when older version_2 + * hardware is retired and no longer needed + */ + rv = ioex_set_flags(IOEX_HDMI_POWER_EN_DB, GPIO_OUT_LOW); + rv |= ioex_set_flags(IOEX_USB_C1_PPC_ILIM_3A_EN, GPIO_OUT_LOW); + if (rv) + ccprintf("IOEX Board>=3 Remap FAILED\n"); } else { gpio_ec_ps2_reset = GPIO_EC_PS2_RESET_V0; ccprintf("GPIO_EC_PS2_RESET_V0\n"); + + /* + * TODO(dbrockus@): remove code when older version_2 + * hardware is retired and no longer needed + */ + if (ec_config_has_mst_hub_rtd2141b()) + ioex_enable_interrupt(IOEX_MST_HPD_OUT); + + if (ec_config_has_hdmi_retimer_pi3hdx1204()) + ioex_enable_interrupt(IOEX_HDMI_CONN_HPD_3V3_DB); } support_aoz_ppc = (board_ver == 3); @@ -281,6 +299,8 @@ static void board_remap_gpio(void) void setup_fw_config(void) { + cbi_get_board_version(&board_ver); + /* Enable Gyro interrupts */ gpio_enable_interrupt(GPIO_6AXIS_INT_L); @@ -445,7 +465,8 @@ static void board_chipset_startup(void) sb_smart_charge_mode(SB_SMART_CHARGE_DISABLE); /* hdmi retimer power on */ - ioex_set_level(IOEX_HDMI_POWER_EN_DB, 1); + if (board_ver >= 3) + ioex_set_level(IOEX_HDMI_POWER_EN_DB, 1); } DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_startup, HOOK_PRIO_DEFAULT); @@ -456,7 +477,8 @@ static void board_chipset_suspend(void) sb_smart_charge_mode(SB_SMART_CHARGE_ENABLE); /* hdmi retimer power off */ - ioex_set_level(IOEX_HDMI_POWER_EN_DB, 0); + if (board_ver >= 3) + ioex_set_level(IOEX_HDMI_POWER_EN_DB, 0); } DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); @@ -493,9 +515,11 @@ __override int board_aoz1380_set_vbus_source_current_limit(int port, if (port == 0) { rv = ioex_set_level(IOEX_USB_C0_PPC_ILIM_3A_EN, (rp == TYPEC_RP_3A0) ? 1 : 0); - } else { + } else if (board_ver >= 3) { rv = ioex_set_level(IOEX_USB_C1_PPC_ILIM_3A_EN, (rp == TYPEC_RP_3A0) ? 1 : 0); + } else { + rv = 1; } return rv; @@ -566,3 +590,52 @@ const int keyboard_factory_scan_pins_used = ARRAY_SIZE(keyboard_factory_scan_pins); #endif +/***************************************************************************** + * MST hub + * + * TODO(dbrockus@): remove VERSION_2 code when older version of hardware is + * retired and no longer needed + */ +static void mst_hpd_handler(void) +{ + int hpd = 0; + + /* + * Ensure level on GPIO_EC_DP1_HPD matches IOEX_MST_HPD_OUT, in case + * we got out of sync. + */ + ioex_get_level(IOEX_MST_HPD_OUT, &hpd); + gpio_set_level(GPIO_EC_DP1_HPD, hpd); + ccprints("MST HPD %d", hpd); +} +DECLARE_DEFERRED(mst_hpd_handler); + +void mst_hpd_interrupt(enum ioex_signal signal) +{ + /* + * Goal is to pass HPD through from DB OPT3 MST hub to AP's DP1. + * Immediately invert GPIO_EC_DP1_HPD, to pass through the edge on + * IOEX_MST_HPD_OUT. Then check level after 2 msec debounce. + */ + int hpd = !gpio_get_level(GPIO_EC_DP1_HPD); + + gpio_set_level(GPIO_EC_DP1_HPD, hpd); + hook_call_deferred(&mst_hpd_handler_data, (2 * MSEC)); +} + +static void hdmi_hpd_handler(void) +{ + int hpd = 0; + + /* Pass HPD through from DB OPT1 HDMI connector to AP's DP1. */ + ioex_get_level(IOEX_HDMI_CONN_HPD_3V3_DB, &hpd); + gpio_set_level(GPIO_EC_DP1_HPD, hpd); + ccprints("HDMI HPD %d", hpd); +} +DECLARE_DEFERRED(hdmi_hpd_handler); + +void hdmi_hpd_interrupt(enum ioex_signal signal) +{ + /* Debounce for 2 msec. */ + hook_call_deferred(&hdmi_hpd_handler_data, (2 * MSEC)); +} diff --git a/board/morphius/gpio.inc b/board/morphius/gpio.inc index 247a600182..1d099c1140 100644 --- a/board/morphius/gpio.inc +++ b/board/morphius/gpio.inc @@ -80,9 +80,31 @@ IOEX(USB_A0_CHARGE_EN_L, EXPIN(USBC_PORT_C0, 1, 6), GPIO_OUT_HIGH) /* A0 5V High IOEX(USB_A1_RETIMER_EN, EXPIN(USBC_PORT_C1, 0, 0), GPIO_OUT_LOW) /* A1 Retimer Enable */ IOEX(PPC_ID, EXPIN(USBC_PORT_C1, 0, 1), GPIO_INPUT | GPIO_PULL_DOWN) /* PPC ID */ IOEX(USB_C1_HPD_IN_DB, EXPIN(USBC_PORT_C1, 0, 2), GPIO_OUT_LOW) /* C1 HPD */ + +/* + * TODO(dbrockus@): remove code when older version_2 of hardware is + * retired and no longer needed + */ +#if 0 IOEX(HDMI_POWER_EN_DB, EXPIN(USBC_PORT_C1, 0, 3), GPIO_OUT_LOW) /* HDMI retimer power enable */ +#else +#define IOEX_HDMI_POWER_EN_DB IOEX_MST_HPD_OUT +IOEX_INT(MST_HPD_OUT, EXPIN(USBC_PORT_C1, 0, 3), GPIO_INT_BOTH, mst_hpd_interrupt) +#endif + IOEX(USB_C1_TCPC_FASTSW_CTL_EN, EXPIN(USBC_PORT_C1, 0, 4), GPIO_OUT_LOW) /* C1 FastSwitch Control */ + +/* + * TODO(dbrockus@): remove code when older version_2 of hardware is + * retired and no longer needed + */ +#if 0 IOEX(USB_C1_PPC_ILIM_3A_EN, EXPIN(USBC_PORT_C1, 1, 0), GPIO_OUT_LOW) /* C1 3A Current Limit Enable */ +#else +#define IOEX_USB_C1_PPC_ILIM_3A_EN IOEX_HDMI_CONN_HPD_3V3_DB +IOEX_INT(HDMI_CONN_HPD_3V3_DB, EXPIN(USBC_PORT_C1, 1, 0), GPIO_INT_BOTH, hdmi_hpd_interrupt) +#endif + IOEX(USB_C1_MUX_RST_DB, EXPIN(USBC_PORT_C1, 1, 1), GPIO_OUT_LOW) /* C1 Mux Reset */ IOEX(USB_C1_PPC_EN_L, EXPIN(USBC_PORT_C1, 1, 3), GPIO_OUT_LOW) /* C1 PPC Enable */ IOEX(HDMI_DATA_EN_DB, EXPIN(USBC_PORT_C1, 1, 4), GPIO_OUT_HIGH) /* HDMI Retimer Enable */ |