ec: add initial nautilus board

For now use the files from poppy. To be changed later on.

BUG=b:66458931
TEST=emerge-nautilus chromeos-ec/make buildall -j

Change-Id: If829d7307f834f1f30878934623c0e9ee77b907d
Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/701996
Commit-Ready: Grace Kao <grace.kao@intel.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Reviewed-by: Philip Chen <philipchen@chromium.org>

1 files changed, 172 insertions, 0 deletions

diff --git a/board/nautilus/battery.c b/board/nautilus/battery.c
new file mode 100644
index 0000000000..246250a88c
--- /dev/null
+++ b/board/nautilus/battery.c
@@ -0,0 +1,172 @@
+/* Copyright 2016 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Placeholder values for temporary battery pack.
+ */
+
+#include "battery.h"
+#include "battery_smart.h"
+#include "charge_state.h"
+#include "console.h"
+#include "ec_commands.h"
+#include "extpower.h"
+#include "gpio.h"
+#include "util.h"
+
+static enum battery_present batt_pres_prev = BP_NOT_SURE;
+
+/* Shutdown mode parameter to write to manufacturer access register */
+#define SB_SHIP_MODE_REG	SB_MANUFACTURER_ACCESS
+#define SB_SHUTDOWN_DATA        0x0010
+
+static const struct battery_info info = {
+	.voltage_max = 13200,
+	.voltage_normal = 11550,
+	.voltage_min = 9100,
+	/* Pre-charge values. */
+	.precharge_current = 256, /* mA */
+
+	.start_charging_min_c = 0,
+	.start_charging_max_c = 50,
+	.charging_min_c = 0,
+	.charging_max_c = 60,
+	.discharging_min_c = 0,
+	.discharging_max_c = 60,
+};
+
+const struct battery_info *battery_get_info(void)
+{
+	return &info;
+}
+
+int board_cut_off_battery(void)
+{
+	int rv;
+
+	/* Ship mode command must be sent twice to take effect */
+	rv = sb_write(SB_SHIP_MODE_REG, SB_SHUTDOWN_DATA);
+
+	if (rv != EC_SUCCESS)
+		return rv;
+
+	return sb_write(SB_SHIP_MODE_REG, SB_SHUTDOWN_DATA);
+}
+
+int charger_profile_override(struct charge_state_data *curr)
+{
+	const struct battery_info *batt_info;
+	int bat_temp_c;
+
+	batt_info = battery_get_info();
+
+	if ((curr->batt.flags & BATT_FLAG_BAD_ANY) == BATT_FLAG_BAD_ANY) {
+		curr->requested_current = batt_info->precharge_current;
+		curr->requested_voltage = batt_info->voltage_max;
+		return 1000;
+	}
+
+	/* battery temp in 0.1 deg C */
+	bat_temp_c = curr->batt.temperature - 2731;
+
+	/* Don't charge if outside of allowable temperature range */
+	if (bat_temp_c >= batt_info->charging_max_c * 10 ||
+	    bat_temp_c < batt_info->charging_min_c * 10) {
+		curr->requested_current = 0;
+		curr->requested_voltage = 0;
+		curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE;
+		curr->state = ST_IDLE;
+	}
+	return 0;
+}
+
+/* Customs options controllable by host command. */
+#define PARAM_FASTCHARGE (CS_PARAM_CUSTOM_PROFILE_MIN + 0)
+
+enum ec_status charger_profile_override_get_param(uint32_t param,
+						  uint32_t *value)
+{
+	return EC_RES_INVALID_PARAM;
+}
+
+enum ec_status charger_profile_override_set_param(uint32_t param,
+						  uint32_t value)
+{
+	return EC_RES_INVALID_PARAM;
+}
+
+enum battery_present battery_hw_present(void)
+{
+	/* The GPIO is low when the battery is physically present */
+	return gpio_get_level(GPIO_BATTERY_PRESENT_L) ? BP_NO : BP_YES;
+}
+
+static int battery_init(void)
+{
+	int batt_status;
+
+	return battery_status(&batt_status) ? 0 :
+		!!(batt_status & STATUS_INITIALIZED);
+}
+
+/*
+ * Check for case where both XCHG and XDSG bits are set indicating that even
+ * though the FG can be read from the battery, the battery is not able to be
+ * charged or discharged. This situation will happen if a battery disconnect was
+ * intiaited via H1 setting the DISCONN signal to the battery. This will put the
+ * battery pack into a sleep state and when power is reconnected, the FG can be
+ * read, but the battery is still not able to provide power to the system. The
+ * calling function returns batt_pres = BP_NO, which instructs the charging
+ * state machine to prevent powering up the AP on battery alone which could lead
+ * to a brownout event when the battery isn't able yet to provide power to the
+ * system. .
+ */
+static int battery_check_disconnect(void)
+{
+	int rv;
+	uint8_t data[6];
+
+	/* Check if battery charging + discharging is disabled. */
+	rv = sb_read_mfgacc(PARAM_OPERATION_STATUS,
+			    SB_ALT_MANUFACTURER_ACCESS, data, sizeof(data));
+	if (rv)
+		return BATTERY_DISCONNECT_ERROR;
+
+	if ((data[3] & (BATTERY_DISCHARGING_DISABLED |
+			BATTERY_CHARGING_DISABLED)) ==
+	    (BATTERY_DISCHARGING_DISABLED | BATTERY_CHARGING_DISABLED))
+		return BATTERY_DISCONNECTED;
+
+	return BATTERY_NOT_DISCONNECTED;
+}
+
+enum battery_present battery_is_present(void)
+{
+	enum battery_present batt_pres;
+
+	/* Get the physical hardware status */
+	batt_pres = battery_hw_present();
+
+	/*
+	 * Make sure battery status is implemented, I2C transactions are
+	 * success & the battery status is Initialized to find out if it
+	 * is a working battery and it is not in the cut-off mode.
+	 *
+	 * If battery I2C fails but VBATT is high, battery is booting from
+	 * cut-off mode.
+	 *
+	 * FETs are turned off after Power Shutdown time.
+	 * The device will wake up when a voltage is applied to PACK.
+	 * Battery status will be inactive until it is initialized.
+	 */
+	if (batt_pres == BP_YES && batt_pres_prev != batt_pres &&
+	    (battery_is_cut_off() != BATTERY_CUTOFF_STATE_NORMAL ||
+	     battery_check_disconnect() != BATTERY_NOT_DISCONNECTED ||
+	     battery_init() == 0)) {
+		batt_pres = BP_NO;
+	}
+
+	batt_pres_prev = batt_pres;
+	return batt_pres;
+}
+