diff options
author | Wai-Hong Tam <waihong@google.com> | 2017-11-06 11:26:25 -0800 |
---|---|---|
committer | chrome-bot <chrome-bot@chromium.org> | 2017-11-06 17:26:16 -0800 |
commit | fca1b7b710898ff347465d839c14164d610f140d (patch) | |
tree | 0da058d8d7158d05c65df0d312f34148f0b0720c /board/nefario/board.c | |
parent | f48cf0e8b27fb484271540e4cc272aea581a3b48 (diff) | |
download | chrome-ec-fca1b7b710898ff347465d839c14164d610f140d.tar.gz |
flash_ec: Set NEED_SERVO according to chip name instead of board name
One can pass either a board name (e.g. hammer) or a chip name (stm32)
to the flash_ec command. If given a board name, will map to a proper
chip name and then call its chip-flashing method.
The NEED_SERVO variable ("no" if servo not needed) was set according
to the board name. It was broken if only given a chip name. It should
be set according to the chip name.
BUG=b:68943874
BRANCH=None
TEST=Flashed the Staff firmware
SERVO $ dut-control ec_boot_mode:on
DUT $ ectool gpioset PP3300_DX_BASE 0
DUT $ ectool gpioset PP3300_DX_BASE 1
DUT $ flash_ec --chip stm32_dfu --image staff_ec.bin
SERVO $ dut-control ec_boot_mode:off
DUT $ ectool gpioset PP3300_DX_BASE 0
DUT $ ectool gpioset PP3300_DX_BASE 1
Change-Id: I1799f083115bfdf203a405733c5baefadbe3fe3e
Signed-off-by: Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/755614
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Diffstat (limited to 'board/nefario/board.c')
0 files changed, 0 insertions, 0 deletions