omnigul: Modify GPIO config

Base on HW design remove the unused parts.

BUG=b:263223008, b:262494863
BRANCH=none
TEST=build omnigul success

Change-Id: Id245d2c5d8380954d569329a7ddf2b6c424e08f0
Signed-off-by: Leila Lin <leilacy_lin@compal.corp-partner.google.com>
Signed-off-by: Logan_Liao <Logan_liao@compal.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/4179444
Tested-by: LeilaCY Lin <leilacy_lin@compal.corp-partner.google.com.test-google-a.com>
Commit-Queue: LeilaCY Lin <leilacy_lin@compal.corp-partner.google.com.test-google-a.com>
Reviewed-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com>
Reviewed-by: Kyle Lin <kylelinck@google.com>

1 files changed, 7 insertions, 32 deletions

diff --git a/board/omnigul/board.h b/board/omnigul/board.h
index 2f260f88f8..34f91978ec 100644
--- a/board/omnigul/board.h
+++ b/board/omnigul/board.h
@@ -28,7 +28,7 @@
 
 /* LED */
 #define CONFIG_LED_PWM
-#define CONFIG_LED_PWM_COUNT 2
+#define CONFIG_LED_PWM_COUNT 1
 #undef CONFIG_LED_PWM_NEAR_FULL_COLOR
 #undef CONFIG_LED_PWM_SOC_ON_COLOR
 #undef CONFIG_LED_PWM_SOC_SUSPEND_COLOR
@@ -43,13 +43,6 @@
 #define CONFIG_ACCEL_LSM6DSO_INT_EVENT \
 	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
 
-/* TCS3400 ALS */
-#define CONFIG_ALS
-#define ALS_COUNT 1
-#define CONFIG_ALS_TCS3400
-#define CONFIG_ALS_TCS3400_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
-
 /* Enable sensor fifo, must also define the _SIZE and _THRES */
 #define CONFIG_ACCEL_FIFO
 /* FIFO size is in power of 2. */
@@ -57,9 +50,6 @@
 /* Depends on how fast the AP boots and typical ODRs */
 #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
 
-/* Sensors without hardware interrupt are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(CLEAR_ALS)
-
 /* Lid accel */
 #define CONFIG_LID_ANGLE
 #define CONFIG_LID_ANGLE_UPDATE
@@ -82,13 +72,14 @@
 
 #define CONFIG_IO_EXPANDER
 #define CONFIG_IO_EXPANDER_NCT38XX
-#define CONFIG_IO_EXPANDER_PORT_COUNT 2
+#define CONFIG_IO_EXPANDER_PORT_COUNT 1
 
 #define CONFIG_USB_PD_FRS_PPC
 
 #define CONFIG_USB_PD_TCPM_PS8815
 #define CONFIG_USB_PD_TCPM_PS8815_FORCE_DID
-#define CONFIG_USBC_RETIMER_INTEL_BB
+#undef CONFIG_USB_CHARGER
+#undef CONFIG_BC12_DETECT_PI3USB9201
 
 /* I2C speed console command */
 #define CONFIG_CMD_I2C_SPEED
@@ -153,16 +144,12 @@
 
 #define I2C_PORT_SENSOR NPCX_I2C_PORT0_0
 
-#define I2C_PORT_USB_C0_C2_TCPC NPCX_I2C_PORT1_0
+#define I2C_PORT_USB_C0_TCPC NPCX_I2C_PORT1_0
 #define I2C_PORT_USB_C1_TCPC NPCX_I2C_PORT4_1
 
-#define I2C_PORT_USB_C0_C2_PPC NPCX_I2C_PORT2_0
+#define I2C_PORT_USB_C0_PPC NPCX_I2C_PORT2_0
 #define I2C_PORT_USB_C1_PPC NPCX_I2C_PORT6_1
 
-#define I2C_PORT_USB_C0_C2_BC12 NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_C1_BC12 NPCX_I2C_PORT6_1
-
-#define I2C_PORT_USB_C0_C2_MUX NPCX_I2C_PORT3_0
 #define I2C_PORT_USB_C1_MUX NPCX_I2C_PORT6_1
 
 #define I2C_PORT_BATTERY NPCX_I2C_PORT5_0
@@ -200,7 +187,6 @@
 
 /* Charger defines */
 #define CONFIG_CHARGER_ISL9241
-#define CONFIG_CHARGE_RAMP_SW
 #define CONFIG_CHARGER_SENSE_RESISTOR 10
 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
 #undef CONFIG_CHARGER_INPUT_CURRENT_DERATE_PCT
@@ -222,7 +208,6 @@ enum adc_channel {
 	ADC_TEMP_SENSOR_1_DDR_SOC,
 	ADC_TEMP_SENSOR_2_AMBIENT,
 	ADC_TEMP_SENSOR_3_CHARGER,
-	ADC_TEMP_SENSOR_4_WWAN,
 	ADC_CH_COUNT
 };
 
@@ -230,18 +215,10 @@ enum temp_sensor_id {
 	TEMP_SENSOR_1_DDR_SOC,
 	TEMP_SENSOR_2_AMBIENT,
 	TEMP_SENSOR_3_CHARGER,
-	TEMP_SENSOR_4_WWAN,
 	TEMP_SENSOR_COUNT
 };
 
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	CLEAR_ALS,
-	RGB_ALS,
-	SENSOR_COUNT
-};
+enum sensor_id { LID_ACCEL = 0, BASE_ACCEL, BASE_GYRO, SENSOR_COUNT };
 
 enum ioex_port { IOEX_C0_NCT38XX = 0, IOEX_C2_NCT38XX, IOEX_PORT_COUNT };
 
@@ -249,11 +226,9 @@ enum battery_type { BATTERY_AP19B8M, BATTERY_AP20CBL, BATTERY_TYPE_COUNT };
 
 enum pwm_channel {
 	PWM_CH_LED2 = 0, /* PWM0 (white charger) */
-	PWM_CH_LED3, /* PWM1 (orange on DB) */
 	PWM_CH_LED1, /* PWM2 (orange charger) */
 	PWM_CH_KBLIGHT, /* PWM3 */
 	PWM_CH_FAN, /* PWM5 */
-	PWM_CH_LED4, /* PWM7 (white on DB) */
 	PWM_CH_COUNT
 };