pompom: Initial EC image

Create the initial EC image for the pompom variant by copying
the lazor reference board EC files into a new directory named for
the variant.

(Auto-Generated by create_initial_ec_image.sh version 1.0.3).

BUG=b:160105629
BRANCH=none
TEST=make BOARD=pompom

Signed-off-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
Change-Id: I1341f09bb8d48f0a8cc750906f36171f8ba0eaca
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2289470
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Wai-Hong Tam <waihong@google.com>
Commit-Queue: Bob Moragues <moragues@chromium.org>

1 files changed, 97 insertions, 0 deletions

diff --git a/board/pompom/board.h b/board/pompom/board.h
new file mode 100644
index 0000000000..fff40814b0
--- /dev/null
+++ b/board/pompom/board.h
@@ -0,0 +1,97 @@
+/* Copyright 2020 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Pompom board configuration */
+
+#ifndef __CROS_EC_BOARD_H
+#define __CROS_EC_BOARD_H
+
+#include "baseboard.h"
+
+/* TODO(waihong): Remove the following bringup features */
+#define CONFIG_BRINGUP
+#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands. */
+#define CONFIG_USB_PD_DEBUG_LEVEL 3
+#define CONFIG_CMD_AP_RESET_LOG
+#define CONFIG_CMD_GPIO_EXTENDED
+#define CONFIG_CMD_POWERINDEBUG
+#define CONFIG_I2C_DEBUG
+
+/* Internal SPI flash on NPCX7 */
+#define CONFIG_FLASH_SIZE (512 * 1024)  /* 512KB internal spi flash */
+
+/* BC 1.2 Charger */
+#define CONFIG_BC12_DETECT_PI3USB9201
+
+/* USB */
+#define CONFIG_USB_PD_TCPM_PS8751
+#define CONFIG_USBC_PPC_SN5S330
+
+/* USB-A */
+#define USB_PORT_COUNT 1
+#define CONFIG_USB_PORT_POWER_DUMB
+
+/* Sensors */
+/* BMI160 Base accel/gyro */
+#define CONFIG_ACCELGYRO_BMI160
+#define CONFIG_ACCEL_INTERRUPTS
+#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
+	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
+#define OPT3001_I2C_ADDR_FLAGS OPT3001_I2C_ADDR1_FLAGS
+
+/* BMA253 lid accel */
+#define CONFIG_ACCEL_BMA255
+#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
+
+#define CONFIG_LID_ANGLE
+#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
+#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
+#define CONFIG_LID_ANGLE_UPDATE
+
+#define CONFIG_TABLET_MODE
+#define CONFIG_TABLET_MODE_SWITCH
+#define CONFIG_GMR_TABLET_MODE
+#define GMR_TABLET_MODE_GPIO_L GPIO_LID_360_L
+
+#define GPIO_EC_RST_ODL GPIO_EC_RST_ODL_GPIO02
+#define GPIO_PM845_RESIN_L GPIO_PM7180_RESIN_D_L
+
+#ifndef __ASSEMBLER__
+
+#include "gpio_signal.h"
+#include "registers.h"
+
+enum adc_channel {
+	ADC_VBUS,
+	ADC_AMON_BMON,
+	ADC_PSYS,
+	ADC_CH_COUNT
+};
+
+/* Motion sensors */
+enum sensor_id {
+	LID_ACCEL = 0,
+	BASE_ACCEL,
+	BASE_GYRO,
+	SENSOR_COUNT,
+};
+
+enum pwm_channel {
+	PWM_CH_KBLIGHT = 0,
+	PWM_CH_DISPLIGHT,
+	PWM_CH_COUNT
+};
+
+/* Custom function to indicate if sourcing VBUS */
+int board_is_sourcing_vbus(int port);
+/* Enable VBUS sink for a given port */
+int board_vbus_sink_enable(int port, int enable);
+/* Reset all TCPCs. */
+void board_reset_pd_mcu(void);
+void board_set_tcpc_power_mode(int port, int mode);
+
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* __CROS_EC_BOARD_H */