Use 7bit I2C/SPI slave addresses in EC

Opt for 7bit slave addresses in EC code.  If 8bit is
expected by a driver, make it local and show this in
the naming.

Use __7b, __7bf and __8b as name extensions for i2c/spi
addresses used in the EC codebase.  __7b indicates a
7bit address by itself.  __7bf indicates a 7bit address
with optional flags attached.  __8b indicates a 8bit
address by itself.

Allow space for 10bit addresses, even though this is
not currently being used by any of our attached
devices.

These extensions are for verification purposes only and
will be removed in the last pass of this ticket. I want
to make sure the variable names reflect the type to help
eliminate future 7/8/7-flags confusion.

BUG=chromium:971296
BRANCH=none
TEST=make buildall -j

Change-Id: I2fc3d1b52ce76184492b2aaff3060f486ca45f45
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1699893
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>

1 files changed, 42 insertions, 41 deletions

diff --git a/board/poppy/board.c b/board/poppy/board.c
index cc26a6206d..90e56b6fa8 100644
--- a/board/poppy/board.c
+++ b/board/poppy/board.c
@@ -193,7 +193,7 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = {
 		.bus_type = EC_BUS_TYPE_I2C,
 		.i2c_info = {
 			.port = NPCX_I2C_PORT0_0,
-			.addr = ANX74XX_I2C_ADDR1,
+			.addr__7bf = ANX74XX_I2C_ADDR1__7bf,
 		},
 		.drv = &anx74xx_tcpm_drv,
 	},
@@ -201,7 +201,7 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = {
 		.bus_type = EC_BUS_TYPE_I2C,
 		.i2c_info = {
 			.port = NPCX_I2C_PORT0_0,
-			.addr = PS8751_I2C_ADDR1,
+			.addr__7bf = PS8751_I2C_ADDR1__7bf,
 		},
 		.drv = &ps8xxx_tcpm_drv,
 	},
@@ -291,7 +291,7 @@ void board_tcpc_init(void)
 	 *
 	 * NOTE: PS8751 A3 will wake on any I2C access.
 	 */
-	i2c_read8(NPCX_I2C_PORT0_1, 0x10, 0xA0, &reg);
+	i2c_read8__7bf(NPCX_I2C_PORT0_1, 0x08, 0xA0, &reg);
 
 	/* Enable TCPC interrupts */
 	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
@@ -358,7 +358,7 @@ static void board_report_pmic_fault(const char *str)
 	uint32_t info;
 
 	/* RESETIRQ1 -- Bit 4: VRFAULT */
-	if (i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x8, &vrfault)
+	if (i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x8, &vrfault)
 	    != EC_SUCCESS)
 		return;
 
@@ -368,19 +368,19 @@ static void board_report_pmic_fault(const char *str)
 	/* VRFAULT has occurred, print VRFAULT status bits. */
 
 	/* PWRSTAT1 */
-	i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x16, &pwrstat1);
+	i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x16, &pwrstat1);
 
 	/* PWRSTAT2 */
-	i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x17, &pwrstat2);
+	i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x17, &pwrstat2);
 
 	CPRINTS("PMIC VRFAULT: %s", str);
 	CPRINTS("PMIC VRFAULT: PWRSTAT1=0x%02x PWRSTAT2=0x%02x", pwrstat1,
 		pwrstat2);
 
 	/* Clear all faults -- Write 1 to clear. */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x8, BIT(4));
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x16, pwrstat1);
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x17, pwrstat2);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x8, BIT(4));
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x16, pwrstat1);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x17, pwrstat2);
 
 	/*
 	 * Status of the fault registers can be checked in the OS by looking at
@@ -399,7 +399,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10)  - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10)  - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x30, 0x3a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x30, 0x3a);
 
 	/*
 	 * V18ACNT:
@@ -408,7 +408,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10) - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x34, 0x2a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x34, 0x2a);
 
 	/*
 	 * V100ACNT:
@@ -417,7 +417,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10) - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x37, 0x1a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x37, 0x1a);
 
 	/*
 	 * V085ACNT:
@@ -426,7 +426,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10) - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x38, 0x3a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x38, 0x3a);
 }
 
 static void board_pmic_enable_slp_s0_vr_decay(void)
@@ -438,7 +438,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10)  - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10)  - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x30, 0x7a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x30, 0x7a);
 
 	/*
 	 * V18ACNT:
@@ -447,7 +447,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10) - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x34, 0x6a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x34, 0x6a);
 
 	/*
 	 * V100ACNT:
@@ -456,7 +456,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10) - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x37, 0x5a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x37, 0x5a);
 
 	/*
 	 * V085ACNT:
@@ -465,7 +465,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void)
 	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
 	 * Bits 1:0 (10) - VR set to AUTO operating mode
 	 */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x38, 0x7a);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x38, 0x7a);
 }
 
 void power_board_handle_host_sleep_event(enum host_sleep_event state)
@@ -484,15 +484,15 @@ static void board_pmic_init(void)
 		return;
 
 	/* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x3e, 0x04);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x3e, 0x04);
 
 	board_pmic_disable_slp_s0_vr_decay();
 
 	/* VRMODECTRL - disable low-power mode for all rails */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x3b, 0x1f);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x3b, 0x1f);
 
 	/* Disable power button shutdown timer. */
-	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x14, 0x00);
+	i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x14, 0x00);
 }
 DECLARE_DEFERRED(board_pmic_init);
 
@@ -652,23 +652,24 @@ void board_set_charge_limit(int port, int supplier, int charge_ma,
 
 void board_hibernate(void)
 {
-    CPRINTS("Triggering PMIC shutdown.");
-    uart_flush_output();
-
-    /* Trigger PMIC shutdown. */
-    if (i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x49, 0x01)) {
-        /*
-         * If we can't tell the PMIC to shutdown, instead reset
-         * and don't start the AP. Hopefully we'll be able to
-         * communicate with the PMIC next time.
-         */
-        CPRINTS("PMIC i2c failed.");
-        system_reset(SYSTEM_RESET_LEAVE_AP_OFF);
-    }
-
-    /* Await shutdown. */
-    while (1)
-        ;
+	CPRINTS("Triggering PMIC shutdown.");
+	uart_flush_output();
+
+	/* Trigger PMIC shutdown. */
+	if (i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf,
+		       0x49, 0x01)) {
+		/*
+		 * If we can't tell the PMIC to shutdown, instead reset
+		 * and don't start the AP. Hopefully we'll be able to
+		 * communicate with the PMIC next time.
+		 */
+		CPRINTS("PMIC i2c failed.");
+		system_reset(SYSTEM_RESET_LEAVE_AP_OFF);
+	}
+
+	/* Await shutdown. */
+	while (1)
+		;
 }
 
 int board_get_version(void)
@@ -750,7 +751,7 @@ struct motion_sensor_t motion_sensors[] = {
 	 .mutex = &g_lid_mutex,
 	 .drv_data = &g_bmi160_data,
 	 .port = I2C_PORT_GYRO,
-	 .addr = BMI160_ADDR0,
+	 .i2c_spi_addr__7bf = BMI160_ADDR0__7bf,
 	 .rot_standard_ref = &lid_standard_ref,
 	 .default_range = 2,  /* g, enough for laptop. */
 	 .min_frequency = BMI160_ACCEL_MIN_FREQ,
@@ -774,7 +775,7 @@ struct motion_sensor_t motion_sensors[] = {
 	 .mutex = &g_lid_mutex,
 	 .drv_data = &g_bmi160_data,
 	 .port = I2C_PORT_GYRO,
-	 .addr = BMI160_ADDR0,
+	 .i2c_spi_addr__7bf = BMI160_ADDR0__7bf,
 	 .default_range = 1000, /* dps */
 	 .rot_standard_ref = &lid_standard_ref,
 	 .min_frequency = BMI160_GYRO_MIN_FREQ,
@@ -791,7 +792,7 @@ struct motion_sensor_t motion_sensors[] = {
 	 .mutex = &g_lid_mutex,
 	 .drv_data = &g_bmi160_data,
 	 .port = I2C_PORT_GYRO,
-	 .addr = BMI160_ADDR0,
+	 .i2c_spi_addr__7bf = BMI160_ADDR0__7bf,
 	 .default_range = BIT(11), /* 16LSB / uT, fixed */
 	 .rot_standard_ref = &mag_standard_ref,
 	 .min_frequency = BMM150_MAG_MIN_FREQ,
@@ -806,7 +807,7 @@ struct motion_sensor_t motion_sensors[] = {
 	 .drv = &opt3001_drv,
 	 .drv_data = &g_opt3001_data,
 	 .port = I2C_PORT_ALS,
-	 .addr = OPT3001_I2C_ADDR,
+	 .i2c_spi_addr__7bf = OPT3001_I2C_ADDR__7bf,
 	 .rot_standard_ref = NULL,
 	 .default_range = 0x10000, /* scale = 1; uscale = 0 */
 	 .min_frequency = OPT3001_LIGHT_MIN_FREQ,