diff options
| author | Furquan Shaikh <furquan@google.com> | 2018-11-20 21:57:50 -0800 |
|---|---|---|
| committer | chrome-bot <chrome-bot@chromium.org> | 2018-11-29 04:31:49 -0800 |
| commit | 625a4d856d767c3226e6869f5d38ca3c70b2b95c (patch) | |
| tree | f96db72812182d06a46872c4139fc9ab791f2992 /board/rammus | |
| parent | fd6412f0ec89fd5570279d6081ae425107b3c9ea (diff) | |
| download | chrome-ec-625a4d856d767c3226e6869f5d38ca3c70b2b95c.tar.gz | |
tablet_mode: Introduce hall sensor specific handling
This change performs the following renaming:
1. CONFIG_TABLET_SWITCH -> CONFIG_HALL_SENSOR
Indicates if a device has hall sensor
2. TABLET_MODE_GPIO_L -> HALL_SENSOR_GPIO_L
Provides the interrupt line from hall sensor to EC.
3. tablet_mode_isr -> hall_sensor_isr
Interrupt routine that gets control on hall sensor interrupt.
4. tablet_mode_init -> hall_sensor_init
Init routine for initializing hall sensor interrupt.
5. tablet_switch_disable -> hall_sensor_disable
Disable hall sensor interrupt and tablet mode sub-system.
This is done to separate hall sensor interrupt from tablet mode
handling. It is another step towards aligning tablet mode detection on
EC with Chrome. Hall sensor interrupt occurs when the lid is in
360-degree flipped mode. If tablet mode is not already triggered by
lid motion driver, then hall_sensor_isr will set tablet mode and take
necessary actions to disable input peripherals.
CQ-DEPEND=CL:1351518
BUG=b:120050761
BRANCH=octopus
TEST=make -j buildall
Change-Id: I5841f6875d538a624cb888bc048f252397ab457c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1350469
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Diffstat (limited to 'board/rammus')
| -rw-r--r-- | board/rammus/board.h | 4 | ||||
| -rw-r--r-- | board/rammus/gpio.inc | 2 |
2 files changed, 3 insertions, 3 deletions
diff --git a/board/rammus/board.h b/board/rammus/board.h index 3dfd3e703a..22686ba34e 100644 --- a/board/rammus/board.h +++ b/board/rammus/board.h @@ -136,8 +136,8 @@ #define CONFIG_TABLET_MODE #define CONFIG_TABLET_MODE_SWITCH -#define CONFIG_TABLET_SWITCH -#define TABLET_MODE_GPIO_L GPIO_TABLET_MODE +#define CONFIG_HALL_SENSOR +#define HALL_SENSOR_GPIO_L GPIO_TABLET_MODE /* USB */ #define CONFIG_USB_CHARGER diff --git a/board/rammus/gpio.inc b/board/rammus/gpio.inc index b3f6e6ac97..9176414cfc 100644 --- a/board/rammus/gpio.inc +++ b/board/rammus/gpio.inc @@ -27,7 +27,7 @@ GPIO_INT(USB_C1_VBUS_DET_L, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, vbus1_ GPIO_INT(USB_C0_BC12_INT_L, PIN(D, 3), GPIO_INT_FALLING, usb0_evt) GPIO_INT(USB_C1_BC12_INT_L, PIN(3, 3), GPIO_INT_FALLING, usb1_evt) GPIO_INT(BASE_SIXAXIS_INT_L, PIN(7, 3), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt) -GPIO_INT(TABLET_MODE, PIN(C, 6), GPIO_INT_BOTH, tablet_mode_isr) +GPIO_INT(TABLET_MODE, PIN(C, 6), GPIO_INT_BOTH, hall_sensor_isr) GPIO(EN_PP3300_TRACKPAD, PIN(4, 5), GPIO_OUT_LOW) /* Enable TouchPad */ GPIO(PCH_RTCRST, PIN(8, 2), GPIO_OUT_LOW) /* RTCRST# to SOC */ |