diff options
author | Todd Broch <tbroch@chromium.org> | 2015-04-28 14:42:59 -0700 |
---|---|---|
committer | ChromeOS Commit Bot <chromeos-commit-bot@chromium.org> | 2015-04-30 02:31:18 +0000 |
commit | 63786f247e2f8a058465b75cd476ef0c7ec5979f (patch) | |
tree | 8c380b1dbf448fc70b159d9872329f1d0eabd6ae /board/samus_pd | |
parent | fab26ee8914ad9f111d982388aeec61c13d6b1c6 (diff) | |
download | chrome-ec-63786f247e2f8a058465b75cd476ef0c7ec5979f.tar.gz |
samus_pd: Request different DP pin modes including multi-function.
Previously samus_pd just picked pin mode E without regard to what the
UFP was requesting. This change surveys the UFP's DP pin capabilities
and then requests the appropriate pin config.
Additionally if the UFP supports multi-function and has preferred it
during the initial DP status message, samus will configure its
type-c mux in 'dock' mode.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:38728
TEST=manual,
1. hoho + samus, pin mode = 'C'
2. dingdong + samus, pin mode = 'E'.
3. apple type-C HDMI multiport + samus, pin mode = 'D' and USB device
enumerates as SuperSpeed.
4. plankton + samus w/ patch asserting alternate mode with
multi-function preferred sets config to 'F' now and only drives DP
out on 2 lanes w/ other two allowing USB key to be seen.
Change-Id: Ie4764c33f108e8a88f0052b64ddb96cb92e5a78b
Reviewed-on: https://chromium-review.googlesource.com/267796
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Diffstat (limited to 'board/samus_pd')
-rw-r--r-- | board/samus_pd/usb_pd_policy.c | 21 |
1 files changed, 17 insertions, 4 deletions
diff --git a/board/samus_pd/usb_pd_policy.c b/board/samus_pd/usb_pd_policy.c index 59530116c9..a8b1f1a4b5 100644 --- a/board/samus_pd/usb_pd_policy.c +++ b/board/samus_pd/usb_pd_policy.c @@ -259,12 +259,15 @@ int pd_custom_vdm(int port, int cnt, uint32_t *payload, } static int dp_flags[PD_PORT_COUNT]; +/* DP Status VDM as returned by UFP */ +static uint32_t dp_status[PD_PORT_COUNT]; static void svdm_safe_dp_mode(int port) { /* make DP interface safe until configure */ board_set_usb_mux(port, TYPEC_MUX_NONE, pd_get_polarity(port)); dp_flags[port] = 0; + dp_status[port] = 0; } static int svdm_enter_dp_mode(int port, uint32_t mode_caps) @@ -297,10 +300,18 @@ static int svdm_dp_status(int port, uint32_t *payload) static int svdm_dp_config(int port, uint32_t *payload) { int opos = pd_alt_mode(port, USB_SID_DISPLAYPORT); - board_set_usb_mux(port, TYPEC_MUX_DP, pd_get_polarity(port)); + int mf_pref = PD_VDO_DPSTS_MF_PREF(dp_status[port]); + int pin_mode = pd_dfp_dp_get_pin_mode(port, dp_status[port]); + + if (!pin_mode) + return 0; + + board_set_usb_mux(port, mf_pref ? TYPEC_MUX_DOCK : TYPEC_MUX_DP, + pd_get_polarity(port)); + payload[0] = VDO(USB_SID_DISPLAYPORT, 1, CMD_DP_CONFIG | VDO_OPOS(opos)); - payload[1] = VDO_DP_CFG(MODE_DP_PIN_E, /* UFP_U as UFP_D */ + payload[1] = VDO_DP_CFG(pin_mode, /* UFP_U as UFP_D */ 0, /* UFP_U as DFP_D */ 1, /* DPv1.3 signaling */ 2); /* UFP_U connected as UFP_D */ @@ -335,11 +346,13 @@ DECLARE_DEFERRED(hpd1_irq_deferred); static int svdm_dp_attention(int port, uint32_t *payload) { int cur_lvl; - int lvl = PD_VDO_HPD_LVL(payload[1]); - int irq = PD_VDO_HPD_IRQ(payload[1]); + int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); + int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); enum gpio_signal hpd = PORT_TO_HPD(port); cur_lvl = gpio_get_level(hpd); + dp_status[port] = payload[1]; + /* Its initial DP status message prior to config */ if (!(dp_flags[port] & DP_FLAGS_DP_ON)) { if (lvl) |