ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

1 files changed, 0 insertions, 375 deletions

diff --git a/board/sasukette/board.c b/board/sasukette/board.c
deleted file mode 100644
index a55967d816..0000000000
--- a/board/sasukette/board.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Sasukette configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "cbi_fw_config.h"
-#include "cros_board_info.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "math_util.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/retimer/tusb544.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "driver/tcpm/raa489000.h"
-#include "driver/usb_mux/it5205.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "intc.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "tcpm/tcpci.h"
-#include "temp_sensor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-
-#define INT_RECHECK_US 5000
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void check_c0_line(void);
-DECLARE_DEFERRED(check_c0_line);
-
-static void notify_c0_chips(void)
-{
-	schedule_deferred_pd_interrupt(0);
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void check_c0_line(void)
-{
-	/*
-	 * If line is still being held low, see if there's more to process from
-	 * one of the chips
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		notify_c0_chips();
-		hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-	}
-}
-
-static void usb_c0_interrupt(enum gpio_signal s)
-{
-	/* Cancel any previous calls to check the interrupt line */
-	hook_call_deferred(&check_c0_line_data, -1);
-
-	/* Notify all chips using this line that an interrupt came in */
-	notify_c0_chips();
-
-	/* Check the line again in 5ms */
-	hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-}
-
-static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
-{
-	cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
-	pd_handle_cc_overvoltage(0);
-}
-
-/* Must come after other header files and interrupt handler declarations */
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_VSNS_PP3300_A] = {
-		.name = "PP3300_A_PGOOD",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH0
-	},
-	[ADC_TEMP_SENSOR_1] = {
-		.name = "TEMP_SENSOR1",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH2
-	},
-	[ADC_TEMP_SENSOR_2] = {
-		.name = "TEMP_SENSOR2",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH3
-	},
-	[ADC_TEMP_SENSOR_3] = {
-		.name = "TEMP_SENSOR3",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH15
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* BC 1.2 chips */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-		.flags = PI3USB9201_ALWAYS_POWERED,
-	}
-};
-
-int pd_snk_is_vbus_provided(int port)
-{
-	return pd_check_vbus_level(port, VBUS_PRESENT);
-}
-
-/* Charger chips */
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
-		.drv = &isl923x_drv,
-	}
-};
-
-/* TCPCs */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = RAA489000_TCPC0_I2C_FLAGS,
-		},
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-		.drv = &raa489000_tcpm_drv,
-	}
-};
-
-/* USB Muxes */
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS,
-		.driver = &it5205_usb_mux_driver,
-	}
-};
-
-static uint32_t board_id;
-
-void board_init(void)
-{
-	int on;
-
-	gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
-
-	/*
-	 * If interrupt lines are already low, schedule them to be processed
-	 * after inits are completed.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL))
-		hook_call_deferred(&check_c0_line_data, 0);
-
-	gpio_enable_interrupt(GPIO_USB_C0_CCSBU_OVP_ODL);
-
-	/* Turn on 5V if the system is on, otherwise turn it off */
-	on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND |
-			      CHIPSET_STATE_SOFT_OFF);
-	board_power_5v_enable(on);
-
-	/* modify AC DC prochot value */
-	isl923x_set_ac_prochot(CHARGER_SOLO, 4096);
-	isl923x_set_dc_prochot(CHARGER_SOLO, 6000);
-
-	cbi_get_board_version(&board_id);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_hibernate(void)
-{
-	/*
-	 * Put all charger ICs present into low power mode before entering
-	 * z-state.
-	 *
-	 * b:186335659: In order to solve the power consumption problem of
-	 * hibernate，HW solution is adopted after board id 3 to solve the
-	 * problem that AC cannot wake up hibernate mode.
-	 */
-	if (board_id > 2)
-		raa489000_hibernate(0, true);
-	else
-		raa489000_hibernate(0, false);
-}
-
-__override void board_pulse_entering_rw(void)
-{
-	/*
-	 * On the ITE variants, the EC_ENTERING_RW signal was connected to a pin
-	 * which is active high by default.  This causes Cr50 to think that the
-	 * EC has jumped to its RW image even though this may not be the case.
-	 * The pin is changed to GPIO_EC_ENTERING_RW2.
-	 */
-	gpio_set_level(GPIO_EC_ENTERING_RW, 1);
-	gpio_set_level(GPIO_EC_ENTERING_RW2, 1);
-	usleep(MSEC);
-	gpio_set_level(GPIO_EC_ENTERING_RW, 0);
-	gpio_set_level(GPIO_EC_ENTERING_RW2, 0);
-}
-
-void board_reset_pd_mcu(void)
-{
-}
-
-__override void board_power_5v_enable(int enable)
-{
-	/*
-	 * Motherboard has a GPIO to turn on the 5V regulator, but the sub-board
-	 * sets it through the charger GPIO.
-	 */
-	gpio_set_level(GPIO_EN_PP5000, !!enable);
-	gpio_set_level(GPIO_EN_USB_A0_VBUS, !!enable);
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-	int regval;
-
-	/*
-	 * The interrupt line is shared between the TCPC and BC1.2 detector IC.
-	 * Therefore, go out and actually read the alert registers to report the
-	 * alert status.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
-			if (regval)
-				status = PD_STATUS_TCPC_ALERT_0;
-		}
-	}
-
-	return status;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma,
-			    int charge_mv)
-{
-	int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
-	/*
-	 * b/147463641: The charger IC seems to overdraw ~4%, therefore we
-	 * reduce our target accordingly.
-	 */
-	icl = icl * 96 / 100;
-	charge_set_input_current_limit(icl, charge_mv);
-}
-
-int board_is_sourcing_vbus(int port)
-{
-	int regval;
-
-	tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
-	return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_real_port = (port >= 0 &&
-			    port < board_get_usb_pd_port_count());
-	int i;
-	int old_port;
-
-	if (!is_real_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	old_port = charge_manager_get_active_charge_port();
-
-	CPRINTS("New chg p%d", port);
-
-	/* Disable all ports. */
-	if (port == CHARGE_PORT_NONE) {
-		for (i = 0; i < board_get_usb_pd_port_count(); i++) {
-			tcpc_write(i, TCPC_REG_COMMAND,
-				   TCPC_REG_COMMAND_SNK_CTRL_LOW);
-			raa489000_enable_asgate(i, false);
-		}
-
-		return EC_SUCCESS;
-	}
-
-	/* Check if port is sourcing VBUS. */
-	if (board_is_sourcing_vbus(port)) {
-		CPRINTS("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	/*
-	 * Turn off the other ports sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < board_get_usb_pd_port_count(); i++) {
-		if (i == port)
-			continue;
-
-		if (tcpc_write(i, TCPC_REG_COMMAND,
-			       TCPC_REG_COMMAND_SNK_CTRL_LOW))
-			CPRINTS("p%d: sink path disable failed.", i);
-		raa489000_enable_asgate(i, false);
-	}
-
-	/*
-	 * Stop the charger IC from switching while changing ports.  Otherwise,
-	 * we can overcurrent the adapter we're switching to. (crbug.com/926056)
-	 */
-	if (old_port != CHARGE_PORT_NONE)
-		charger_discharge_on_ac(1);
-
-	/* Enable requested charge port. */
-	if (raa489000_enable_asgate(port, true) ||
-	    tcpc_write(port, TCPC_REG_COMMAND,
-		       TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
-		CPRINTS("p%d: sink path enable failed.", port);
-		charger_discharge_on_ac(0);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	/* Allow the charger IC to begin/continue switching. */
-	charger_discharge_on_ac(0);
-
-	return EC_SUCCESS;
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	if (port < 0 || port > board_get_usb_pd_port_count())
-		return;
-	raa489000_set_output_current(port, rp);
-}
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1] = {.name = "Memory",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_1},
-	[TEMP_SENSOR_2] = {.name = "Ambient",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_2},
-	[TEMP_SENSOR_3] = {.name = "Cpu",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_3},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);