Sasukette: Initial EC image

Initial EC image for Sasukette
    1. Only One typeC port
    2. Have no motionsense

BUG=b:177193132
BRANCH=dedede
TEST=make BOARD=sasukette pass
boot device successfully

Signed-off-by: Mike Lee <mike5@huaqin.corp-partner.google.com>
Change-Id: I53116d7bbc29f7cc13bdb51676cd88cf379ddd22
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2652827
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>

1 files changed, 28 insertions, 81 deletions

diff --git a/board/sasukette/board.h b/board/sasukette/board.h
index f40e111608..06589283dc 100644
--- a/board/sasukette/board.h
+++ b/board/sasukette/board.h
@@ -3,7 +3,7 @@
  * found in the LICENSE file.
  */
 
-/* Waddledee board configuration */
+/* Sasukette board configuration */
 
 #ifndef __CROS_EC_BOARD_H
 #define __CROS_EC_BOARD_H
@@ -11,10 +11,15 @@
 /* Select Baseboard features */
 #define VARIANT_DEDEDE_EC_IT8320
 #include "baseboard.h"
+#undef GPIO_VOLUME_UP_L
+#undef GPIO_VOLUME_DOWN_L
+#undef CONFIG_VOLUME_BUTTONS
 
 /* System unlocked in early development */
 #define CONFIG_SYSTEM_UNLOCKED
 
+/* EC console commands */
+#define CONFIG_CMD_TCPC_DUMP
 #define CONFIG_CMD_CHARGER_DUMP
 
 /* Battery */
@@ -24,55 +29,29 @@
 #define CONFIG_BC12_DETECT_PI3USB9201
 
 /* Charger */
-#define CONFIG_CHARGER_SM5803		/* C0 and C1: Charger */
-#define CONFIG_USB_PD_VBUS_DETECT_CHARGER
-#define CONFIG_USB_PD_5V_CHARGER_CTRL
-#define CONFIG_CHARGER_OTG
-#undef  CONFIG_CHARGER_SINGLE_CHIP
-#define CONFIG_OCPC
-#define CONFIG_OCPC_DEF_RBATT_MOHMS 21 /* R_DS(on) 10.7mOhm + 10mOhm sns rstr */
-
-/*
- * GPIO for C1 interrupts, for baseboard use
- *
- * Note this will only be valid for board revision 1
- */
-#define GPIO_USB_C1_INT_ODL GPIO_USB_C1_INT_V1_ODL
+#define CONFIG_CHARGER_RAA489000
+#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
+#define CONFIG_CHARGER_SENSE_RESISTOR 10
+#define  CONFIG_CHARGER_SINGLE_CHIP
 
 /* LED */
-#define CONFIG_LED_PWM
-#define CONFIG_LED_PWM_COUNT 1
-
-/* PWM */
-#define CONFIG_PWM
-
-/* Sensors */
-#define CONFIG_ACCEL_KX022		/* Lid accel */
-#define CONFIG_ACCELGYRO_LSM6DSM	/* Base accel */
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-#define CONFIG_ACCEL_INTERRUPTS
-/* Enable sensor fifo, must also define the _SIZE and _THRES */
-#define CONFIG_ACCEL_FIFO
-/* Power of 2 - Too large of a fifo causes too much timestamp jitter */
-#define CONFIG_ACCEL_FIFO_SIZE 256
-#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-#define CONFIG_TABLET_MODE
-#define CONFIG_TABLET_MODE_SWITCH
-#define CONFIG_GMR_TABLET_MODE
+#define CONFIG_LED_COMMON
+#define CONFIG_LED_ONOFF_STATES
+#define CONFIG_LED_POWER_LED
+#define GPIO_BAT_LED_RED_L GPIO_LED_R_ODL
+#define GPIO_BAT_LED_GREEN_L GPIO_LED_G_ODL
+#define GPIO_PWR_LED_BLUE_L GPIO_LED_B_ODL
 
 /* TCPC */
-#define CONFIG_USB_PD_PORT_MAX_COUNT 2
-#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP	/* C0: ITE EC TCPC */
-#define CONFIG_USB_PD_TCPM_ANX7447	/* C1: ANX TCPC + Mux */
-#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 1
+#define CONFIG_USB_PD_PORT_MAX_COUNT 1
+#define CONFIG_USB_PD_TCPM_RAA489000
+
+/* USB defines specific to external TCPCs */
+#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
+#define CONFIG_USB_PD_VBUS_DETECT_TCPC
+#define CONFIG_USB_PD_DISCHARGE_TCPC
+#define CONFIG_USB_PD_TCPC_LOW_POWER
+#define CONFIG_USB_PD_5V_EN_CUSTOM
 
 /* Thermistors */
 #define CONFIG_TEMP_SENSOR
@@ -84,62 +63,30 @@
 #define CONFIG_USB_MUX_IT5205			/* C1: ITE Mux */
 #define I2C_PORT_USB_MUX I2C_PORT_USB_C0	/* Required for ITE Mux */
 
-#define CONFIG_USBC_RETIMER_TUSB544		/* C1 Redriver: TUSB544 */
-
 #ifndef __ASSEMBLER__
 
 #include "gpio_signal.h"
 #include "registers.h"
 
-enum chg_id {
-	CHARGER_PRIMARY,
-	CHARGER_SECONDARY,
-	CHARGER_NUM,
-};
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT,
-	PWM_CH_LED_RED,
-	PWM_CH_LED_GREEN,
-	PWM_CH_LED_BLUE,
-	PWM_CH_COUNT,
-};
-
-/* Motion sensors */
-enum sensor_id {
-	LID_ACCEL,
-	BASE_ACCEL,
-	BASE_GYRO,
-	SENSOR_COUNT
-};
-
 /* ADC channels */
 enum adc_channel {
 	ADC_VSNS_PP3300_A,     /* ADC0 */
 	ADC_TEMP_SENSOR_1,     /* ADC2 */
 	ADC_TEMP_SENSOR_2,     /* ADC3 */
-	ADC_SUB_ANALOG,        /* ADC13 */
+	ADC_TEMP_SENSOR_3,     /* ADC15*/
 	ADC_CH_COUNT
 };
 
 enum temp_sensor_id {
 	TEMP_SENSOR_1,
 	TEMP_SENSOR_2,
+	TEMP_SENSOR_3,
 	TEMP_SENSOR_COUNT
 };
 
 /* List of possible batteries */
 enum battery_type {
-	BATTERY_LGC15,
-	BATTERY_PANASONIC_AP15O5L,
-	BATTERY_SANYO,
-	BATTERY_SONY,
-	BATTERY_SMP_AP13J7K,
-	BATTERY_PANASONIC_AC15A3J,
-	BATTERY_LGC_AP18C8K,
-	BATTERY_MURATA_AP18C4K,
-	BATTERY_LGC_AP19A8K,
-	BATTERY_LGC_G023,
+	BATTERY_SDI,
 	BATTERY_TYPE_COUNT,
 };