ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

11 files changed, 0 insertions, 1115 deletions

diff --git a/board/sasukette/battery.c b/board/sasukette/battery.c
deleted file mode 100644
index 652c04a651..0000000000
--- a/board/sasukette/battery.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery.h"
-#include "battery_fuel_gauge.h"
-#include "battery_smart.h"
-#include "charge_state.h"
-#include "common.h"
-#include "util.h"
-
-#define CHARGING_VOLTAGE_MV_SAFE        8400
-#define CHARGING_CURRENT_MA_SAFE        1500
-
-/*
- * Battery info for all sasukette battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* SDI Battery Information */
-	[BATTERY_SDI] = {
-		.fuel_gauge = {
-			.manuf_name = "SDI",
-			.device_name = "4402D51",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.mfgacc_support = 0,
-				.reg_addr = 0x00,
-				.reg_mask = 0xc000,
-				.disconnect_val = 0x8000,
-				.cfet_mask = 0xc000,
-				.cfet_off_val = 0x2000,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= 8800,
-			.voltage_normal		= 7700, /* mV */
-			.voltage_min		= 6000, /* mV */
-			.precharge_current	= 200,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 45,
-			.charging_min_c		= 0,
-			.charging_max_c		= 50,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 70,
-		},
-	}
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SDI;
-
-int charger_profile_override(struct charge_state_data *curr)
-{
-	int current;
-	int voltage;
-	/* battery temp in 0.1 deg C */
-	int bat_temp_c;
-	const struct battery_info *batt_info;
-
-	/*
-	 * Keep track of battery temperature range:
-	 *
-	 *     ZONE_0  ZONE_1   ZONE_2  ZONE_3
-	 * ---+------+--------+--------+------+--- Temperature (C)
-	 *    0      5        12       45     50
-	 */
-	enum {
-		TEMP_ZONE_0, /* 0 <= bat_temp_c <= 5 */
-		TEMP_ZONE_1, /* 5 < bat_temp_c <= 12 */
-		TEMP_ZONE_2, /* 12 < bat_temp_c <= 45 */
-		TEMP_ZONE_3, /* 45 < bat_temp_c <= 50 */
-		TEMP_ZONE_COUNT,
-		TEMP_OUT_OF_RANGE = TEMP_ZONE_COUNT
-	} temp_zone;
-
-	/*
-	 * Precharge must be executed when communication is failed on
-	 * dead battery.
-	 */
-	if (!(curr->batt.flags & BATT_FLAG_RESPONSIVE))
-		return 0;
-
-	current = curr->requested_current;
-	voltage = curr->requested_voltage;
-	bat_temp_c = curr->batt.temperature - 2731;
-	batt_info = battery_get_info();
-
-	/*
-	 * If the temperature reading is bad, assume the temperature
-	 * is out of allowable range.
-	 */
-	if ((curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE) ||
-	    (bat_temp_c < 0) || (bat_temp_c > 500))
-		temp_zone = TEMP_OUT_OF_RANGE;
-	else if (bat_temp_c <= 50)
-		temp_zone = TEMP_ZONE_0;
-	else if (bat_temp_c <= 120)
-		temp_zone = TEMP_ZONE_1;
-	else if (bat_temp_c <= 450)
-		temp_zone = TEMP_ZONE_2;
-	else
-		temp_zone = TEMP_ZONE_3;
-
-	switch (temp_zone) {
-	case TEMP_ZONE_0:
-		voltage = CHARGING_VOLTAGE_MV_SAFE;
-		current = CHARGING_CURRENT_MA_SAFE;
-		break;
-
-	case TEMP_ZONE_1:
-		voltage += 100;
-		current = CHARGING_CURRENT_MA_SAFE;
-		break;
-
-	case TEMP_ZONE_2:
-		voltage += 100;
-		break;
-
-	case TEMP_ZONE_3:
-		voltage = CHARGING_VOLTAGE_MV_SAFE;
-		break;
-
-	case TEMP_OUT_OF_RANGE:
-		/* Don't charge if outside of allowable temperature range */
-		current = 0;
-		voltage = 0;
-		curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE;
-		if (curr->state != ST_DISCHARGE)
-			curr->state = ST_IDLE;
-		break;
-	}
-
-	if (voltage > batt_info->voltage_max)
-		voltage = batt_info->voltage_max;
-
-	curr->requested_voltage = voltage;
-	curr->requested_current = MIN(curr->requested_current, current);
-
-	return 0;
-}
-
-enum ec_status charger_profile_override_get_param(uint32_t param,
-				uint32_t *value)
-{
-	return EC_RES_INVALID_PARAM;
-}
-
-enum ec_status charger_profile_override_set_param(uint32_t param,
-				uint32_t value)
-{
-	return EC_RES_INVALID_PARAM;
-}
diff --git a/board/sasukette/board.c b/board/sasukette/board.c
deleted file mode 100644
index a55967d816..0000000000
--- a/board/sasukette/board.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Sasukette configuration */
-
-#include "adc_chip.h"
-#include "button.h"
-#include "cbi_fw_config.h"
-#include "cros_board_info.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "math_util.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/retimer/tusb544.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "driver/tcpm/raa489000.h"
-#include "driver/usb_mux/it5205.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "intc.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "tcpm/tcpci.h"
-#include "temp_sensor.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpm.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-
-#define INT_RECHECK_US 5000
-
-/* C0 interrupt line shared by BC 1.2 and charger */
-static void check_c0_line(void);
-DECLARE_DEFERRED(check_c0_line);
-
-static void notify_c0_chips(void)
-{
-	schedule_deferred_pd_interrupt(0);
-	task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-static void check_c0_line(void)
-{
-	/*
-	 * If line is still being held low, see if there's more to process from
-	 * one of the chips
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		notify_c0_chips();
-		hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-	}
-}
-
-static void usb_c0_interrupt(enum gpio_signal s)
-{
-	/* Cancel any previous calls to check the interrupt line */
-	hook_call_deferred(&check_c0_line_data, -1);
-
-	/* Notify all chips using this line that an interrupt came in */
-	notify_c0_chips();
-
-	/* Check the line again in 5ms */
-	hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
-}
-
-static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
-{
-	cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
-	pd_handle_cc_overvoltage(0);
-}
-
-/* Must come after other header files and interrupt handler declarations */
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_VSNS_PP3300_A] = {
-		.name = "PP3300_A_PGOOD",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH0
-	},
-	[ADC_TEMP_SENSOR_1] = {
-		.name = "TEMP_SENSOR1",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH2
-	},
-	[ADC_TEMP_SENSOR_2] = {
-		.name = "TEMP_SENSOR2",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH3
-	},
-	[ADC_TEMP_SENSOR_3] = {
-		.name = "TEMP_SENSOR3",
-		.factor_mul = ADC_MAX_MVOLT,
-		.factor_div = ADC_READ_MAX + 1,
-		.shift = 0,
-		.channel = CHIP_ADC_CH15
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* BC 1.2 chips */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-		.flags = PI3USB9201_ALWAYS_POWERED,
-	}
-};
-
-int pd_snk_is_vbus_provided(int port)
-{
-	return pd_check_vbus_level(port, VBUS_PRESENT);
-}
-
-/* Charger chips */
-const struct charger_config_t chg_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
-		.drv = &isl923x_drv,
-	}
-};
-
-/* TCPCs */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = RAA489000_TCPC0_I2C_FLAGS,
-		},
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-		.drv = &raa489000_tcpm_drv,
-	}
-};
-
-/* USB Muxes */
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.usb_port = 0,
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS,
-		.driver = &it5205_usb_mux_driver,
-	}
-};
-
-static uint32_t board_id;
-
-void board_init(void)
-{
-	int on;
-
-	gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
-
-	/*
-	 * If interrupt lines are already low, schedule them to be processed
-	 * after inits are completed.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL))
-		hook_call_deferred(&check_c0_line_data, 0);
-
-	gpio_enable_interrupt(GPIO_USB_C0_CCSBU_OVP_ODL);
-
-	/* Turn on 5V if the system is on, otherwise turn it off */
-	on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND |
-			      CHIPSET_STATE_SOFT_OFF);
-	board_power_5v_enable(on);
-
-	/* modify AC DC prochot value */
-	isl923x_set_ac_prochot(CHARGER_SOLO, 4096);
-	isl923x_set_dc_prochot(CHARGER_SOLO, 6000);
-
-	cbi_get_board_version(&board_id);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-void board_hibernate(void)
-{
-	/*
-	 * Put all charger ICs present into low power mode before entering
-	 * z-state.
-	 *
-	 * b:186335659: In order to solve the power consumption problem of
-	 * hibernate，HW solution is adopted after board id 3 to solve the
-	 * problem that AC cannot wake up hibernate mode.
-	 */
-	if (board_id > 2)
-		raa489000_hibernate(0, true);
-	else
-		raa489000_hibernate(0, false);
-}
-
-__override void board_pulse_entering_rw(void)
-{
-	/*
-	 * On the ITE variants, the EC_ENTERING_RW signal was connected to a pin
-	 * which is active high by default.  This causes Cr50 to think that the
-	 * EC has jumped to its RW image even though this may not be the case.
-	 * The pin is changed to GPIO_EC_ENTERING_RW2.
-	 */
-	gpio_set_level(GPIO_EC_ENTERING_RW, 1);
-	gpio_set_level(GPIO_EC_ENTERING_RW2, 1);
-	usleep(MSEC);
-	gpio_set_level(GPIO_EC_ENTERING_RW, 0);
-	gpio_set_level(GPIO_EC_ENTERING_RW2, 0);
-}
-
-void board_reset_pd_mcu(void)
-{
-}
-
-__override void board_power_5v_enable(int enable)
-{
-	/*
-	 * Motherboard has a GPIO to turn on the 5V regulator, but the sub-board
-	 * sets it through the charger GPIO.
-	 */
-	gpio_set_level(GPIO_EN_PP5000, !!enable);
-	gpio_set_level(GPIO_EN_USB_A0_VBUS, !!enable);
-}
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-	int regval;
-
-	/*
-	 * The interrupt line is shared between the TCPC and BC1.2 detector IC.
-	 * Therefore, go out and actually read the alert registers to report the
-	 * alert status.
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
-		if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
-			if (regval)
-				status = PD_STATUS_TCPC_ALERT_0;
-		}
-	}
-
-	return status;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma,
-			    int charge_mv)
-{
-	int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
-	/*
-	 * b/147463641: The charger IC seems to overdraw ~4%, therefore we
-	 * reduce our target accordingly.
-	 */
-	icl = icl * 96 / 100;
-	charge_set_input_current_limit(icl, charge_mv);
-}
-
-int board_is_sourcing_vbus(int port)
-{
-	int regval;
-
-	tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
-	return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_real_port = (port >= 0 &&
-			    port < board_get_usb_pd_port_count());
-	int i;
-	int old_port;
-
-	if (!is_real_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	old_port = charge_manager_get_active_charge_port();
-
-	CPRINTS("New chg p%d", port);
-
-	/* Disable all ports. */
-	if (port == CHARGE_PORT_NONE) {
-		for (i = 0; i < board_get_usb_pd_port_count(); i++) {
-			tcpc_write(i, TCPC_REG_COMMAND,
-				   TCPC_REG_COMMAND_SNK_CTRL_LOW);
-			raa489000_enable_asgate(i, false);
-		}
-
-		return EC_SUCCESS;
-	}
-
-	/* Check if port is sourcing VBUS. */
-	if (board_is_sourcing_vbus(port)) {
-		CPRINTS("Skip enable p%d", port);
-		return EC_ERROR_INVAL;
-	}
-
-	/*
-	 * Turn off the other ports sink path FETs, before enabling the
-	 * requested charge port.
-	 */
-	for (i = 0; i < board_get_usb_pd_port_count(); i++) {
-		if (i == port)
-			continue;
-
-		if (tcpc_write(i, TCPC_REG_COMMAND,
-			       TCPC_REG_COMMAND_SNK_CTRL_LOW))
-			CPRINTS("p%d: sink path disable failed.", i);
-		raa489000_enable_asgate(i, false);
-	}
-
-	/*
-	 * Stop the charger IC from switching while changing ports.  Otherwise,
-	 * we can overcurrent the adapter we're switching to. (crbug.com/926056)
-	 */
-	if (old_port != CHARGE_PORT_NONE)
-		charger_discharge_on_ac(1);
-
-	/* Enable requested charge port. */
-	if (raa489000_enable_asgate(port, true) ||
-	    tcpc_write(port, TCPC_REG_COMMAND,
-		       TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
-		CPRINTS("p%d: sink path enable failed.", port);
-		charger_discharge_on_ac(0);
-		return EC_ERROR_UNKNOWN;
-	}
-
-	/* Allow the charger IC to begin/continue switching. */
-	charger_discharge_on_ac(0);
-
-	return EC_SUCCESS;
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	if (port < 0 || port > board_get_usb_pd_port_count())
-		return;
-	raa489000_set_output_current(port, rp);
-}
-
-/* Thermistors */
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_1] = {.name = "Memory",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_1},
-	[TEMP_SENSOR_2] = {.name = "Ambient",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_2},
-	[TEMP_SENSOR_3] = {.name = "Cpu",
-			   .type = TEMP_SENSOR_TYPE_BOARD,
-			   .read = get_temp_3v3_51k1_47k_4050b,
-			   .idx = ADC_TEMP_SENSOR_3},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
diff --git a/board/sasukette/board.h b/board/sasukette/board.h
deleted file mode 100644
index a1d987aaf3..0000000000
--- a/board/sasukette/board.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Sasukette board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Select Baseboard features */
-#define VARIANT_DEDEDE_EC_IT8320
-#include "baseboard.h"
-#undef GPIO_VOLUME_UP_L
-#undef GPIO_VOLUME_DOWN_L
-#undef CONFIG_VOLUME_BUTTONS
-#undef CONFIG_I2C_DEBUG
-
-/* EC console commands */
-#define CONFIG_CMD_TCPC_DUMP
-#define CONFIG_CMD_CHARGER_DUMP
-
-/* Battery */
-#define CONFIG_BATTERY_FUEL_GAUGE
-#define CONFIG_BATTERY_CHECK_CHARGE_TEMP_LIMITS
-
-/* BC 1.2 */
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/* Charger */
-#define CONFIG_CHARGER_RAA489000
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
-#define CONFIG_CHARGER_SENSE_RESISTOR 10
-#define CONFIG_CHARGER_SINGLE_CHIP
-#define CONFIG_CHARGER_PROFILE_OVERRIDE
-#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
-#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC)
-
-/* LED */
-#define CONFIG_LED_COMMON
-#define CONFIG_LED_ONOFF_STATES
-#define GPIO_BAT_LED_RED_L GPIO_LED_R_ODL
-#define GPIO_BAT_LED_GREEN_L GPIO_LED_G_ODL
-#define GPIO_PWR_LED_BLUE_L GPIO_LED_B_ODL
-
-/* TCPC */
-#define CONFIG_USB_PD_PORT_MAX_COUNT 1
-#define CONFIG_USB_PD_TCPM_RAA489000
-
-/* USB defines specific to external TCPCs */
-#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-#define CONFIG_USB_PD_VBUS_DETECT_TCPC
-#define CONFIG_USB_PD_DISCHARGE_TCPC
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-#define CONFIG_USB_PD_5V_EN_CUSTOM
-
-/* Thermistors */
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THERMISTOR
-#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
-
-/* USB Mux and Retimer */
-#define CONFIG_USB_MUX_IT5205			/* C1: ITE Mux */
-#define I2C_PORT_USB_MUX I2C_PORT_USB_C0	/* Required for ITE Mux */
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-/* ADC channels */
-enum adc_channel {
-	ADC_VSNS_PP3300_A,     /* ADC0 */
-	ADC_TEMP_SENSOR_1,     /* ADC2 */
-	ADC_TEMP_SENSOR_2,     /* ADC3 */
-	ADC_TEMP_SENSOR_3,     /* ADC15*/
-	ADC_CH_COUNT
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_1,
-	TEMP_SENSOR_2,
-	TEMP_SENSOR_3,
-	TEMP_SENSOR_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
-	BATTERY_SDI,
-	BATTERY_TYPE_COUNT,
-};
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/sasukette/build.mk b/board/sasukette/build.mk
deleted file mode 100644
index 8167ca9966..0000000000
--- a/board/sasukette/build.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- makefile -*-
-# Copyright 2021 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=it83xx
-CHIP_FAMILY:=it8320
-CHIP_VARIANT:=it8320dx
-BASEBOARD:=dedede
-
-board-y=board.o cbi_ssfc.o led.o usb_pd_policy.o
-board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/sasukette/cbi_ssfc.c b/board/sasukette/cbi_ssfc.c
deleted file mode 100644
index c4b859f133..0000000000
--- a/board/sasukette/cbi_ssfc.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "cbi_ssfc.h"
-#include "common.h"
-#include "console.h"
-#include "cros_board_info.h"
-#include "hooks.h"
-
-#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ##args)
-
-/* Cache SSFC on init since we don't expect it to change in runtime */
-static union dedede_cbi_ssfc cached_ssfc;
-BUILD_ASSERT(sizeof(cached_ssfc) == sizeof(uint32_t));
-
-static void cbi_ssfc_init(void)
-{
-	if (cbi_get_ssfc(&cached_ssfc.raw_value) != EC_SUCCESS)
-		/* Default to 0 when CBI isn't populated */
-		cached_ssfc.raw_value = 0;
-
-	CPRINTS("Read CBI SSFC : 0x%04X", cached_ssfc.raw_value);
-}
-DECLARE_HOOK(HOOK_INIT, cbi_ssfc_init, HOOK_PRIO_FIRST);
-
-enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void)
-{
-	return (enum ec_ssfc_base_sensor) cached_ssfc.base_sensor;
-}
-
-enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void)
-{
-	return (enum ec_ssfc_lid_sensor) cached_ssfc.lid_sensor;
-}
diff --git a/board/sasukette/cbi_ssfc.h b/board/sasukette/cbi_ssfc.h
deleted file mode 100644
index 935049b6ae..0000000000
--- a/board/sasukette/cbi_ssfc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#ifndef _DEDEDE_CBI_SSFC__H_
-#define _DEDEDE_CBI_SSFC__H_
-
-#include "stdint.h"
-
-/****************************************************************************
- * Dedede CBI Second Source Factory Cache
- */
-
-/*
- * Base Sensor (Bits 0-2)
- */
-enum ec_ssfc_base_sensor {
-	SSFC_SENSOR_BASE_DEFAULT = 0,
-	SSFC_SENSOR_BMI160 = 1,
-	SSFC_SENSOR_ICM426XX = 2,
-	SSFC_SENSOR_LSM6DSM = 3,
-	SSFC_SENSOR_ICM42607 = 4
-};
-
-/*
- * Lid Sensor (Bits 3-5)
- */
-enum ec_ssfc_lid_sensor {
-	SSFC_SENSOR_LID_DEFAULT = 0,
-	SSFC_SENSOR_BMA255 = 1,
-	SSFC_SENSOR_KX022 = 2,
-	SSFC_SENSOR_LIS2DWL = 3
-};
-
-union dedede_cbi_ssfc {
-	struct {
-		uint32_t base_sensor : 3;
-		uint32_t lid_sensor : 3;
-		uint32_t reserved_2 : 26;
-	};
-	uint32_t raw_value;
-};
-
-/**
- * Get the Base sensor type from SSFC_CONFIG.
- *
- * @return the Base sensor board type.
- */
-enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void);
-
-/**
- * Get the Lid sensor type from SSFC_CONFIG.
- *
- * @return the Lid sensor board type.
- */
-enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void);
-
-
-#endif /* _DEDEDE_CBI_SSFC__H_ */
diff --git a/board/sasukette/ec.tasklist b/board/sasukette/ec.tasklist
deleted file mode 100644
index bb4d9c6a61..0000000000
--- a/board/sasukette/ec.tasklist
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, TRENTA_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, ULTRA_TASK_STACK_SIZE) \
-        TASK_ALWAYS(PD_C0, pd_task, NULL, ULTRA_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, ULTRA_TASK_STACK_SIZE)
diff --git a/board/sasukette/gpio.inc b/board/sasukette/gpio.inc
deleted file mode 100644
index 396a5595fa..0000000000
--- a/board/sasukette/gpio.inc
+++ /dev/null
@@ -1,139 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* Power State interrupts */
-GPIO_INT(SLP_S4_L,		PIN(I, 5), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(SLP_S3_L,		PIN(H, 3), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt)
-GPIO_INT(SLP_S0_L,		PIN(E, 4), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(SLP_SUS_L,		PIN(G, 2), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(VCCIN_AUX_VID0,	PIN(D, 0), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(RSMRST_PWRGD_L,	PIN(E, 1), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(CPU_C10_GATE_L,	PIN(G, 1), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_DRAM_OD,		PIN(D, 3), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt)
-GPIO_INT(PG_PP1050_ST_OD,	PIN(L, 1), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(VCCIN_AUX_VID1,	PIN(K, 1), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_VCCIO_EXT_OD,	PIN(D, 7), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt)
-GPIO_INT(ESPI_RESET_L, 	 	PIN(D, 2), GPIO_INT_FALLING | GPIO_SEL_1P8V, espi_reset_pin_asserted_interrupt)
-
-GPIO_INT(H1_EC_PWR_BTN_ODL,	PIN(E, 2), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt)
-#ifdef CONFIG_LOW_POWER_IDLE
-/* Used to wake up the EC from Deep Doze mode when writing to console */
-GPIO_INT(UART1_RX,	 	PIN(B, 0), GPIO_INT_BOTH, uart_deepsleep_interrupt)	/* UART_DBG_TX_EC_RX */
-#endif
-
-/* USB-C interrupts */
-GPIO_INT(USB_C0_INT_ODL,	PIN(K, 0), GPIO_INT_FALLING | GPIO_PULL_UP, usb_c0_interrupt) /* BC12 and charger */
-GPIO_INT(USB_C0_CCSBU_OVP_ODL,	PIN(K, 6), GPIO_INT_FALLING | GPIO_PULL_UP, c0_ccsbu_ovp_interrupt) /* Fault protection */
-
-/* Other interrupts */
-GPIO_INT(LID_OPEN,		PIN(F, 3), GPIO_INT_BOTH, lid_interrupt)
-GPIO_INT(EC_WP_OD,		PIN(A, 6), GPIO_INT_BOTH, switch_interrupt)
-
-/* Power sequence GPIOs */
-GPIO(EC_AP_RTCRST,		PIN(K, 2), GPIO_OUT_LOW)
-GPIO(EC_AP_PWR_BTN_ODL,		PIN(B, 6), GPIO_ODR_HIGH)
-GPIO(EC_AP_DPWROK,		PIN(L, 7), GPIO_OUT_LOW)
-GPIO(EC_AP_RSMRST_L,		PIN(H, 0), GPIO_OUT_LOW)
-GPIO(EC_AP_WAKE_ODL,		PIN(D, 5), GPIO_ODR_HIGH)
-GPIO(SYS_RST_ODL,		PIN(D, 1), GPIO_ODR_HIGH)
-GPIO(EC_AP_SYS_PWROK,		PIN(F, 2), GPIO_OUT_LOW)
-GPIO(PG_PP5000_U_OD,		PIN(E, 3), GPIO_INPUT)
-GPIO(EN_PP3300_A,		PIN(C, 5), GPIO_OUT_LOW)
-GPIO(EC_AP_PCH_PWROK_OD,	PIN(D, 6), GPIO_ODR_LOW)
-GPIO(EN_PP5000_U,		PIN(K, 5), GPIO_OUT_LOW)
-/* TODO(b:149775160) - Modify if needed if we ever use this signal. */
-GPIO(EN_VCCST,			PIN(D, 4), GPIO_INPUT)
-GPIO(EN_VCCIO_EXT,		PIN(B, 2), GPIO_OUT_LOW)
-GPIO(EC_PROCHOT_ODL,		PIN(I, 1), GPIO_ODR_HIGH | GPIO_SEL_1P8V)
-GPIO(EC_AP_VCCST_PWRGD_OD,	PIN(E, 5), GPIO_ODR_LOW)
-GPIO(ALL_SYS_PWRGD,		PIN(B, 7), GPIO_OUT_LOW)
-GPIO(EN_SLP_Z,			PIN(K, 3), GPIO_OUT_LOW)
-
-/* Required for icelake chipset code, but implemented through other means for dedede */
-UNIMPLEMENTED(AC_PRESENT)
-UNIMPLEMENTED(PG_EC_DSW_PWROK)
-UNIMPLEMENTED(PG_EC_ALL_SYS_PWRGD)
-
-/* I2C pins - Alternate function below configures I2C module on these pins */
-GPIO(EC_I2C_EEPROM_SCL,		PIN(B, 3), GPIO_INPUT)
-GPIO(EC_I2C_EEPROM_SDA,		PIN(B, 4), GPIO_INPUT)
-GPIO(EC_I2C_BATTERY_SCL,	PIN(C, 1), GPIO_INPUT)
-GPIO(EC_I2C_BATTERY_SDA,	PIN(C, 2), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_SCL,		PIN(A, 4), GPIO_INPUT)
-GPIO(EC_I2C_USB_C0_SDA,		PIN(A, 5), GPIO_INPUT)
-GPIO(EC_AP_USB_C0_HPD,		PIN(L, 4), GPIO_OUT_LOW)
-GPIO(EC_AP_USB_C1_HDMI_HPD,	PIN(K, 7), GPIO_OUT_LOW)
-GPIO(EN_USB_A0_VBUS,		PIN(L, 6), GPIO_OUT_LOW) /* Board rev 1, NC board rev 0 */
-
-/* MKBP event synchronization */
-GPIO(EC_AP_MKBP_INT_L,		PIN(L, 5), GPIO_ODR_HIGH)
-
-
-/* Misc */
-GPIO(EN_BL_OD,			PIN(K, 4), GPIO_ODR_LOW)
-GPIO(EC_ENTERING_RW,		PIN(G, 0), GPIO_OUT_LOW)
-GPIO(EC_ENTERING_RW2,		PIN(C, 7), GPIO_OUT_LOW)
-GPIO(CCD_MODE_ODL,		PIN(H, 5), GPIO_ODR_HIGH)
-GPIO(EC_BATTERY_PRES_ODL,	PIN(I, 4), GPIO_INPUT)
-GPIO(ECH1_PACKET_MODE,		PIN(H, 1), GPIO_OUT_LOW)
-GPIO(LTE_EN, 			PIN(C, 3), GPIO_OUT_LOW)
-GPIO(WWAN_CONFIG, 		PIN(A, 0), GPIO_INPUT |GPIO_PULL_UP)
-
-/* LED */
-GPIO(LED_R_ODL,			PIN(A, 1), GPIO_ODR_HIGH)
-GPIO(LED_G_ODL,			PIN(A, 2), GPIO_ODR_HIGH)
-GPIO(LED_B_ODL,			PIN(A, 3), GPIO_ODR_HIGH)
-
-/* NC pins, enable internal pull-down to avoid floating state. */
-GPIO(GPIOB5_NC, PIN(B, 5), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOC0_NC, PIN(C, 0), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOC4_NC, PIN(C, 4), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOC6_NC, PIN(C, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOE0_NC, PIN(E, 0), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOE6_NC, PIN(E, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOE7_NC, PIN(E, 7), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOF0_NC, PIN(F, 0), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOF1_NC, PIN(F, 1), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOF4_NC, PIN(F, 4), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOF5_NC, PIN(F, 5), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOF6_NC, PIN(F, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOF7_NC, PIN(F, 7), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOG3_NC, PIN(G, 3), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOG4_NC, PIN(G, 4), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOG5_NC, PIN(G, 5), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOG6_NC, PIN(G, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOG7_NC, PIN(G, 7), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOH2_NC, PIN(H, 2), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOH4_NC, PIN(H, 4), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOH6_NC, PIN(H, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOI6_NC, PIN(I, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOI7_NC, PIN(I, 7), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOJ0_NC, PIN(J, 0), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOJ1_NC, PIN(J, 1), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOJ3_NC, PIN(J, 3), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOJ4_NC, PIN(J, 4), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOJ5_NC, PIN(J, 5), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOJ6_NC, PIN(J, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOL0_NC, PIN(L, 0), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOL3_NC, PIN(L, 3), GPIO_INPUT | GPIO_PULL_DOWN)
-GPIO(GPIOM6_NC, PIN(M, 6), GPIO_INPUT | GPIO_PULL_DOWN)
-
-/* Alternate functions GPIO definitions */
-/* UART */
-ALTERNATE(PIN_MASK(B, BIT(0) | BIT(1)), 0, MODULE_UART, 0)		/* UART for debug */
-
-/* I2C */
-ALTERNATE(PIN_MASK(B, BIT(3) | BIT(4)), 0, MODULE_I2C, 0)		/* I2C0 EEPROM */
-ALTERNATE(PIN_MASK(C, BIT(1) | BIT(2)), 0, MODULE_I2C, 0)		/* I2C1 BATTERY */
-ALTERNATE(PIN_MASK(A, BIT(4) | BIT(5)), 0, MODULE_I2C, 0)		/* I2C5 USB_C0 */
-
-/* ADC */
-ALTERNATE(PIN_MASK(L, BIT(2)), 0, MODULE_ADC, 0)    /* ADC15:TEMP_SENSOR3 */
-ALTERNATE(PIN_MASK(I, BIT(0) | BIT(2) | BIT(3)), 0, MODULE_ADC, 0)	/* ADC0: EC_VSNS_PP3300_A, ADC2: TEMP_SENSOR_1, ADC3: TEMP_SENSOR_2 */
diff --git a/board/sasukette/led.c b/board/sasukette/led.c
deleted file mode 100644
index 28643a7b87..0000000000
--- a/board/sasukette/led.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for Sasukette
- *
- */
-
-#include "chipset.h"
-#include "ec_commands.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "led_common.h"
-#include "led_onoff_states.h"
-
-#define LED_OFF_LVL	1
-#define LED_ON_LVL	0
-
-__override const int led_charge_lvl_1 = 1;
-
-__override const int led_charge_lvl_2 = 100;
-
-/* Sasukette : There are 3 leds for AC, Battery and Power */
-__override struct led_descriptor
-			led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
-	[STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC},
-			{LED_OFF, 1 * LED_ONE_SEC} },
-	[STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_RED, LED_INDEFINITE} },
-	[STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN, LED_INDEFINITE} },
-	[STATE_DISCHARGE_S0] = {{EC_LED_COLOR_BLUE, LED_INDEFINITE} },
-	[STATE_DISCHARGE_S0_BAT_LOW] = {{LED_OFF, LED_INDEFINITE} },
-	[STATE_DISCHARGE_S3] = {{LED_OFF, LED_INDEFINITE} },
-	[STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} },
-	[STATE_BATTERY_ERROR] = {{EC_LED_COLOR_RED, 0.5 * LED_ONE_SEC},
-			{LED_OFF, 0.5 * LED_ONE_SEC} },
-	[STATE_FACTORY_TEST] = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC},
-			{LED_OFF, 1 * LED_ONE_SEC} },
-};
-
-__override const struct led_descriptor
-		led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = {
-	[PWR_LED_STATE_ON]           = {{EC_LED_COLOR_BLUE, LED_INDEFINITE} },
-	[PWR_LED_STATE_SUSPEND_AC]   = {{LED_OFF, LED_INDEFINITE} },
-	[PWR_LED_STATE_SUSPEND_NO_AC] = {{LED_OFF, LED_INDEFINITE} },
-	[PWR_LED_STATE_OFF]           = {{LED_OFF, LED_INDEFINITE} },
-};
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_BATTERY_LED,
-	EC_LED_ID_POWER_LED
-};
-
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_power(enum ec_led_colors color)
-{
-	/* Don't set led if led_auto_control is disabled. */
-	if (!led_auto_control_is_enabled(EC_LED_ID_POWER_LED) ||
-		!led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) {
-		return;
-	}
-
-	if (color == EC_LED_COLOR_BLUE) {
-		gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_PWR_LED_BLUE_L, LED_ON_LVL);
-	} else {
-		/* LED_OFF and unsupported colors */
-		gpio_set_level(GPIO_PWR_LED_BLUE_L, LED_OFF_LVL);
-	}
-}
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
-	/* Don't set led if led_auto_control is disabled. */
-	if (!led_auto_control_is_enabled(EC_LED_ID_POWER_LED) ||
-		!led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) {
-		return;
-	}
-
-	/* Battery leds must be turn off when blue led is on
-	 * because the led is 3-in-1 led.
-	 */
-	if (!gpio_get_level(GPIO_PWR_LED_BLUE_L)) {
-		gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL); /*red*/
-		gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_OFF_LVL); /*green*/
-		return;
-	}
-
-	switch (color) {
-	case EC_LED_COLOR_GREEN:
-		gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL); /*red*/
-		gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_ON_LVL); /*green*/
-		break;
-	case EC_LED_COLOR_RED:
-		gpio_set_level(GPIO_BAT_LED_RED_L, LED_ON_LVL); /*red*/
-		gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_OFF_LVL); /*green*/
-		break;
-	default: /* LED_OFF and other unsupported colors */
-		gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL); /*red*/
-		gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_OFF_LVL); /*green*/
-		break;
-	}
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		brightness_range[EC_LED_COLOR_GREEN] = 1;
-		brightness_range[EC_LED_COLOR_RED] = 1;
-	} else if (led_id == EC_LED_ID_POWER_LED) {
-		brightness_range[EC_LED_COLOR_BLUE] = 1;
-	}
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	if (led_id == EC_LED_ID_BATTERY_LED) {
-		gpio_set_level(GPIO_PWR_LED_BLUE_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_BAT_LED_GREEN_L,
-			!brightness[EC_LED_COLOR_GREEN]);
-		gpio_set_level(GPIO_BAT_LED_RED_L,
-			!brightness[EC_LED_COLOR_RED]);
-	} else if (led_id == EC_LED_ID_POWER_LED) {
-		gpio_set_level(GPIO_PWR_LED_BLUE_L,
-			!brightness[EC_LED_COLOR_BLUE]);
-		gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_OFF_LVL);
-		gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL);
-	}
-
-	return EC_SUCCESS;
-}
diff --git a/board/sasukette/usb_pd_policy.c b/board/sasukette/usb_pd_policy.c
deleted file mode 100644
index b0e1098e4d..0000000000
--- a/board/sasukette/usb_pd_policy.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "charge_manager.h"
-#include "chipset.h"
-#include "common.h"
-#include "console.h"
-#include "driver/charger/isl923x_public.h"
-#include "driver/tcpm/tcpci.h"
-#include "usb_pd.h"
-
-#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
-
-int pd_check_vconn_swap(int port)
-{
-	/* Allow VCONN swaps if the AP is on. */
-	return chipset_in_state(CHIPSET_STATE_ANY_SUSPEND | CHIPSET_STATE_ON);
-}
-
-void pd_power_supply_reset(int port)
-{
-	/* Disable VBUS */
-	tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW);
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-}
-
-int pd_set_power_supply_ready(int port)
-{
-	int rv;
-
-	if (port >= board_get_usb_pd_port_count())
-		return EC_ERROR_INVAL;
-
-	/* Disable charging. */
-	rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW);
-	if (rv)
-		return rv;
-
-	/* Our policy is not to source VBUS when the AP is off. */
-	if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
-		return EC_ERROR_NOT_POWERED;
-
-	/* Provide Vbus. */
-	rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH);
-	if (rv)
-		return rv;
-
-	rv = raa489000_enable_asgate(port, true);
-	if (rv)
-		return rv;
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-
-	return EC_SUCCESS;
-}
-
diff --git a/board/sasukette/vif_override.xml b/board/sasukette/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/sasukette/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
-     Definition from the USB-IF.
--->