servo_v4: Add CHG / DUT port voltage synchronization

The previous method of negotiating > 5V on CHG port followed by
asynchronously negotiating > 5V on DUT port (and then switching DUT VBUS
source from internal 5V to DUT) will often not function correctly due to
VBUS glitching on the switchover. Instead, immediately switch VBUS
source to CHG when detected, and negotiate > 5V on CHG only after DUT
has requested a transition.

BUG=chromium:775542
BRANCH=servo
TEST=Attach {kevin, scarlet} to servo_v4, attach Apple charger to
servo_v4, verify DUTs charge at 9V and consoles are reachable on
scarlet.

Change-Id: I1e53f1e74e5ab1cd32a252243c23faaa8fce107b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/724683
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

1 files changed, 109 insertions, 52 deletions

diff --git a/board/servo_v4/usb_pd_policy.c b/board/servo_v4/usb_pd_policy.c
index 0ba2777779..8f8f8e60da 100644
--- a/board/servo_v4/usb_pd_policy.c
+++ b/board/servo_v4/usb_pd_policy.c
@@ -55,7 +55,9 @@ struct vbus_prop {
 	int ma;
 };
 static struct vbus_prop vbus[CONFIG_USB_PD_PORT_COUNT];
-static int charge_port_is_active;
+static struct vbus_prop src_pdo_charge[2];
+static int active_charge_port = CHARGE_PORT_NONE;
+static enum charge_supplier active_charge_supplier;
 static uint8_t vbus_rp = TYPEC_RP_RESERVED;
 static int disable_dts_mode;
 
@@ -84,6 +86,24 @@ static int pd_src_rd_threshold[TYPEC_RP_RESERVED] = {
 	PD_SRC_3_0_RD_THRESH_MV,
 };
 
+/*
+ * Set the USB PD max voltage to value appropriate for the board version.
+ * The red/blue versions of servo_v4 have an ESD between VBUS and CC1/CC2
+ * that has a breakdown voltage of 11V.
+ */
+#define MAX_MV_RED_BLUE 9000
+
+static uint32_t max_supported_voltage(void)
+{
+	return board_get_version() >= BOARD_VERSION_BLACK ?
+		PD_MAX_VOLTAGE_MV : MAX_MV_RED_BLUE;
+}
+
+static int charge_port_is_active(void)
+{
+	return active_charge_port == CHG && vbus[CHG].mv > 0;
+}
+
 static void board_manage_dut_port(void)
 {
 	int rp;
@@ -97,7 +117,7 @@ static void board_manage_dut_port(void)
 
 	/* Assume the default value of Rp */
 	rp = TYPEC_RP_USB;
-	if (vbus[CHG].mv == 5000) {
+	if (vbus[CHG].mv == PD_MIN_MV && charge_port_is_active()) {
 		/* Only advertise higher current via Rp if vbus == 5V */
 		if (vbus[CHG].ma >= 3000)
 			/* CHG port is connected and DUt can advertise 3A */
@@ -112,50 +132,65 @@ static void board_manage_dut_port(void)
 		tcpm_select_rp_value(DUT, rp);
 
 	/*
-	 * If CHG vbus voltage/current doesn't match the DUT port value, then
-	 * update the contract. If DUT port is not in the correct state, then
-	 * this call does nothing.
+	 * Update PD contract to reflect new available CHG
+	 * voltage/current values.
 	 */
-	if (vbus[CHG].mv != vbus[DUT].mv || vbus[CHG].ma != vbus[DUT].ma)
-		/*
-		 * Update PD contract to reflect new available CHG
-		 * voltage/current values.
-		 */
-		pd_update_contract(DUT);
+	pd_update_contract(DUT);
 }
 
 static void update_ports(void)
 {
+	int v5_ma, pdo_index;
+	uint32_t pdo, max_ma, max_mv;
+
 	/*
 	 * CHG Vbus has changed states, update PDO that reflects CHG port
 	 * state
 	 */
-	if (!vbus[CHG].mv || !charge_port_is_active) {
+	if (!charge_port_is_active()) {
 		/* CHG Vbus has dropped, so always source DUT Vbus from host */
-		gpio_set_level(GPIO_HOST_OR_CHG_CTL, 0);
 		chg_pdo_cnt = 0;
 	} else {
-		int v5_ma = vbus[CHG].mv > 5000 ? 500 : vbus[CHG].ma;
+		/* 5V PDO */
+		v5_ma = vbus[CHG].mv > PD_MIN_MV ? 500 : vbus[CHG].ma;
 
-		pd_src_chg_pdo[0] = PDO_FIXED_VOLT(5000) |
+		pd_src_chg_pdo[0] = PDO_FIXED_VOLT(PD_MIN_MV) |
 			PDO_FIXED_CURR(v5_ma) | DUT_PDO_FIXED_FLAGS |
 			PDO_FIXED_EXTERNAL;
+		src_pdo_charge[0].mv = PD_MIN_MV;
+		src_pdo_charge[0].ma = v5_ma;
 
-		chg_pdo_cnt = 1;
-		if (vbus[CHG].mv > 5000) {
-			/*
-			 * CHG vbus is > 5V so need an entry for vSafe5V and an
-			 * entry that reflects CHG VBUS
-			 */
-			pd_src_chg_pdo[1] = PDO_FIXED_VOLT(vbus[CHG].mv) |
-				PDO_FIXED_CURR(vbus[CHG].ma) |
-				DUT_PDO_FIXED_FLAGS | PDO_FIXED_EXTERNAL;
-			chg_pdo_cnt = 2;
+		/*
+		 * Check if a CHG partner non-vSafe5v PDO is available and
+		 * advertise it to the DUT.
+		 */
+		if (active_charge_supplier == CHARGE_SUPPLIER_PD) {
+			max_mv = max_supported_voltage();
+			pdo_index = pd_find_pdo_index(CHG, max_mv, &pdo);
+			if (pdo_index > 0) {
+				pd_extract_pdo_power(pdo, &max_ma, &max_mv);
+				pd_src_chg_pdo[1] =
+					PDO_FIXED_VOLT(max_mv) |
+					PDO_FIXED_CURR(max_ma) |
+					DUT_PDO_FIXED_FLAGS |
+					PDO_FIXED_EXTERNAL;
+				src_pdo_charge[1].mv = max_mv;
+				src_pdo_charge[1].ma = max_ma;
+				chg_pdo_cnt = 2;
+			}
+		} else {
+			chg_pdo_cnt = 1;
 		}
 	}
 
 	/* Call DUT port manager to update Rp and possible PD contract */
 	board_manage_dut_port();
+
+	/*
+	 * Supply VBUS from the CHG port if available. This may glitch VBUS
+	 * on the DUT during switchover.
+	 */
+	gpio_set_level(GPIO_HOST_OR_CHG_CTL, chg_pdo_cnt > 0);
 }
 
 int board_set_active_charge_port(int charge_port)
@@ -163,9 +198,13 @@ int board_set_active_charge_port(int charge_port)
 	if (charge_port == DUT)
 		return -1;
 
-	charge_port_is_active = (charge_port == CHG);
+	active_charge_port = charge_port;
 	update_ports();
 
+	if (!charge_port_is_active())
+		/* Don't negotiate > 5V, except in lockstep with DUT */
+		pd_set_external_voltage_limit(CHG, PD_MIN_MV);
+
 	return 0;
 }
 
@@ -175,9 +214,11 @@ void board_set_charge_limit(int port, int supplier, int charge_ma,
 	if (port != CHG)
 		return;
 
+	active_charge_supplier = supplier;
+
 	/* Update the voltage/current values for CHG port */
-	vbus[CHG].mv = charge_mv;
 	vbus[CHG].ma = charge_ma;
+	vbus[CHG].mv = charge_mv;
 	update_ports();
 }
 
@@ -353,7 +394,7 @@ int charge_manager_get_source_pdo(const uint32_t **src_pdo, const int port)
 	 * If CHG is providing VBUS, then advertise what's available on the CHG
 	 * port, otherwise used the fixed value that matches host capabilities.
 	 */
-	if (vbus[CHG].mv && charge_port_is_active) {
+	if (charge_port_is_active()) {
 		*src_pdo =  pd_src_chg_pdo;
 		pdo_cnt = chg_pdo_cnt;
 	} else {
@@ -372,25 +413,34 @@ int pd_is_valid_input_voltage(int mv)
 
 void pd_transition_voltage(int idx)
 {
-	/*
-	 * Up to this point, VBUS will have been supplied by host. If
-	 * vbus[CHG].mv is set, then that means the CHG port is in a steady
-	 * state condition and its voltage/current values have been communicated
-	 * to the DUT in the SRC_CAP message. If CHG vbus > 5V then 2
-	 * chg_src_pdo entries will have been sent. Only allow pass through
-	 * charging from CHG vbus if the pdo idx requested by the DUT matches
-	 * the number of chg_src_pdo entries.
-	 *
-	 */
-	if (vbus[CHG].mv && idx == chg_pdo_cnt) {
-		gpio_set_level(GPIO_HOST_OR_CHG_CTL, 1);
+	timestamp_t deadline;
+	uint32_t mv = src_pdo_charge[idx - 1].mv;
+
+	/* Is this a transition to a new voltage? */
+	if (charge_port_is_active() && vbus[CHG].mv != mv) {
 		/*
-		 * VBUS being provided by CHG port now. Update DUT port's vbus
-		 * info with the CHG port's values.
+		 * Remove voltage limit on charge port, this should cause
+		 * the port to select the desired PDO.
 		 */
-		vbus[DUT].mv = vbus[CHG].mv;
-		vbus[DUT].ma = vbus[CHG].ma;
+		pd_set_external_voltage_limit(CHG, max_supported_voltage());
+
+		/* Wait for CHG transition */
+		deadline.val = get_time().val + PD_T_PS_TRANSITION;
+		CPRINTS("Waiting for CHG port transition");
+		while (vbus[CHG].mv != mv && get_time().val < deadline.val)
+			msleep(10);
+
+		if (vbus[CHG].mv != mv) {
+			CPRINTS("Missed CHG transition, resetting DUT");
+			pd_power_supply_reset(DUT);
+			return;
+		}
+
+		CPRINTS("CHG transitioned");
 	}
+
+	vbus[DUT].mv = vbus[CHG].mv;
+	vbus[DUT].ma = vbus[CHG].ma;
 }
 
 int pd_set_power_supply_ready(int port)
@@ -399,15 +449,21 @@ int pd_set_power_supply_ready(int port)
 	if (port == CHG)
 		return EC_ERROR_INVAL;
 
-	/* Only ever allow host vbus at this point */
-	gpio_set_level(GPIO_HOST_OR_CHG_CTL, 0);
-
 	/* Enable VBUS */
 	gpio_set_level(GPIO_DUT_CHG_EN, 1);
 
-	/* Host vbus is always 5V/500mA */
-	vbus[DUT].mv = 5000;
-	vbus[DUT].ma = 500;
+	if (charge_port_is_active()) {
+		if (vbus[CHG].mv != PD_MIN_MV)
+			CPRINTS("ERROR, CHG port voltage %d != PD_MIN_MV",
+				vbus[CHG].mv);
+
+		vbus[DUT].mv = vbus[CHG].mv;
+		vbus[DUT].ma = vbus[CHG].mv;
+	} else {
+		/* Host vbus is always 5V/500mA */
+		vbus[DUT].mv = PD_MIN_MV;
+		vbus[DUT].ma = 500;
+	}
 
 	/* Enable CCD, if debuggable TS attached */
 	if (pd_ts_dts_plugged(DUT))
@@ -426,12 +482,13 @@ void pd_power_supply_reset(int port)
 
 	/* Disable VBUS */
 	gpio_set_level(GPIO_DUT_CHG_EN, 0);
-	/* Set default VBUS source to Host */
-	gpio_set_level(GPIO_HOST_OR_CHG_CTL, 0);
 
 	/* Host vbus is always 5V/500mA */
 	vbus[DUT].mv = 0;
 	vbus[DUT].ma = 0;
+
+	/* DUT is lost, back to 5V limit on CHG */
+	pd_set_external_voltage_limit(CHG, PD_MIN_MV);
 }
 
 int pd_snk_is_vbus_provided(int port)