treeya: Add new grunt-family board.

Add treeya board. Initially base on aleena.

BUG=b:135551210
BRANCH=none
TEST=emerge-grunt chromeos-ec
Ensure that ec.bin are created

Change-Id: I16abc65af81d5127c0f964a42327e60a8674be22
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1710209
Reviewed-by: Edward Hill <ecgh@chromium.org>
Commit-Queue: Edward Hill <ecgh@chromium.org>
Tested-by: Edward Hill <ecgh@chromium.org>

1 files changed, 252 insertions, 0 deletions

diff --git a/board/treeya/board.c b/board/treeya/board.c
new file mode 100644
index 0000000000..12f985e727
--- /dev/null
+++ b/board/treeya/board.c
@@ -0,0 +1,252 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Treeya board-specific configuration */
+
+#include "adc.h"
+#include "adc_chip.h"
+#include "button.h"
+#include "charge_manager.h"
+#include "charge_state.h"
+#include "charge_state_v2.h"
+#include "common.h"
+#include "compile_time_macros.h"
+#include "console.h"
+#include "driver/accelgyro_bmi160.h"
+#include "driver/led/lm3630a.h"
+#include "driver/ppc/sn5s330.h"
+#include "driver/tcpm/anx74xx.h"
+#include "driver/tcpm/ps8xxx.h"
+#include "driver/temp_sensor/sb_tsi.h"
+#include "ec_commands.h"
+#include "extpower.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "i2c.h"
+#include "keyboard_scan.h"
+#include "lid_switch.h"
+#include "power.h"
+#include "power_button.h"
+#include "pwm.h"
+#include "pwm_chip.h"
+#include "registers.h"
+#include "switch.h"
+#include "system.h"
+#include "tablet_mode.h"
+#include "task.h"
+#include "tcpci.h"
+#include "temp_sensor.h"
+#include "thermistor.h"
+#include "usb_mux.h"
+#include "usb_pd_tcpm.h"
+#include "usbc_ppc.h"
+#include "util.h"
+
+#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
+#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+
+#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
+static void anx74xx_cable_det_handler(void)
+{
+	int cable_det = gpio_get_level(GPIO_USB_C0_CABLE_DET);
+	int reset_n = gpio_get_level(GPIO_USB_C0_PD_RST_L);
+
+	/*
+	 * A cable_det low->high transition was detected. If following the
+	 * debounce time, cable_det is high, and reset_n is low, then ANX3429 is
+	 * currently in standby mode and needs to be woken up. Set the
+	 * TCPC_RESET event which will bring the ANX3429 out of standby
+	 * mode. Setting this event is gated on reset_n being low because the
+	 * ANX3429 will always set cable_det when transitioning to normal mode
+	 * and if in normal mode, then there is no need to trigger a tcpc reset.
+	 */
+	if (cable_det && !reset_n)
+		task_set_event(TASK_ID_PD_C0, PD_EVENT_TCPC_RESET, 0);
+}
+DECLARE_DEFERRED(anx74xx_cable_det_handler);
+
+void anx74xx_cable_det_interrupt(enum gpio_signal signal)
+{
+	/* debounce for 2 msec */
+	hook_call_deferred(&anx74xx_cable_det_handler_data, (2 * MSEC));
+}
+#endif
+
+static void ppc_interrupt(enum gpio_signal signal)
+{
+	int port = (signal == GPIO_USB_C0_SWCTL_INT_ODL) ? 0 : 1;
+
+	sn5s330_interrupt(port);
+}
+
+#include "gpio_list.h"
+
+const enum gpio_signal hibernate_wake_pins[] = {
+	GPIO_LID_OPEN,
+	GPIO_AC_PRESENT,
+	GPIO_POWER_BUTTON_L,
+	GPIO_EC_RST_ODL,
+};
+const int hibernate_wake_pins_used =  ARRAY_SIZE(hibernate_wake_pins);
+
+/* I2C port map. */
+const struct i2c_port_t i2c_ports[] = {
+	{"power",   I2C_PORT_POWER,   100, GPIO_I2C0_SCL, GPIO_I2C0_SDA},
+	{"tcpc0",   I2C_PORT_TCPC0,   400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
+	{"tcpc1",   I2C_PORT_TCPC1,   400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
+	{"thermal", I2C_PORT_THERMAL, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
+	{"kblight", I2C_PORT_KBLIGHT, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA},
+	{"sensor",  I2C_PORT_SENSOR,  400, GPIO_I2C7_SCL, GPIO_I2C7_SDA},
+};
+const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
+
+/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
+const struct pwm_t pwm_channels[] = {
+	[PWM_CH_KBLIGHT] = {
+		.channel = 5,
+		.flags = PWM_CONFIG_DSLEEP,
+		.freq = 100,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
+
+void board_update_sensor_config_from_sku(void)
+{
+	if (board_is_convertible()) {
+		/* Enable Gyro interrupts */
+		gpio_enable_interrupt(GPIO_6AXIS_INT_L);
+	} else {
+		motion_sensor_count = 0;
+		/* Device is clamshell only */
+		tablet_set_mode(0);
+		/* Gyro is not present, don't allow line to float */
+		gpio_set_flags(GPIO_6AXIS_INT_L,
+			       GPIO_INPUT | GPIO_PULL_DOWN);
+	}
+}
+
+void board_overcurrent_event(int port, int is_overcurrented)
+{
+	enum gpio_signal signal = (port == 0) ? GPIO_USB_C0_OC_L
+					      : GPIO_USB_C1_OC_L;
+	/* Note that the levels are inverted because the pin is active low. */
+	int lvl = is_overcurrented ? 0 : 1;
+
+	gpio_set_level(signal, lvl);
+
+	CPRINTS("p%d: overcurrent!", port);
+}
+
+void board_tcpc_init(void)
+{
+	int port;
+
+	/* Only reset TCPC if not sysjump */
+	if (!system_jumped_to_this_image())
+		board_reset_pd_mcu();
+
+	/* Enable PPC interrupts. */
+	gpio_enable_interrupt(GPIO_USB_C0_SWCTL_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_SWCTL_INT_ODL);
+
+	/* Enable TCPC interrupts. */
+	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);
+
+#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
+	/* Enable CABLE_DET interrupt for ANX3429 wake from standby */
+	gpio_enable_interrupt(GPIO_USB_C0_CABLE_DET);
+#endif
+	/*
+	 * Initialize HPD to low; after sysjump SOC needs to see
+	 * HPD pulse to enable video path
+	 */
+	for (port = 0; port < CONFIG_USB_PD_PORT_COUNT; port++) {
+		const struct usb_mux *mux = &usb_muxes[port];
+
+		mux->hpd_update(port, 0, 0);
+	}
+}
+DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1);
+
+uint16_t tcpc_get_alert_status(void)
+{
+	uint16_t status = 0;
+
+	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) {
+		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
+			status |= PD_STATUS_TCPC_ALERT_0;
+	}
+
+	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL)) {
+		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
+			status |= PD_STATUS_TCPC_ALERT_1;
+	}
+
+	return status;
+}
+
+/**
+ * Power on (or off) a single TCPC.
+ * minimum on/off delays are included.
+ *
+ * @param port	Port number of TCPC.
+ * @param mode	0: power off, 1: power on.
+ */
+void board_set_tcpc_power_mode(int port, int mode)
+{
+	if (port != USB_PD_PORT_ANX74XX)
+		return;
+
+	switch (mode) {
+	case ANX74XX_NORMAL_MODE:
+		gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 1);
+		msleep(ANX74XX_PWR_H_RST_H_DELAY_MS);
+		gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
+		break;
+	case ANX74XX_STANDBY_MODE:
+		gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
+		msleep(ANX74XX_RST_L_PWR_L_DELAY_MS);
+		gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0);
+		msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
+		break;
+	default:
+		break;
+	}
+}
+
+void board_reset_pd_mcu(void)
+{
+	/* Assert reset to TCPC1 (ps8751) */
+	gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
+
+	/* Assert reset to TCPC0 (anx3429) */
+	gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
+
+	/* TCPC1 (ps8751) requires 1ms reset down assertion */
+	msleep(MAX(1, ANX74XX_RST_L_PWR_L_DELAY_MS));
+
+	/* Deassert reset to TCPC1 */
+	gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
+	/* Disable TCPC0 power */
+	gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0);
+
+	/*
+	 * anx3429 requires 10ms reset/power down assertion
+	 */
+	msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
+	board_set_tcpc_power_mode(USB_PD_PORT_ANX74XX, 1);
+}
+
+static void board_kblight_init(void)
+{
+	/*
+	 * Enable keyboard backlight. This needs to be done here because
+	 * the chip doesn't have power until PP3300_S0 comes up.
+	 */
+	gpio_set_level(GPIO_KB_BL_EN, 1);
+	lm3630a_poweron();
+}
+DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_kblight_init, HOOK_PRIO_DEFAULT);