Trembyle: Make GPIO names match schematic

BUG=none
BRANCH=none
TEST=make BOARD=trembyle

Change-Id: I870bb384e59468c91ad19ebfbdf6d376438ae7ba
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1755648
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Keith Short <keithshort@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>

1 files changed, 40 insertions, 40 deletions

diff --git a/board/trembyle/gpio.inc b/board/trembyle/gpio.inc
index 0a4f8cf304..cb5889aae0 100644
--- a/board/trembyle/gpio.inc
+++ b/board/trembyle/gpio.inc
@@ -14,16 +14,16 @@ GPIO_INT(USB_C0_PPC_INT_ODL,	PIN(6, 3), GPIO_INT_FALLING,			ppc_interrupt)
 GPIO_INT(USB_C1_PPC_INT_ODL,	PIN(D, 4), GPIO_INT_FALLING,			ppc_interrupt)
 GPIO_INT(USB_C0_BC12_INT_ODL,	PIN(9, 3), GPIO_INT_FALLING | GPIO_PULL_UP,	bc12_interrupt)
 GPIO_INT(USB_C1_BC12_INT_ODL, 	PIN(A, 4), GPIO_INT_FALLING | GPIO_PULL_UP,	bc12_interrupt)
-GPIO_INT(PCH_SLP_S3_L,		PIN(7, 4), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(PCH_SLP_S5_L,		PIN(E, 0), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(S0_PGOOD,		PIN(5, 6), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(S5_PGOOD,		PIN(3, 7), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(POWER_BUTTON_L,	PIN(0, 1), GPIO_INT_BOTH,			power_button_interrupt)
+GPIO_INT(SLP_S3_L,		PIN(7, 4), GPIO_INT_BOTH,			power_signal_interrupt)
+GPIO_INT(SLP_S5_L,		PIN(E, 0), GPIO_INT_BOTH,			power_signal_interrupt)
+GPIO_INT(S0_PWROK_OD,		PIN(5, 6), GPIO_INT_BOTH,			power_signal_interrupt)
+GPIO_INT(EC_PWROK_OD,		PIN(3, 7), GPIO_INT_BOTH,			power_signal_interrupt)
+GPIO_INT(EC_PWR_BTN_ODL,	PIN(0, 1), GPIO_INT_BOTH,			power_button_interrupt)
 GPIO_INT(LID_OPEN,		PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	lid_interrupt)
-GPIO_INT(AC_PRESENT,		PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	extpower_interrupt)
-GPIO_INT(WP_L,			PIN(5, 0), GPIO_INT_BOTH,			switch_interrupt)
-GPIO_INT(VOLUME_DOWN_L,		PIN(A, 6), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
-GPIO_INT(VOLUME_UP_L,		PIN(9, 5), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
+GPIO_INT(ACOK_OD,		PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	extpower_interrupt)
+GPIO_INT(EC_WP_L,		PIN(5, 0), GPIO_INT_BOTH,			switch_interrupt)
+GPIO_INT(VOLDN_BTN_ODL,		PIN(A, 6), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
+GPIO_INT(VOLUP_BTN_ODL,		PIN(9, 5), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
 GPIO_INT(6AXIS_INT_L,		PIN(A, 0), GPIO_INT_FALLING | GPIO_PULL_UP,	bmi160_interrupt)
 
 /* GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an interrupt handler. */
@@ -31,21 +31,21 @@ GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH)
 
 GPIO(3AXIS_INT_L,		PIN(9, 6), GPIO_INPUT | GPIO_PULL_UP)		/* 3 Axis Accel */
 GPIO(CCD_MODE_ODL,		PIN(C, 6), GPIO_INPUT)				/* Case Closed Debug Mode */
-GPIO(CPU_PROCHOT,		PIN(D, 5), GPIO_ODR_HIGH)			/* PROCHOT to SOC */
-GPIO(EC_BATT_PRES_L,		PIN(4, 1), GPIO_INPUT)				/* Battery Present */
-GPIO(EC_INT_L,			PIN(A, 3), GPIO_ODR_HIGH)			/* Sensor MKBP event to SOC */
+GPIO(PROCHOT_ODL,		PIN(D, 5), GPIO_ODR_HIGH)			/* PROCHOT to SOC */
+GPIO(EC_BATT_PRES_ODL,		PIN(4, 1), GPIO_INPUT)				/* Battery Present */
+GPIO(EC_AP_INT_ODL,		PIN(A, 3), GPIO_ODR_HIGH)			/* Sensor MKBP event to SOC */
 GPIO(EN_PWR_A,			PIN(B, 7), GPIO_OUT_LOW)			/* Enable Power */
-GPIO(ENABLE_BACKLIGHT_L,	PIN(A, 2), GPIO_OUT_HIGH)			/* Enable Backlight */
-GPIO(ENTERING_RW,		PIN(E, 5), GPIO_OUT_LOW)			/* EC Entering RW */
-GPIO(PCH_PWRBTN_L,		PIN(8, 6), GPIO_OUT_HIGH)			/* Power Button to SOC */
-GPIO(PCH_RSMRST_L,		PIN(A, 1), GPIO_OUT_LOW)			/* RSMRST# to SOC */
-GPIO(PCH_SYS_PWROK,		PIN(7, 5), GPIO_OUT_LOW)			/* Power OK to SOC */
-GPIO(PCH_WAKE_L,		PIN(0, 3), GPIO_OUT_HIGH)			/* Wake SOC */
-GPIO(SYS_RESET_L,		PIN(C, 7), GPIO_ODR_HIGH)			/* Cold Reset to SOC */
+GPIO(EC_EDP_BL_DISABLE,		PIN(A, 2), GPIO_OUT_HIGH)			/* Enable Backlight */
+GPIO(EC_ENTERING_RW,		PIN(E, 5), GPIO_OUT_LOW)			/* EC Entering RW */
+GPIO(EC_FCH_PWR_BTN_L,		PIN(8, 6), GPIO_OUT_HIGH)			/* Power Button to SOC */
+GPIO(EC_FCH_RSMRST_L,		PIN(A, 1), GPIO_OUT_LOW)			/* RSMRST# to SOC */
+GPIO(EC_FCH_PWROK,		PIN(7, 5), GPIO_OUT_LOW)			/* Power OK to SOC */
+GPIO(EC_FCH_WAKE_L,		PIN(0, 3), GPIO_OUT_HIGH)			/* Wake SOC */
+GPIO(EC_SYS_RST_L,		PIN(C, 7), GPIO_ODR_HIGH)			/* Cold Reset to SOC */
 GPIO(USB_C0_TCPC_RST_L,		PIN(E, 1), GPIO_OUT_HIGH)			/* C0 TCPC Reset */
 GPIO(USB_C1_TCPC_RST_L,		PIN(F, 0), GPIO_OUT_HIGH)			/* C1 TCPC Reset */
-GPIO(USB_C0_DP_HPD,		PIN(F, 5), GPIO_OUT_LOW)			/* C0 DP Hotplug Detect */
-GPIO(USB_C1_DP_HPD,		PIN(C, 1), GPIO_OUT_LOW)			/* C1 DP Hotplug Detect */
+GPIO(USB_C0_HPD,		PIN(F, 5), GPIO_OUT_LOW)			/* C0 DP Hotplug Detect */
+GPIO(DP2_HPD,			PIN(C, 1), GPIO_OUT_LOW)			/* C1 DP Hotplug Detect */
 
 GPIO(LED_FULL_L,		PIN(6, 0), GPIO_OUT_HIGH)
 GPIO(LED_CHRG_L,		PIN(C, 0), GPIO_OUT_HIGH)
@@ -56,8 +56,8 @@ IOEX(KB_BL_EN,			EXPIN(USBC_PORT_C0, 1, 3), GPIO_OUT_LOW)	/* KB Backlight Enable
 IOEX(EN_USB_A0_5V,		EXPIN(USBC_PORT_C0, 1, 5), GPIO_OUT_LOW)	/* A0 5V Source Enable */
 IOEX(USB_A0_CHARGE_EN_L,	EXPIN(USBC_PORT_C0, 1, 6), GPIO_OUT_HIGH)	/* A0 5V High Current Enable */
 
-IOEX(EN_USB_A1_5V,		EXPIN(USBC_PORT_C1, 1, 6), GPIO_OUT_LOW)	/* A1 5V Source Enable */
-IOEX(USB_A1_CHARGE_EN_L,	EXPIN(USBC_PORT_C1, 1, 7), GPIO_OUT_HIGH)	/* A1 5V High Current Enable */
+IOEX(EN_USB_A1_5V_DB,		EXPIN(USBC_PORT_C1, 1, 6), GPIO_OUT_LOW)	/* A1 5V Source Enable */
+IOEX(USB_A1_CHARGE_EN_DB_L,	EXPIN(USBC_PORT_C1, 1, 7), GPIO_OUT_HIGH)	/* A1 5V High Current Enable */
 
 /*
  * The NPCX LPC driver configures and controls SCI, so PCH_SCI_ODL [PIN(7, 6)]
@@ -65,22 +65,22 @@ IOEX(USB_A1_CHARGE_EN_L,	EXPIN(USBC_PORT_C1, 1, 7), GPIO_OUT_HIGH)	/* A1 5V High
  */
 
 /* I2C pins - these will be reconfigured for alternate function below */
-GPIO(I2C0_SCL,			PIN(B, 5), GPIO_INPUT)				/* EC_I2C_USB_A0_C0_SCL */
-GPIO(I2C0_SDA,			PIN(B, 4), GPIO_INPUT)				/* EC_I2C_USB_A0_C0_SDA */
-GPIO(I2C1_SCL,			PIN(9, 0), GPIO_INPUT)				/* EC_I2C_USB_A1_C1_SCL */
-GPIO(I2C1_SDA,			PIN(8, 7), GPIO_INPUT)				/* EC_I2C_USB_A1_C1_SDA */
-GPIO(I2C2_SCL,			PIN(9, 2), GPIO_INPUT)				/* EC_I2C_POWER_CBI_SCL */
-GPIO(I2C2_SDA,			PIN(9, 1), GPIO_INPUT)				/* EC_I2C_POWER_CBI_SDA */
-GPIO(I2C3_SCL,			PIN(D, 1), GPIO_INPUT)				/* EC_I2C_USBC_AP_MUX_SCL */
-GPIO(I2C3_SDA,			PIN(D, 0), GPIO_INPUT)				/* EC_I2C_USBC_AP_MUX_SDA */
-GPIO(I2C4_SCL,			PIN(F, 3), GPIO_INPUT)				/* FCH_SIC */
-GPIO(I2C4_SDA,			PIN(F, 2), GPIO_INPUT)				/* FCH_SID */
-GPIO(I2C5_SCL,			PIN(3, 3), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SCL */
-GPIO(I2C5_SDA,			PIN(3, 6), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SDA */
-GPIO(I2C6_SCL,			PIN(E, 4), GPIO_INPUT | GPIO_SEL_1P8V)		/* FCH_I2C_AUDIO_SCL */
-GPIO(I2C6_SDA,			PIN(E, 3), GPIO_INPUT | GPIO_SEL_1P8V)		/* FCH_I2C_AUDIO_SDA */
-GPIO(I2C7_SCL,			PIN(B, 3), GPIO_INPUT)				/* FCH_I2C_HDMI_HUB_3V3_SCL */
-GPIO(I2C7_SDA,			PIN(B, 2), GPIO_INPUT)				/* FCH_I2C_HDMI_HUB_3V3_SDA */
+GPIO(EC_I2C_USB_A0_C0_SCL,	PIN(B, 5), GPIO_INPUT)
+GPIO(EC_I2C_USB_A0_C0_SDA,	PIN(B, 4), GPIO_INPUT)
+GPIO(EC_I2C_USB_A1_C1_SCL,	PIN(9, 0), GPIO_INPUT)
+GPIO(EC_I2C_USB_A1_C1_SDA,	PIN(8, 7), GPIO_INPUT)
+GPIO(EC_I2C_POWER_CBI_SCL,	PIN(9, 2), GPIO_INPUT)
+GPIO(EC_I2C_POWER_CBI_SDA,	PIN(9, 1), GPIO_INPUT)
+GPIO(EC_I2C_USBC_AP_MUX_SCL,	PIN(D, 1), GPIO_INPUT)
+GPIO(EC_I2C_USBC_AP_MUX_SDA,	PIN(D, 0), GPIO_INPUT)
+GPIO(FCH_SIC,			PIN(F, 3), GPIO_INPUT)
+GPIO(FCH_SID,			PIN(F, 2), GPIO_INPUT)
+GPIO(EC_I2C_SENSOR_SCL,		PIN(3, 3), GPIO_INPUT | GPIO_SEL_1P8V)
+GPIO(EC_I2C_SENSOR_SDA,		PIN(3, 6), GPIO_INPUT | GPIO_SEL_1P8V)
+GPIO(FCH_I2C_AUDIO_SCL,		PIN(E, 4), GPIO_INPUT | GPIO_SEL_1P8V)
+GPIO(FCH_I2C_AUDIO_SDA,		PIN(E, 3), GPIO_INPUT | GPIO_SEL_1P8V)
+GPIO(FCH_I2C_HDMI_HUB_3V3_SCL,	PIN(B, 3), GPIO_INPUT)
+GPIO(FCH_I2C_HDMI_HUB_3V3_SDA,	PIN(B, 2), GPIO_INPUT)
 
 ALTERNATE(PIN_MASK(6, BIT(4) | BIT(5)), 0, MODULE_UART, 0) /* Cr50 requires no pullups. */
 
@@ -103,7 +103,7 @@ ALTERNATE(PIN_MASK(4, BIT(0)), 0, MODULE_PWM, 0)				/* TA1 - EC_FAN_SPEED */
 ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_00-01 */
 ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_02-07 */
 ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_00-01 */
-GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW)						/* KSO_02 inverted */
+GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW)					/* KSO_02 inverted */
 ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_03-09 */
 ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_10-12 */