voxel: Initial EC image

Create the initial EC image for the voxel variant by copying the
volteer reference board EC files into a new directory named for
the variant.

(Auto-Generated by create_initial_ec_image.sh version 1.0.2).

BUG=b:157879197
BRANCH=none
TEST=make BOARD=voxel

Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I93a9c897df25c5700ac4f321510745b104cdb41b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2224681
Reviewed-by: Keith Short <keithshort@chromium.org>
Tested-by: Paul Fagerburg <pfagerburg@chromium.org>

1 files changed, 222 insertions, 0 deletions

diff --git a/board/voxel/board.c b/board/voxel/board.c
new file mode 100644
index 0000000000..89eda9c0e8
--- /dev/null
+++ b/board/voxel/board.c
@@ -0,0 +1,222 @@
+/* Copyright 2020 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Volteer board-specific configuration */
+
+#include "button.h"
+#include "common.h"
+#include "accelgyro.h"
+#include "driver/accel_bma2x2.h"
+#include "driver/accelgyro_bmi260.h"
+#include "driver/als_tcs3400.h"
+#include "driver/retimer/bb_retimer.h"
+#include "driver/sync.h"
+#include "extpower.h"
+#include "fan.h"
+#include "fan_chip.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "lid_switch.h"
+#include "power.h"
+#include "power_button.h"
+#include "pwm.h"
+#include "pwm_chip.h"
+#include "switch.h"
+#include "system.h"
+#include "task.h"
+#include "tablet_mode.h"
+#include "throttle_ap.h"
+#include "uart.h"
+#include "usb_pd_tbt.h"
+#include "util.h"
+
+#include "gpio_list.h" /* Must come after other header files. */
+
+#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
+
+/*
+ * Reconfigure Volteer GPIOs based on the board ID
+ */
+__override void config_volteer_gpios(void)
+{
+	/* Legacy support for the first board build */
+	if (get_board_id() == 0) {
+		CPRINTS("Configuring GPIOs for board ID 0");
+		CPRINTS("VOLUME_UP button disabled");
+
+		/* Reassign USB_C1_RT_RST_ODL */
+		bb_controls[USBC_PORT_C1].retimer_rst_gpio =
+			GPIO_USB_C1_RT_RST_ODL_BOARDID_0;
+		ps8xxx_rst_odl = GPIO_USB_C1_RT_RST_ODL_BOARDID_0;
+	}
+}
+
+static void board_init(void)
+{
+	/* Illuminate motherboard and daughter board LEDs equally to start. */
+	pwm_enable(PWM_CH_LED4_SIDESEL, 1);
+	pwm_set_duty(PWM_CH_LED4_SIDESEL, 50);
+}
+DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
+
+__override enum tbt_compat_cable_speed board_get_max_tbt_speed(int port)
+{
+	/* Routing length exceeds 205mm prior to connection to re-timer */
+	if (port == USBC_PORT_C1)
+		return TBT_SS_U32_GEN1_GEN2;
+
+	/*
+	 * Thunderbolt-compatible mode not supported
+	 *
+	 * TODO (b/147726366): All the USB-C ports need to support same speed.
+	 * Need to fix once USB-C feature set is known for Volteer.
+	 */
+	return TBT_SS_RES_0;
+}
+
+__override bool board_is_tbt_usb4_port(int port)
+{
+	/*
+	 * On Proto-1 only Port 1 supports TBT & USB4
+	 *
+	 * TODO (b/147732807): All the USB-C ports need to support same
+	 * features. Need to fix once USB-C feature set is known for Volteer.
+	 */
+	return port == USBC_PORT_C1;
+}
+
+/******************************************************************************/
+/* Physical fans. These are logically separate from pwm_channels. */
+
+const struct fan_conf fan_conf_0 = {
+	.flags = FAN_USE_RPM_MODE,
+	.ch = MFT_CH_0,	/* Use MFT id to control fan */
+	.pgood_gpio = -1,
+	.enable_gpio = GPIO_EN_PP5000_FAN,
+};
+
+/*
+ * Fan specs from datasheet:
+ * Max speed 5900 rpm (+/- 7%), minimum duty cycle 30%.
+ * Minimum speed not specified by RPM. Set minimum RPM to max speed (with
+ * margin) x 30%.
+ *    5900 x 1.07 x 0.30 = 1894, round up to 1900
+ */
+const struct fan_rpm fan_rpm_0 = {
+	.rpm_min = 1900,
+	.rpm_start = 1900,
+	.rpm_max = 5900,
+};
+
+const struct fan_t fans[FAN_CH_COUNT] = {
+	[FAN_CH_0] = {
+		.conf = &fan_conf_0,
+		.rpm = &fan_rpm_0,
+	},
+};
+
+/******************************************************************************/
+/* MFT channels. These are logically separate from pwm_channels. */
+const struct mft_t mft_channels[] = {
+	[MFT_CH_0] = {
+		.module = NPCX_MFT_MODULE_1,
+		.clk_src = TCKC_LFCLK,
+		.pwm_id = PWM_CH_FAN,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
+
+/******************************************************************************/
+/* I2C port map configuration */
+const struct i2c_port_t i2c_ports[] = {
+	{
+		.name = "sensor",
+		.port = I2C_PORT_SENSOR,
+		.kbps = 400,
+		.scl = GPIO_EC_I2C0_SENSOR_SCL,
+		.sda = GPIO_EC_I2C0_SENSOR_SDA,
+	},
+	{
+		.name = "usb_c0",
+		.port = I2C_PORT_USB_C0,
+		.kbps = 1000,
+		.scl = GPIO_EC_I2C1_USB_C0_SCL,
+		.sda = GPIO_EC_I2C1_USB_C0_SDA,
+	},
+	{
+		.name = "usb_c1",
+		.port = I2C_PORT_USB_C1,
+		.kbps = 1000,
+		.scl = GPIO_EC_I2C2_USB_C1_SCL,
+		.sda = GPIO_EC_I2C2_USB_C1_SDA,
+	},
+	{
+		.name = "usb_1_mix",
+		.port = I2C_PORT_USB_1_MIX,
+		.kbps = 100,
+		.scl = GPIO_EC_I2C3_USB_1_MIX_SCL,
+		.sda = GPIO_EC_I2C3_USB_1_MIX_SDA,
+	},
+	{
+		.name = "power",
+		.port = I2C_PORT_POWER,
+		.kbps = 100,
+		.scl = GPIO_EC_I2C5_POWER_SCL,
+		.sda = GPIO_EC_I2C5_POWER_SDA,
+	},
+	{
+		.name = "eeprom",
+		.port = I2C_PORT_EEPROM,
+		.kbps = 400,
+		.scl = GPIO_EC_I2C7_EEPROM_SCL,
+		.sda = GPIO_EC_I2C7_EEPROM_SDA,
+	},
+};
+const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
+
+/******************************************************************************/
+/* PWM configuration */
+const struct pwm_t pwm_channels[] = {
+	[PWM_CH_LED1_BLUE] = {
+		.channel = 2,
+		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
+		.freq = 2400,
+	},
+	[PWM_CH_LED2_GREEN] = {
+		.channel = 0,
+		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
+		.freq = 2400,
+	},
+	[PWM_CH_LED3_RED] = {
+		.channel = 1,
+		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
+		.freq = 2400,
+	},
+	[PWM_CH_LED4_SIDESEL] = {
+		.channel = 7,
+		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
+		/* Run at a higher frequency than the color PWM signals to avoid
+		 * timing-based color shifts.
+		 */
+		.freq = 4800,
+	},
+	[PWM_CH_FAN] = {
+		.channel = 5,
+		.flags = PWM_CONFIG_OPEN_DRAIN,
+		.freq = 25000
+	},
+	[PWM_CH_KBLIGHT] = {
+		.channel = 3,
+		.flags = 0,
+		/*
+		 * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
+		 * flicker. Higher frequencies consume similar average power to
+		 * lower PWM frequencies, but higher frequencies record a much
+		 * lower maximum power.
+		 */
+		.freq = 2400,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);