diff options
author | Furquan Shaikh <furquan@chromium.org> | 2017-10-25 13:49:34 -0700 |
---|---|---|
committer | chrome-bot <chrome-bot@chromium.org> | 2017-10-26 15:57:48 -0700 |
commit | 2d06b37e0efb781f5b12ae1fb794b832fd93fbcf (patch) | |
tree | 37408bb94b81c82ea93131906d71899f6a4a23ef /board | |
parent | 9442982a9b4a9e5500cb57499a3aa7665354277d (diff) | |
download | chrome-ec-2d06b37e0efb781f5b12ae1fb794b832fd93fbcf.tar.gz |
soraka: Revive battery while coming out of disconnect
If charge and discharge FETs are both disabled, then try reviving the
battery by sending 0x23a7 using manufacturer access. This is
required to get the battery out of emergency shutdown mode which is
entered upon hardware battery cut-off.
BUG=b:68044490
BRANCH=None
TEST=Verified that hardware and software based battery cut-off work as
expected. Device boots up fine on connecting AC power.
Change-Id: I1aed44c50e80b74b7b19c9808f465273bfd7b0da
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/738643
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Diffstat (limited to 'board')
-rw-r--r-- | board/poppy/battery.c | 51 |
1 files changed, 50 insertions, 1 deletions
diff --git a/board/poppy/battery.c b/board/poppy/battery.c index 63006b2bed..10a0a52a35 100644 --- a/board/poppy/battery.c +++ b/board/poppy/battery.c @@ -14,11 +14,14 @@ #include "gpio.h" #include "util.h" +#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args) + static enum battery_present batt_pres_prev = BP_NOT_SURE; /* Shutdown mode parameter to write to manufacturer access register */ #define SB_SHIP_MODE_REG SB_MANUFACTURER_ACCESS -#define SB_SHUTDOWN_DATA 0x0010 +#define SB_SHUTDOWN_DATA 0x0010 +#define SB_REVIVE_DATA 0x23a7 #ifdef BOARD_SORAKA static const struct battery_info info = { @@ -160,6 +163,47 @@ static int battery_check_disconnect(void) return BATTERY_NOT_DISCONNECTED; } +#ifdef BOARD_SORAKA +/* + * In case of soraka, battery enters an "emergency shutdown" mode when hardware + * button combo is used to cutoff battery. In order to get out of this mode, EC + * needs to send SB_REVIVE_DATA. + * + * Do not send revive data if: + * 1. It has already been sent during this boot or + * 2. Battery was/is in a state other than "BATTERY_DISCONNECTED". + * + * Try upto ten times to send the revive data command and if it fails every + * single time, give up and continue booting on AC power. + */ +static void battery_revive(void) +{ +#define MAX_REVIVE_TRIES 10 + static int battery_revive_done; + int tries = MAX_REVIVE_TRIES; + + if (battery_revive_done) + return; + + battery_revive_done = 1; + + while (tries--) { + if (battery_check_disconnect() != BATTERY_DISCONNECTED) + return; + + CPRINTS("Battery is disconnected! Try#%d to revive", + MAX_REVIVE_TRIES - tries); + + if (sb_write(SB_MANUFACTURER_ACCESS, SB_REVIVE_DATA) == + EC_SUCCESS) + return; + } + + if (battery_check_disconnect() == BATTERY_DISCONNECTED) + CPRINTS("Battery is still disconnected! Giving up!"); +} +#endif + enum battery_present battery_is_present(void) { enum battery_present batt_pres; @@ -167,6 +211,11 @@ enum battery_present battery_is_present(void) /* Get the physical hardware status */ batt_pres = battery_hw_present(); +#ifdef BOARD_SORAKA + if (batt_pres) + battery_revive(); +#endif + /* * Make sure battery status is implemented, I2C transactions are * success & the battery status is Initialized to find out if it |