diff options
author | Diana Z <dzigterman@chromium.org> | 2018-08-16 09:42:24 -0600 |
---|---|---|
committer | chrome-bot <chrome-bot@chromium.org> | 2018-08-21 05:47:58 -0700 |
commit | b042e8ef06ccea5afa33134f37b16b1f61c7f84c (patch) | |
tree | ba89d013cbed8609c6c531358bf64c122d1e9042 /board | |
parent | 3f19d870f81f062410e30d166848d47a2a20e5d9 (diff) | |
download | chrome-ec-b042e8ef06ccea5afa33134f37b16b1f61c7f84c.tar.gz |
Fleex: Update EC GPIOs for Fleex EVT
This change sets GPIO83 to the new USB_C0_PD_RST. The GPIO flags are
set according to whether the board is a proto (where it is acting as
USB_OTG and needs to be open drain) or EVT (where it is an active-high
signal). This also adds CAM_SOC_EC_SYNC as an input for now.
BRANCH=None
BUG=b:112458646
TEST=Loaded onto fleex proto to verify proto board was detected and
USB_OTG set to open drain
Change-Id: Iffa4762f46d545a0431a27f2c1893f219695d367
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1180354
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Diffstat (limited to 'board')
-rw-r--r-- | board/fleex/board.c | 30 | ||||
-rw-r--r-- | board/fleex/gpio.inc | 15 |
2 files changed, 38 insertions, 7 deletions
diff --git a/board/fleex/board.c b/board/fleex/board.c index 9a794c518a..11564aa73d 100644 --- a/board/fleex/board.c +++ b/board/fleex/board.c @@ -243,3 +243,33 @@ void lid_angle_peripheral_enable(int enable) keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); } #endif + +/* + * Set gpio flags based on board ID, can be removed when proto is no longer + * supported + */ +static void update_gpios_from_board_id(void) +{ + uint32_t board_id = 0; + + /* Errors will count as board_id 0 */ + cbi_get_board_version(&board_id); + + if (board_id == 0) { + /* + * USB2_OTG_ID is a 1.8V pin on the SoC side with an internal + * pull-up. However, it is 3.3V on the EC side. So, configure + * it as ODR so that the EC never drives it high. + */ + gpio_set_flags(GPIO_USB_C0_PD_RST, GPIO_ODR_LOW); + } else { + int flags = GPIO_OUTPUT; + + if (!system_is_reboot_warm() && !system_jumped_to_this_image()) + flags |= GPIO_LOW; + + gpio_set_flags(GPIO_USB_C0_PD_RST, flags); + } +} + +DECLARE_HOOK(HOOK_INIT, update_gpios_from_board_id, HOOK_PRIO_INIT_I2C + 1); diff --git a/board/fleex/gpio.inc b/board/fleex/gpio.inc index 4170c84ee2..3b340a8a64 100644 --- a/board/fleex/gpio.inc +++ b/board/fleex/gpio.inc @@ -101,6 +101,13 @@ GPIO(EN_USB_A0_5V, PIN(6, 7), GPIO_OUT_LOW) /* Enable A0 5V Charging */ GPIO(EN_USB_A1_5V, PIN(9, 6), GPIO_OUT_LOW) /* Enable A1 5V Charging */ GPIO(USB_A0_CHARGE_EN_L, PIN(A, 2), GPIO_OUT_HIGH) /* Enable A0 1.5A Charging */ GPIO(USB_A1_CHARGE_EN_L, PIN(A, 0), GPIO_OUT_HIGH) /* Enable A1 1.5A Charging */ +/* + * TODO(b/112756630): octopus: add reset logic for C0 TCPC + * + * Proto USB2_OTG_ID pin + * Configure as default since on proto boards this pin should not be driven high + */ +GPIO(USB_C0_PD_RST, PIN(8, 3), GPIO_DEFAULT) /* C0 PD Reset */ GPIO(USB_C0_BC12_VBUS_ON, PIN(6, 3), GPIO_OUT_LOW) /* C0 BC1.2 Power */ GPIO(USB_C0_BC12_CHG_DET_L, PIN(9, 5), GPIO_INPUT) /* C0 BC1.2 Detect */ GPIO(USB_C0_HPD_1V8_ODL, PIN(C, 5), GPIO_INPUT | /* C0 DP Hotplug Detect */ @@ -111,13 +118,6 @@ GPIO(USB_C1_BC12_CHG_DET_L, PIN(E, 4), GPIO_INPUT) /* C1 BC1.2 Detect */ GPIO(USB_C1_HPD_1V8_ODL, PIN(C, 6), GPIO_INPUT | /* C1 DP Hotplug Detect */ GPIO_SEL_1P8V) -/* - * USB2_OTG_ID is 1.8V pin on the SoC side with an internal pull-up. However, it - * 3.3V on the EC side. So, configure it as ODR so that the EC never drives it - * high. - */ -GPIO(USB2_OTG_ID, PIN(8, 3), GPIO_ODR_LOW) /* OTG ID */ - /* LED */ GPIO(LED_1_PWR_WHITE_L, PIN(C, 3), GPIO_OUT_HIGH) GPIO(LED_2_CHG_AMBER_L, PIN(C, 4), GPIO_OUT_HIGH) @@ -127,6 +127,7 @@ GPIO(KB_BL_PWR_EN, PIN(6, 2), GPIO_OUT_LOW) /* Camera */ GPIO(WFCAM_VSYNC, PIN(0, 3), GPIO_INPUT) /* TP only */ +GPIO(CAM_SOC_EC_SYNC, PIN(9, 4), GPIO_INPUT) /* Proto: NC WoV pin */ /* Keyboard pins */ ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */ |