diff options
| author | Yen Lin <yelin@nvidia.com> | 2013-07-01 13:28:31 -0700 |
|---|---|---|
| committer | ChromeBot <chrome-bot@google.com> | 2013-07-03 14:22:19 -0700 |
| commit | 6b5fcc6931f99c23f20fed3c5b7fdc2d6c7a2f9e (patch) | |
| tree | a6cccc53bbbadf32b4bb9b15445041a2ba88992d /chip | |
| parent | 85a1941f9d166f964e5369e676378bfc7e5a0b4b (diff) | |
| download | chrome-ec-6b5fcc6931f99c23f20fed3c5b7fdc2d6c7a2f9e.tar.gz | |
ec: Add Puppy support to generic/common files
add #ifdefs needed to support Puppy board in generic/common files
BUG=none
TEST=tested on Venice board
Change-Id: I46592010cb5dfcc40db312c746f1e0d2886b3758
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/60688
Reviewed-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Diffstat (limited to 'chip')
| -rw-r--r-- | chip/stm32/power_led.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/chip/stm32/power_led.c b/chip/stm32/power_led.c index 5c4a92c86f..4e33e239f1 100644 --- a/chip/stm32/power_led.c +++ b/chip/stm32/power_led.c @@ -49,7 +49,7 @@ static void power_led_set_duty(int percent) * Set the duty cycle. CCRx = percent * ARR / 100. Since we set * ARR=100, this is just percent. */ -#ifdef BOARD_pit +#if defined(BOARD_pit) || defined(BOARD_puppy) STM32_TIM_CCR3(TIM_POWER_LED) = percent; #else STM32_TIM_CCR2(TIM_POWER_LED) = percent; @@ -59,7 +59,7 @@ static void power_led_set_duty(int percent) static void power_led_use_pwm(void) { /* Configure power LED GPIO for TIM2/PWM alternate function */ -#ifdef BOARD_pit +#if defined(BOARD_pit) || defined(BOARD_puppy) /* PA2 = TIM2_CH3 */ gpio_set_alternate_function(GPIO_A, (1 << 2), GPIO_ALT_TIM2); #else @@ -87,7 +87,7 @@ static void power_led_use_pwm(void) power_led_set_duty(100); -#ifdef BOARD_pit +#if defined(BOARD_pit) || defined(BOARD_puppy) /* CC3 configured as output, PWM mode 1, preload enable */ STM32_TIM_CCMR2(TIM_POWER_LED) = (6 << 4) | (1 << 3); |