samus: fix charge state machine's handling of low power chargers

On samus it is possible to have AC plugged in but have the battery
discharging. So, add a new variable to charge state machine for
battery charging status and use that where necessary. For example,
the low battery shutdown code should now be based on whether or
not battery is charging rather than if AC is present.

This also changes the hibernate behavior when battery is low. The
change is to wait 30 seconds in G3 of low battery with no charging
before hibernating because for some chargers, like a USB PD charger,
the charger may increase it's current limit after a little bit of
time.

BUG=chrome-os-partner:34485
BRANCH=samus
TEST=test on samus. use low power charger and make sure that
ectool battery shows the "DISCHARGING" flag. use zinger and see
"CHARGING" flag. also use power_supply_info to make sure that
the battery state accurately reflects reality.

Change-Id: I8ac0267dd393071c4ca1fa24fbc9a13bf27848a9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/235491
Reviewed-by: Bill Richardson <wfrichar@chromium.org>

1 files changed, 29 insertions, 29 deletions

diff --git a/common/charge_state_v2.c b/common/charge_state_v2.c
index 2346ddd131..74d8e910f5 100644
--- a/common/charge_state_v2.c
+++ b/common/charge_state_v2.c
@@ -200,17 +200,8 @@ static void update_dynamic_battery_info(void)
 	    curr.batt.state_of_charge <= BATTERY_LEVEL_CRITICAL)
 		tmp |= EC_BATT_FLAG_LEVEL_CRITICAL;
 
-	switch (curr.state) {
-	case ST_DISCHARGE:
-		tmp |= EC_BATT_FLAG_DISCHARGING;
-		break;
-	case ST_CHARGE:
-		tmp |= EC_BATT_FLAG_CHARGING;
-		break;
-	default:
-		/* neither charging nor discharging */
-		break;
-	}
+	tmp |= curr.batt_is_charging ? EC_BATT_FLAG_CHARGING :
+				       EC_BATT_FLAG_DISCHARGING;
 
 	/* Tell the AP to re-read battery status if charge state changes */
 	if (*memmap_flags != tmp)
@@ -237,6 +228,7 @@ static void dump_charge_state(void)
 #define DUMP_BATT(FLD, FMT) ccprintf("\t" #FLD " = " FMT "\n", curr.batt. FLD)
 	ccprintf("state = %s\n", state_list[curr.state]);
 	DUMP(ac, "%d");
+	DUMP(batt_is_charging, "%d");
 	ccprintf("chg.*:\n");
 	DUMP_CHG(voltage, "%dmV");
 	DUMP_CHG(current, "%dmA");
@@ -272,8 +264,7 @@ static void show_charging_progress(void)
 {
 	int rv, minutes, to_full;
 
-	if (curr.state == ST_IDLE ||
-	    curr.state == ST_DISCHARGE) {
+	if (!curr.batt_is_charging) {
 		rv = battery_time_to_empty(&minutes);
 		to_full = 0;
 	} else {
@@ -414,7 +405,7 @@ static inline int battery_too_low(void)
 /* Shut everything down before the battery completely dies. */
 static void prevent_deep_discharge(void)
 {
-	if (!battery_too_low()) {
+	if (!battery_too_low() || curr.batt_is_charging) {
 		/* Reset shutdown warning time */
 		shutdown_warning_time.val = 0;
 		return;
@@ -423,22 +414,24 @@ static void prevent_deep_discharge(void)
 	CPRINTS("Low battery: %d%%, %dmV",
 		curr.batt.state_of_charge, curr.batt.voltage);
 
-	if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
-#ifdef CONFIG_HIBERNATE
-		/* AP is off, so shut down the EC now */
-		CPRINTS("charge force EC hibernate due to low battery");
-		system_hibernate(0, 0);
-#endif
-	} else if (!shutdown_warning_time.val) {
-		/* Warn AP battery level is so low we'll shut down */
+	if (!shutdown_warning_time.val) {
 		CPRINTS("charge warn shutdown due to low battery");
 		shutdown_warning_time = get_time();
-		host_set_single_event(EC_HOST_EVENT_BATTERY_SHUTDOWN);
+		if (!chipset_in_state(CHIPSET_STATE_ANY_OFF))
+			host_set_single_event(EC_HOST_EVENT_BATTERY_SHUTDOWN);
 	} else if (get_time().val > shutdown_warning_time.val +
 		   LOW_BATTERY_SHUTDOWN_TIMEOUT_US) {
-		/* Timeout waiting for AP to shut down, so kill it */
-		CPRINTS("charge force shutdown due to low battery");
-		chipset_force_shutdown();
+		if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
+#ifdef CONFIG_HIBERNATE
+			/* Timeout waiting for charger to provide more power */
+			CPRINTS("charge force EC hibernate due to low battery");
+			system_hibernate(0, 0);
+#endif
+		} else {
+			/* Timeout waiting for AP to shut down, so kill it */
+			CPRINTS("charge force shutdown due to low battery");
+			chipset_force_shutdown();
+		}
 	}
 }
 
@@ -574,11 +567,18 @@ void charger_task(void)
 		if (curr.batt.flags & BATT_FLAG_BAD_ANY)
 			problem(PR_BATT_FLAGS, curr.batt.flags);
 
+		/*
+		 * If AC is present, check if input current is sufficient to
+		 * actually charge battery.
+		 */
+		curr.batt_is_charging = curr.ac && (curr.batt.current >= 0);
+
+		/* Don't let the battery hurt itself. */
+		prevent_hot_discharge();
+		prevent_deep_discharge();
+
 		if (!curr.ac) {
 			curr.state = ST_DISCHARGE;
-			/* Don't let the battery hurt itself. */
-			prevent_hot_discharge();
-			prevent_deep_discharge();
 			goto wait_for_it;
 		}