diff options
author | Randall Spangler <rspangler@chromium.org> | 2015-01-28 15:23:55 -0800 |
---|---|---|
committer | ChromeOS Commit Bot <chromeos-commit-bot@chromium.org> | 2015-02-05 19:41:41 +0000 |
commit | fd6a6900f786d47fc5364f9013356a741da5c113 (patch) | |
tree | b701989e3564488dceb5ef965a1123aad22adcb9 /common/motion_lid.c | |
parent | df28140cc81bc87b4a278a2876db2c52158996c6 (diff) | |
download | chrome-ec-fd6a6900f786d47fc5364f9013356a741da5c113.tar.gz |
Convert motion sense calculations to fixed point.
Motion sense calculations do not require huge amounts of precision, so
fixed point is plenty accurate. And fixed point works on Cortex-M0,
which lacks a FPU.
BUG=chrome-os-partner:36126
BRANCH=minnie (samus already works with the FPU, but could grab this if we
want additional testing)
TEST=manual
1. Boot system
2. At EC console: accelinfo on 250
3. Move lid through several different angles (30 degrees to max open) and
see that it updates correctly and relatively smoothly. A few degrees
of angle jitter is normal.
4. At several angles, rotate the chromebook around and see that the lid
angle remains relatively stable.
5. If the hinge is made normal to the ground (or within 15 degrees of
vertical), the angle should read 500, since the acceleration vectors
don't yield good results in that orientation (for either fixed or float
math).
And run 'make buildall -j', which tests arc_cos() and lid angle calculations
Change-Id: I70a0d08b8914629a3e21ae5578cbe8e50f29ad68
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/244116
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Diffstat (limited to 'common/motion_lid.c')
-rw-r--r-- | common/motion_lid.c | 63 |
1 files changed, 33 insertions, 30 deletions
diff --git a/common/motion_lid.c b/common/motion_lid.c index 4b991dee6b..0dfb8763d7 100644 --- a/common/motion_lid.c +++ b/common/motion_lid.c @@ -32,7 +32,7 @@ enum { }; /* Current acceleration vectors and current lid angle. */ -static float lid_angle_deg; +static int lid_angle_deg; static int lid_angle_is_reliable; /* @@ -41,7 +41,7 @@ static int lid_angle_is_reliable; * efficiency, value is given unit-less, so if you want the threshold to be * at 15 degrees, the value would be cos(15 deg) = 0.96593. */ -#define HINGE_ALIGNED_WITH_GRAVITY_THRESHOLD 0.96593F +#define HINGE_ALIGNED_WITH_GRAVITY_THRESHOLD FLOAT_TO_FP(0.96593) /* Pointer to constant acceleration orientation data. */ @@ -61,11 +61,12 @@ struct motion_sensor_t *accel_lid = &motion_sensors[CONFIG_SENSOR_LID]; * @return flag representing if resulting lid angle calculation is reliable. */ static int calculate_lid_angle(const vector_3_t base, const vector_3_t lid, - float *lid_angle) + int *lid_angle) { vector_3_t v; - float ang_lid_to_base, ang_lid_90, ang_lid_270; - float lid_to_base, base_to_hinge; + fp_t ang_lid_to_base, cos_lid_90, cos_lid_270; + fp_t lid_to_base, base_to_hinge; + fp_t denominator; int reliable = 1; /* @@ -82,64 +83,66 @@ static int calculate_lid_angle(const vector_3_t base, const vector_3_t lid, * If hinge aligns too closely with gravity, then result may be * unreliable. */ - if (ABS(base_to_hinge) > HINGE_ALIGNED_WITH_GRAVITY_THRESHOLD) + if (fp_abs(base_to_hinge) > HINGE_ALIGNED_WITH_GRAVITY_THRESHOLD) reliable = 0; - base_to_hinge = SQ(base_to_hinge); + base_to_hinge = fp_sq(base_to_hinge); /* Check divide by 0. */ - if (ABS(1.0F - base_to_hinge) < 0.01F) { - *lid_angle = 0.0; + denominator = FLOAT_TO_FP(1.0) - base_to_hinge; + if (fp_abs(denominator) < FLOAT_TO_FP(0.01)) { + *lid_angle = 0; return 0; } - ang_lid_to_base = arc_cos( - (lid_to_base - base_to_hinge) / (1 - base_to_hinge)); + ang_lid_to_base = arc_cos(fp_div(lid_to_base - base_to_hinge, + denominator)); /* * The previous calculation actually has two solutions, a positive and * a negative solution. To figure out the sign of the answer, calculate - * the angle between the actual lid angle and the estimated vector if - * the lid were open to 90 deg, ang_lid_90. Also calculate the angle - * between the actual lid angle and the estimated vector if the lid - * were open to 270 deg, ang_lid_270. The smaller of the two angles - * represents which one is closer. If the lid is closer to the - * estimated 270 degree vector then the result is negative, otherwise - * it is positive. + * the cosine of the angle between the actual lid angle and the + * estimated vector if the lid were open to 90 deg, cos_lid_90. Also + * calculate the cosine of the angle between the actual lid angle and + * the estimated vector if the lid were open to 270 deg, + * cos_lid_270. The smaller of the two angles represents which one is + * closer. If the lid is closer to the estimated 270 degree vector then + * the result is negative, otherwise it is positive. */ rotate(base, p_acc_orient->rot_hinge_90, v); - ang_lid_90 = cosine_of_angle_diff(v, lid); + cos_lid_90 = cosine_of_angle_diff(v, lid); rotate(v, p_acc_orient->rot_hinge_180, v); - ang_lid_270 = cosine_of_angle_diff(v, lid); + cos_lid_270 = cosine_of_angle_diff(v, lid); /* - * Note that ang_lid_90 and ang_lid_270 are not in degrees, because + * Note that cos_lid_90 and cos_lid_270 are not in degrees, because * the arc_cos() was never performed. But, since arc_cos() is * monotonically decreasing, we can do this comparison without ever * taking arc_cos(). But, since the function is monotonically * decreasing, the logic of this comparison is reversed. */ - if (ang_lid_270 > ang_lid_90) + if (cos_lid_270 > cos_lid_90) ang_lid_to_base = -ang_lid_to_base; /* Place lid angle between 0 and 360 degrees. */ if (ang_lid_to_base < 0) - ang_lid_to_base += 360; + ang_lid_to_base += FLOAT_TO_FP(360); + + /* + * Round to nearest int by adding 0.5. Note, only works because lid + * angle is known to be positive. + */ + *lid_angle = FP_TO_INT(ang_lid_to_base + FLOAT_TO_FP(0.5)); - *lid_angle = ang_lid_to_base; return reliable; } int motion_lid_get_angle(void) { if (lid_angle_is_reliable) - /* - * Round to nearest int by adding 0.5. Note, only works because - * lid angle is known to be positive. - */ - return (int)(lid_angle_deg + 0.5F); + return lid_angle_deg; else - return (int)LID_ANGLE_UNRELIABLE; + return LID_ANGLE_UNRELIABLE; } /* |