diff options
author | Dossym Nurmukhanov <dossym@google.com> | 2021-01-09 05:39:41 +0000 |
---|---|---|
committer | Commit Bot <commit-bot@chromium.org> | 2021-01-11 18:44:01 +0000 |
commit | 53103cee5a0a75eaf47c43c45cda83ddd71079ea (patch) | |
tree | 68691e4473d643fb4c43a62a9cbabfd628713b26 /common | |
parent | 0b8aaed16b14c0d3b6b86db4c6383cb6818c898a (diff) | |
download | chrome-ec-53103cee5a0a75eaf47c43c45cda83ddd71079ea.tar.gz |
COIL: Rename non-inclusive wording
Use controller/peripheral nomenclature.
BUG=none
BRANCH=none
TEST=Build a device that uses i2c_bitbang (e.g. jacuzzi)
Signed-off-by: dossym@chromium.org
Change-Id: I597e1bf2f86ca93fe8b2230d603345033f43ed96
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2619071
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Diffstat (limited to 'common')
-rw-r--r-- | common/i2c_bitbang.c | 33 |
1 files changed, 17 insertions, 16 deletions
diff --git a/common/i2c_bitbang.c b/common/i2c_bitbang.c index 238cc182ff..1a2b0414f1 100644 --- a/common/i2c_bitbang.c +++ b/common/i2c_bitbang.c @@ -31,14 +31,14 @@ static void i2c_bitbang_unwedge(const struct i2c_port_t *i2c_port) gpio_set_level(i2c_port->scl, 1); /* * If clock is low, wait for a while in case of clock stretched - * by a slave. + * by a peripheral. */ if (!gpio_get_level(i2c_port->scl)) { for (i = 0;; i++) { if (i >= UNWEDGE_SCL_ATTEMPTS) { /* - * If we get here, a slave is holding the clock - * low and there is nothing we can do. + * If we get here, a peripheral is holding the + * clock low and there is nothing we can do. */ CPRINTS("I2C%d unwedge failed, " "SCL is held low", i2c_port->port); @@ -62,9 +62,9 @@ static void i2c_bitbang_unwedge(const struct i2c_port_t *i2c_port) i2c_delay(); /* - * Clock through the problem by clocking out 9 bits. If slave - * releases the SDA line, then we can stop clocking bits and - * send a STOP. + * Clock through the problem by clocking out 9 bits. If + * peripheral releases the SDA line, then we can stop clocking + * bits and send a STOP. */ for (j = 0; j < 9; j++) { if (gpio_get_level(i2c_port->sda)) @@ -110,9 +110,9 @@ static void i2c_stop_cond(const struct i2c_port_t *i2c_port) * SMBus 3.0, 4.2.5 * * the recommendation is that if SMBDAT is still low tTIMEOUT,MAX after - * SMBCLK has gone high at the end of a transaction the master should - * hold SMBCLK low for at least tTIMEOUT,MAX in an attempt to reset the - * SMBus interface of all of the devices on the bus. + * SMBCLK has gone high at the end of a transaction the controller + * should hold SMBCLK low for at least tTIMEOUT,MAX in an attempt to + * reset the SMBus interface of all of the devices on the bus. */ for (i = 0; i < 7000; i++) { if (gpio_get_level(i2c_port->scl)) @@ -145,7 +145,7 @@ static int clock_stretching(const struct i2c_port_t *i2c_port) * Devices participating in a transfer can abort the transfer in * progress and release the bus when any single clock low interval * exceeds the value of tTIMEOUT,MIN(=25ms). - * After the master in a transaction detects this condition, it must + * After the controller in a transaction detects this condition, it must * generate a stop condition within or after the current data byte in * the transfer process. */ @@ -249,10 +249,11 @@ static int i2c_write_byte(const struct i2c_port_t *i2c_port, uint8_t byte) if (nack) { /* - * The slave device detects an invalid command or invalid data. - * In this case the slave device must NACK the received byte. - * The master upon detection of this condition must generate a - * STOP condition and retry the transaction + * The peripheral device detects an invalid command or invalid + * data. In this case the peripheral device must NACK the + * received byte. The controller upon detection of this + * condition must generate a STOP condition and retry the + * transaction */ i2c_stop_cond(i2c_port); /* return EC_ERROR_BUSY to indicate i2c_xfer() to retry */ @@ -280,11 +281,11 @@ static int i2c_read_byte(const struct i2c_port_t *i2c_port, uint8_t *byte, } static int i2c_bitbang_xfer(const struct i2c_port_t *i2c_port, - const uint16_t slave_addr_flags, + const uint16_t addr_flags, const uint8_t *out, int out_size, uint8_t *in, int in_size, int flags) { - uint16_t addr_8bit = slave_addr_flags << 1, err = EC_SUCCESS; + uint16_t addr_8bit = addr_flags << 1, err = EC_SUCCESS; int i = 0; if (i2c_port->kbps != 100) |