diff options
author | Ting Shen <phoenixshen@google.com> | 2019-10-03 15:12:53 +0800 |
---|---|---|
committer | Commit Bot <commit-bot@chromium.org> | 2019-10-28 04:23:54 +0000 |
commit | daccb3adea9394116d7ab2c807e4a360cb5a93a1 (patch) | |
tree | 1ab613b22a459607ce71546827a8a4c4ffa7a4ae /driver/battery | |
parent | 6841c7835416d03aefb939ff94b3e9221e81c355 (diff) | |
download | chrome-ec-daccb3adea9394116d7ab2c807e4a360cb5a93a1.tar.gz |
smart_battery: add smbus error checking support
Jacuzzi/Kodama has a unstable software controlled i2c bus, its data
transmission may be interrupted by other higher priority tasks and
causes device timeout.
If timeout happens when ec is reading data, it has no knowledge about
what's happening on slave, and keep receiving bad data (0xFF's) until
end. The standard i2c/smbus error handling mechanism can not handle this
case, so we need the error checking feature from smbus 1.1 to ensure our
received data is correct.
This CL adds the error checking (PEC) functions to i2c and smart battery
module.
BUG=b:138415463
TEST=On kodama, enable CONFIG_CMD_I2C_STRESS_TEST,
no failure after 100k read/writes.
test code at CL:1865054
BRANCH=master
Change-Id: Ibb9ad3aa03d7690a08f59c617c2cd9c1b9cb0ff3
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1827138
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Tested-by: Ting Shen <phoenixshen@chromium.org>
Commit-Queue: Ting Shen <phoenixshen@chromium.org>
Diffstat (limited to 'driver/battery')
-rw-r--r-- | driver/battery/smart.c | 51 |
1 files changed, 43 insertions, 8 deletions
diff --git a/driver/battery/smart.c b/driver/battery/smart.c index 89a99623af..0d3d377ff8 100644 --- a/driver/battery/smart.c +++ b/driver/battery/smart.c @@ -21,8 +21,32 @@ static int fake_state_of_charge = -1; +static int battery_supports_pec(void) +{ + static int supports_pec = -1; + + if (!IS_ENABLED(CONFIG_SMBUS_PEC)) + return 0; + + if (supports_pec < 0) { + int spec_info; + int rv = i2c_read16(I2C_PORT_BATTERY, BATTERY_ADDR_FLAGS, + SB_SPECIFICATION_INFO, &spec_info); + /* failed, assuming not support and try again later */ + if (rv) + return 0; + + supports_pec = (BATTERY_SPEC_VERSION(spec_info) == + BATTERY_SPEC_VER_1_1_WITH_PEC); + CPRINTS("battery supports pec: %d", supports_pec); + } + return supports_pec; +} + test_mockable int sb_read(int cmd, int *param) { + uint16_t addr_flags = BATTERY_ADDR_FLAGS; + #ifdef CONFIG_BATTERY_CUT_OFF /* * Some batteries would wake up after cut-off if we talk to it. @@ -30,13 +54,16 @@ test_mockable int sb_read(int cmd, int *param) if (battery_is_cut_off()) return EC_RES_ACCESS_DENIED; #endif + if (battery_supports_pec()) + addr_flags |= I2C_FLAG_PEC; - return i2c_read16(I2C_PORT_BATTERY, BATTERY_ADDR_FLAGS, - cmd, param); + return i2c_read16(I2C_PORT_BATTERY, addr_flags, cmd, param); } test_mockable int sb_write(int cmd, int param) { + uint16_t addr_flags = BATTERY_ADDR_FLAGS; + #ifdef CONFIG_BATTERY_CUT_OFF /* * Some batteries would wake up after cut-off if we talk to it. @@ -44,13 +71,16 @@ test_mockable int sb_write(int cmd, int param) if (battery_is_cut_off()) return EC_RES_ACCESS_DENIED; #endif + if (battery_supports_pec()) + addr_flags |= I2C_FLAG_PEC; - return i2c_write16(I2C_PORT_BATTERY, BATTERY_ADDR_FLAGS, - cmd, param); + return i2c_write16(I2C_PORT_BATTERY, addr_flags, cmd, param); } int sb_read_string(int offset, uint8_t *data, int len) { + uint16_t addr_flags = BATTERY_ADDR_FLAGS; + #ifdef CONFIG_BATTERY_CUT_OFF /* * Some batteries would wake up after cut-off if we talk to it. @@ -58,9 +88,10 @@ int sb_read_string(int offset, uint8_t *data, int len) if (battery_is_cut_off()) return EC_RES_ACCESS_DENIED; #endif + if (battery_supports_pec()) + addr_flags |= I2C_FLAG_PEC; - return i2c_read_string(I2C_PORT_BATTERY, BATTERY_ADDR_FLAGS, - offset, data, len); + return i2c_read_string(I2C_PORT_BATTERY, addr_flags, offset, data, len); } int sb_read_mfgacc(int cmd, int block, uint8_t *data, int len) @@ -95,6 +126,8 @@ int sb_read_mfgacc(int cmd, int block, uint8_t *data, int len) int sb_write_block(int reg, const uint8_t *val, int len) { + uint16_t addr_flags = BATTERY_ADDR_FLAGS; + #ifdef CONFIG_BATTERY_CUT_OFF /* * Some batteries would wake up after cut-off if we talk to it. @@ -103,9 +136,11 @@ int sb_write_block(int reg, const uint8_t *val, int len) return EC_RES_ACCESS_DENIED; #endif + if (battery_supports_pec()) + addr_flags |= I2C_FLAG_PEC; + /* TODO: implement smbus_write_block. */ - return i2c_write_block(I2C_PORT_BATTERY, BATTERY_ADDR_FLAGS, - reg, val, len); + return i2c_write_block(I2C_PORT_BATTERY, addr_flags, reg, val, len); } int battery_get_mode(int *mode) |