coil: remove usbc, usb_pd, charge_manager, and tcpm

This code uses coil terms we're removing, but we don't use it in
platform/cr50. Remove the code instead of replacing the terms.

BUG=b:175244613
TEST=make buildall -j

Change-Id: Ia64e1ff4df941d2fe19e95e84dee8b743616aa88
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2613135
Reviewed-by: Namyoon Woo <namyoon@chromium.org>

1 files changed, 0 insertions, 66 deletions

diff --git a/driver/tcpm/tusb422.c b/driver/tcpm/tusb422.c
deleted file mode 100644
index 0e6a6c51d5..0000000000
--- a/driver/tcpm/tusb422.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Type-C port manager for TI TUSB422 Port Controller */
-
-#include "common.h"
-#include "tusb422.h"
-#include "tcpci.h"
-#include "tcpm.h"
-#include "timer.h"
-#include "usb_pd.h"
-
-#ifndef CONFIG_USB_PD_TCPM_TCPCI
-#error "TUSB422 is using a standard TCPCI interface"
-#error "Please upgrade your board configuration"
-
-#endif
-
-int tusb422_tcpci_tcpn_init(int port)
-{
-	int rv = tcpci_tcpm_init(port);
-
-	if (rv)
-		return rv;
-
-	/*
-	 * VBUS detection is supposed to be enabled by default, however the
-	 * TUSB422 has this disabled following reset.
-	 */
-	/* Enable VBUS detection */
-	return tcpc_write16(port, TCPC_REG_COMMAND, 0x33);
-}
-
-const struct tcpm_drv tusb422_tcpm_drv = {
-	.init			= &tusb422_tcpci_tcpn_init,
-	.release		= &tcpci_tcpm_release,
-	.get_cc			= &tcpci_tcpm_get_cc,
-#ifdef CONFIG_USB_PD_VBUS_DETECT_TCPC
-	.get_vbus_level		= &tcpci_tcpm_get_vbus_level,
-#endif
-	.select_rp_value	= &tcpci_tcpm_select_rp_value,
-	.set_cc			= &tcpci_tcpm_set_cc,
-	.set_polarity		= &tcpci_tcpm_set_polarity,
-	.set_vconn		= &tcpci_tcpm_set_vconn,
-	.set_msg_header		= &tcpci_tcpm_set_msg_header,
-	.set_rx_enable		= &tcpci_tcpm_set_rx_enable,
-	.get_message_raw	= &tcpci_tcpm_get_message_raw,
-	.transmit		= &tcpci_tcpm_transmit,
-	.tcpc_alert		= &tcpci_tcpc_alert,
-#ifdef CONFIG_USB_PD_DISCHARGE_TCPC
-	.tcpc_discharge_vbus	= &tcpci_tcpc_discharge_vbus,
-#endif
-#ifdef CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-	.drp_toggle		= &tcpci_tcpc_drp_toggle,
-#endif
-#ifdef CONFIG_USBC_PPC
-	.set_snk_ctrl		= &tcpci_tcpm_set_snk_ctrl,
-	.set_src_ctrl		= &tcpci_tcpm_set_src_ctrl,
-#endif
-	.get_chip_info		= &tcpci_get_chip_info,
-#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
-	.enter_low_power_mode	= &tcpci_enter_low_power_mode,
-#endif
-};