usb_mux: Remove disconnect latch flag

With dark resume enabled, disconnect latch flag is obsolete

BUG=None
BRANCH=None
TEST=Swapping Type C devices in s0ix works

Signed-off-by: Ayushee Shah <ayushee.shah@intel.com>
Change-Id: Ica1b55f820f5b3fff5b7dabf88ca57ac0993f246
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2846417
Reviewed-by: Madhusudanarao Amara <madhusudanarao.amara@intel.corp-partner.google.com>
Reviewed-by: Abe Levkoy <alevkoy@chromium.org>

1 files changed, 1 insertions, 52 deletions

diff --git a/driver/usb_mux/usb_mux.c b/driver/usb_mux/usb_mux.c
index ad347c284f..f3418556d0 100644
--- a/driver/usb_mux/usb_mux.c
+++ b/driver/usb_mux/usb_mux.c
@@ -35,11 +35,8 @@ static uint32_t flags[CONFIG_USB_PD_PORT_MAX_COUNT];
 /* Device is in low power mode. */
 #define USB_MUX_FLAG_IN_LPM		BIT(0)
 
-/* The following bit is used to configure virtual mux in disconnect mode */
-#define USB_MUX_FLAG_DISCONNECT_LATCH	BIT(1)
-
 /* Device initialized at least once */
-#define USB_MUX_FLAG_INIT		BIT(2)
+#define USB_MUX_FLAG_INIT		BIT(1)
 
 enum mux_config_type {
 	USB_MUX_INIT,
@@ -66,12 +63,6 @@ static int configure_mux(int port,
 			*mux_state = USB_PD_MUX_NONE;
 	}
 
-	if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) &&
-	   ((config == USB_MUX_SET_MODE && *mux_state == USB_PD_MUX_NONE) ||
-	      config == USB_MUX_INIT)) {
-		usb_mux_set_disconnect_latch_flag(port, true);
-	}
-
 	/*
 	 * a MUX for a particular port can be a linked list chain of
 	 * MUXes.  So when we change one, we traverse the whole list
@@ -285,35 +276,6 @@ mux_state_t usb_mux_get(int port)
 	return rv ? USB_PD_MUX_NONE : mux_state;
 }
 
-/* Get USB MUX (virtual MUX) disconnect flag */
-bool usb_mux_get_disconnect_latch_flag(int port)
-{
-	bool rv = false;
-
-	if (port >= board_get_usb_pd_port_count())
-		return rv;
-
-	if (!IS_ENABLED(CONFIG_USB_MUX_VIRTUAL))
-		return rv;
-
-	return !!(flags[port] & USB_MUX_FLAG_DISCONNECT_LATCH);
-}
-
-/* Set USB MUX (virtual MUX) disconnect flag */
-void usb_mux_set_disconnect_latch_flag(int port, bool enable)
-{
-	if (port >= board_get_usb_pd_port_count())
-		return;
-
-	if (!IS_ENABLED(CONFIG_USB_MUX_VIRTUAL))
-		return;
-
-	if (enable)
-		atomic_or(&flags[port], USB_MUX_FLAG_DISCONNECT_LATCH);
-	else
-		atomic_clear_bits(&flags[port], USB_MUX_FLAG_DISCONNECT_LATCH);
-}
-
 void usb_mux_flip(int port)
 {
 	mux_state_t mux_state;
@@ -464,19 +426,6 @@ static enum ec_status hc_usb_pd_mux_info(struct host_cmd_handler_args *args)
 
 	r->flags = mux_state;
 
-	/*
-	 * Force disconnect mode if disconnect latch flag is set.
-	 * Send host event for configuring the latest mux state
-	 */
-	if (IS_ENABLED(CONFIG_USB_MUX_VIRTUAL) &&
-	    usb_mux_get_disconnect_latch_flag(port)) {
-		r->flags = USB_PD_MUX_NONE;
-		usb_mux_set_disconnect_latch_flag(port, false);
-		args->response_size = sizeof(*r);
-		host_set_single_event(EC_HOST_EVENT_USB_MUX);
-		return EC_RES_SUCCESS;
-	}
-
 	/* Clear HPD IRQ event since we're about to inform host of it. */
 	if (IS_ENABLED(CONFIG_USB_MUX_VIRTUAL) &&
 	    (r->flags & USB_PD_MUX_HPD_IRQ)) {