rt1718s: refactor: move gpio control to driver module

This CL moves RT1718S gpio control from board file to common driver
codebase, and implements the set flag and get/set level functions.

Note that this CL does not fully implement IOEX interface because TCPC
has different init process than usual ioexpanders.

BUG=none
TEST=1) pass faft_pd
     2) manually test pd source/sink/frs on port 1
BRANCH=main

Signed-off-by: Ting Shen <phoenixshen@google.com>
Change-Id: If2a0bca2b13ad4748eea54b4c8004da7dc6fc6a5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3159643
Reviewed-by: Rong Chang <rongchang@chromium.org>
Commit-Queue: Ting Shen <phoenixshen@chromium.org>
Tested-by: Ting Shen <phoenixshen@chromium.org>

2 files changed, 74 insertions, 6 deletions

diff --git a/driver/tcpm/rt1718s.c b/driver/tcpm/rt1718s.c
index 9a2f6319c7..9d5a8895ad 100644
--- a/driver/tcpm/rt1718s.c
+++ b/driver/tcpm/rt1718s.c
@@ -487,6 +487,39 @@ out:
 	return rv;
 }
 
+void rt1718s_gpio_set_flags(int port, enum rt1718s_gpio signal, uint32_t flags)
+{
+	int val = 0;
+
+	if (!(flags & GPIO_OPEN_DRAIN))
+		val |= RT1718S_GPIO_CTRL_OD_N;
+	if (flags & GPIO_PULL_UP)
+		val |= RT1718S_GPIO_CTRL_PU;
+	if (flags & GPIO_PULL_DOWN)
+		val |= RT1718S_GPIO_CTRL_PD;
+	if (flags & GPIO_HIGH)
+		val |= RT1718S_GPIO_CTRL_O;
+	if (flags & GPIO_OUTPUT)
+		val |= RT1718S_GPIO_CTRL_OE;
+
+	rt1718s_write8(port, RT1718S_GPIO_CTRL(signal), val);
+}
+
+void rt1718s_gpio_set_level(int port, enum rt1718s_gpio signal, int value)
+{
+	rt1718s_update_bits8(port, RT1718S_GPIO_CTRL(signal),
+			RT1718S_GPIO_CTRL_O,
+			value ? 0xFF : 0);
+}
+
+int rt1718s_gpio_get_level(int port, enum rt1718s_gpio signal)
+{
+	int val;
+
+	rt1718s_read8(port, RT1718S_GPIO_CTRL(signal), &val);
+	return !!(val & RT1718S_GPIO_CTRL_I);
+}
+
 /* RT1718S is a TCPCI compatible port controller */
 const struct tcpm_drv rt1718s_tcpm_drv = {
 	.init			= &rt1718s_init,
diff --git a/driver/tcpm/rt1718s.h b/driver/tcpm/rt1718s.h
index 3bc5696fd7..07c3ed3f82 100644
--- a/driver/tcpm/rt1718s.h
+++ b/driver/tcpm/rt1718s.h
@@ -103,12 +103,14 @@
 #define RT1718S_VBUS_CTRL_EN				0xEC
 #define RT1718S_VBUS_CTRL_EN_GPIO2_VBUS_PATH_EN		BIT(7)
 #define RT1718S_VBUS_CTRL_EN_GPIO1_VBUS_PATH_EN		BIT(6)
-#define RT1718S_GPIO1_CTRL				0xED
-#define RT1718S_GPIO2_CTRL				0xEE
-#define RT1718S_GPIO3_CTRL				0xEF
-#define RT1718S_GPIOX_OD_N				BIT(3)
-#define RT1718S_GPIOX_OE				BIT(2)
-#define RT1718S_GPIOX_CTRL_GPIOX_O			BIT(1)
+
+#define RT1718S_GPIO_CTRL(n)				(0xED + (n))
+#define RT1718S_GPIO_CTRL_PU				BIT(5)
+#define RT1718S_GPIO_CTRL_PD				BIT(4)
+#define RT1718S_GPIO_CTRL_OD_N				BIT(3)
+#define RT1718S_GPIO_CTRL_OE				BIT(2)
+#define RT1718S_GPIO_CTRL_O				BIT(1)
+#define RT1718S_GPIO_CTRL_I				BIT(0)
 
 #define RT1718S_UNLOCK_PW_2				0xF0
 #define RT1718S_UNLOCK_PW_1				0xF1
@@ -207,4 +209,37 @@ enum rt1718s_adc_channel {
 
 int rt1718s_get_adc(int port, enum rt1718s_adc_channel channel, int *adc_val);
 
+enum rt1718s_gpio {
+	RT1718S_GPIO1 = 0,
+	RT1718S_GPIO2,
+	RT1718S_GPIO3,
+};
+
+/**
+ * Set flags for GPIO
+ *
+ * @param port		rt1718s I2C port
+ * @param signal	gpio pin name in enum rt1718s_gpio
+ * @param flags		GPIO_* flags defined in include/gpio.h
+ */
+void rt1718s_gpio_set_flags(int port, enum rt1718s_gpio signal, uint32_t flags);
+
+/**
+ * Set the value of a signal
+ *
+ * @param port		rt1718s I2C port
+ * @param signal	gpio pin name in enum rt1718s_gpio
+ * @param value		New value for signal (0 = low, non-zero = high)
+ */
+void rt1718s_gpio_set_level(int port, enum rt1718s_gpio signal, int value);
+
+/**
+ * Get the current value of a signal.
+ *
+ * @param port		rt1718s I2C port
+ * @param signal	gpio pin name in enum rt1718s_gpio
+ * @return 0 if low, 1 if high.
+ */
+int rt1718s_gpio_get_level(int port, enum rt1718s_gpio signal);
+
 #endif /* __CROS_EC_USB_PD_TCPM_MT6370_H */