diff options
| author | Gwendal Grignou <gwendal@chromium.org> | 2017-01-10 14:14:35 -0800 |
|---|---|---|
| committer | chrome-bot <chrome-bot@chromium.org> | 2017-01-10 21:34:32 -0800 |
| commit | a8a67a8073028bb825a53c74859c688240bd34f3 (patch) | |
| tree | 62a3d64d9186cdd47c03eb48358e4694075105c2 /driver | |
| parent | 52d333662a1d463223bcee4792cc7abd3e3482d6 (diff) | |
| download | chrome-ec-a8a67a8073028bb825a53c74859c688240bd34f3.tar.gz | |
driver: bmi160: Set odr to 0 at init.
When we switch to a state where the sensor is not powered,
we don't call set_data_rate(0), because we may trigger an i2c/spi access
to a sensor already powered off. It has the side effect to leave
data->odr to the last set sensor frequency.
When we init the BMI160, it starts in suspend mode. We will set it to
normal mode only if data->odr is 0. Therefore, we must set odr to 0 in
the init routine.
BUG=chrome-os-partner:61502
BRANCH=reef,kevin
TEST=On reef, without this change. When going to S5 (shutdown -h 0) and
power back up, sensor is stuck (on EC, accelread 1 reads old value).
With this fix, sensor is active and working.
This fix a regression due to CL:411964.
Check others driver do not check odr for setting suspend/normal mode.
Change-Id: Ibc7519d49e55a0b43b4c12ed545bd75ab0260766
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/426766
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'driver')
| -rw-r--r-- | driver/accelgyro_bmi160.c | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/driver/accelgyro_bmi160.c b/driver/accelgyro_bmi160.c index a92cc1f54c..4ea5a6a66a 100644 --- a/driver/accelgyro_bmi160.c +++ b/driver/accelgyro_bmi160.c @@ -1087,6 +1087,7 @@ static int read(const struct motion_sensor_t *s, vector_3_t v) static int init(const struct motion_sensor_t *s) { int ret = 0, tmp; + struct accelgyro_saved_data_t *data = BMI160_GET_SAVED_DATA(s); ret = raw_read8(s->port, s->addr, BMI160_CHIP_ID, &tmp); if (ret) @@ -1214,6 +1215,11 @@ static int init(const struct motion_sensor_t *s) } #endif + /* + * The sensor is in Suspend mode at init, + * so set data rate to 0. + */ + data->odr = 0; set_range(s, s->default_range, 0); if (s->type == MOTIONSENSE_TYPE_ACCEL) { |