gsctool: add factory mode command

We added a cr50 vendor command to control factory mode. This change adds
gsctool support for using the command.

gsctool -F [enable|disable] can be used to set factory mode. You can't
use it to get the factory mode setting, because factory mode is
indistinguishable from other forms of ccd. The regular ccd info can be
used instead gsctool -I.

BUG=b:77543904
BRANCH=cr50
TEST=none

Change-Id: I715e296c323be20bab0b54a2f94a380b61f74cd2
Signed-off-by: Mary Ruthven <mruthven@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1069370
Commit-Ready: Mary Ruthven <mruthven@chromium.org>
Tested-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>

1 files changed, 53 insertions, 13 deletions

diff --git a/extra/usb_updater/gsctool.c b/extra/usb_updater/gsctool.c
index 9e35bef881..0f06f79ca1 100644
--- a/extra/usb_updater/gsctool.c
+++ b/extra/usb_updater/gsctool.c
@@ -196,7 +196,7 @@ struct upgrade_pkt {
 static int verbose_mode;
 static uint32_t protocol_version;
 static char *progname;
-static char *short_opts = "abcd:fhIikO:oPprstUuVv";
+static char *short_opts = "abcd:F:fhIikO:oPprstUuVv";
 static const struct option long_opts[] = {
 	/* name    hasarg *flag val */
 	{"any",		0,   NULL, 'a'},
@@ -208,6 +208,7 @@ static const struct option long_opts[] = {
 	{"ccd_unlock",  0,   NULL, 'U'},
 	{"corrupt",	0,   NULL, 'c'},
 	{"device",	1,   NULL, 'd'},
+	{"factory",	1,   NULL, 'F'},
 	{"fwver",	0,   NULL, 'f'},
 	{"help",	0,   NULL, 'h'},
 	{"openbox_rma", 1,   NULL, 'O'},
@@ -513,6 +514,8 @@ static void usage(int errs)
 	       "  -d,--device  VID:PID     USB device (default %04x:%04x)\n"
 	       "  -f,--fwver               "
 	       "Report running Cr50 firmware versions\n"
+	       "  -F,--factory [enable|disable]\n"
+	       "                           Control factory mode\n"
 	       "  -h,--help                Show this message\n"
 	       "  -I,--ccd_info            Get information about CCD state\n"
 	       "  -i,--board_id [ID[:FLAGS]]\n"
@@ -529,9 +532,9 @@ static void usage(int errs)
 	       "                           Set or clear CCD password. Use\n"
 	       "                           'clear:<cur password>' to clear it\n"
 	       "  -p,--post_reset          Request post reset after transfer\n"
-	       "  -r,--rma_auth [[auth_code|\"disable\"]\n"
+	       "  -r,--rma_auth [auth_code]\n"
 	       "                           Request RMA challenge, process "
-	       "RMA authentication code or disable RMA state\n"
+	       "RMA authentication code\n"
 	       "  -s,--systemdev           Use /dev/tpm0 (-d is ignored)\n"
 	       "  -t,--trunks_send         Use `trunks_send --raw' "
 	       "(-d is ignored)\n"
@@ -1862,14 +1865,8 @@ static void process_rma(struct transfer_descriptor *td, const char *authcode)
 	}
 
 	if (!strcmp(authcode, "disable")) {
-		printf("Disabling RMA mode\n");
-		send_vendor_command(td, VENDOR_CC_DISABLE_FACTORY, NULL, 0,
-				    rma_response, &response_size);
-		if (response_size) {
-			fprintf(stderr, "Failed disabling RMA, error %d\n",
-				rma_response[0]);
-			exit(update_error);
-		}
+		printf("Invalid arg. Try using 'gsctool -F disable'\n");
+		exit(update_error);
 		return;
 	}
 
@@ -1891,6 +1888,39 @@ static void process_rma(struct transfer_descriptor *td, const char *authcode)
 	printf("RMA unlock succeeded.\n");
 }
 
+/*
+ * Enable or disable factory mode. Factory mode will only be enabled if HW
+ * write protect is removed.
+ */
+static void process_factory_mode(struct transfer_descriptor *td,
+				 const char *arg)
+{
+	char *cmd_str;
+	int rv;
+	uint16_t subcommand;
+
+	if (!strcasecmp(arg, "disable")) {
+		subcommand = VENDOR_CC_DISABLE_FACTORY;
+		cmd_str = "dis";
+	} else if (!strcasecmp(arg, "enable")) {
+		subcommand = VENDOR_CC_RESET_FACTORY;
+		cmd_str = "en";
+
+	} else {
+		fprintf(stderr, "Invalid factory mode arg %s", arg);
+		exit(update_error);
+	}
+
+	printf("%sabling factory mode\n", cmd_str);
+	rv = send_vendor_command(td, subcommand, NULL, 0, NULL, NULL);
+	if (rv) {
+		fprintf(stderr, "Failed %sabling factory mode, error "
+			"%d\n", cmd_str, rv);
+		exit(update_error);
+	}
+	printf("Factory %sable succeeded.\n", cmd_str);
+}
+
 static void report_version(void)
 {
 	/* Get version from the generated file, ignore the underscore prefix. */
@@ -1926,6 +1956,8 @@ int main(int argc, char *argv[])
 	const char *exclusive_opt_error =
 		"Options -a, -s and -t are mutually exclusive\n";
 	const char *openbox_desc_file = NULL;
+	int factory_mode = 0;
+	char *factory_mode_arg;
 
 	progname = strrchr(argv[0], '/');
 	if (progname)
@@ -2002,6 +2034,10 @@ int main(int argc, char *argv[])
 		case 'P':
 			password = 1;
 			break;
+		case 'F':
+			factory_mode = 1;
+			factory_mode_arg = optarg;
+			break;
 		case 'r':
 			rma = 1;
 
@@ -2071,6 +2107,7 @@ int main(int argc, char *argv[])
 	    !ccd_open &&
 	    !ccd_unlock &&
 	    !corrupt_inactive_rw &&
+	    !factory_mode &&
 	    !password &&
 	    !rma &&
 	    !show_fw_ver &&
@@ -2101,9 +2138,9 @@ int main(int argc, char *argv[])
 
 	if (((bid_action != bid_none) + !!rma + !!password +
 	     !!ccd_open + !!ccd_unlock + !!ccd_lock + !!ccd_info +
-	     !!openbox_desc_file) > 2) {
+	     !!openbox_desc_file + !!factory_mode) > 2) {
 		fprintf(stderr, "ERROR: "
-			"options -I -i, -k, -O, -o, -P, -r, and -u "
+			"options -F, -I, -i, -k, -O, -o, -P, -r, and -u "
 			"are mutually exclusive\n");
 		exit(update_error);
 	}
@@ -2137,6 +2174,9 @@ int main(int argc, char *argv[])
 	if (rma)
 		process_rma(&td, rma_auth_code);
 
+	if (factory_mode)
+		process_factory_mode(&td, factory_mode_arg);
+
 	if (corrupt_inactive_rw)
 		invalidate_inactive_rw(&td);