extra: Move lightbar simulator into subdirectory

This clears the top level extra directory for additional
extras.

Signed-off-by: Anton Staaf <robotboy@chromium.org>

BRANCH=None
BUG=None
TEST=cd extra/lightbar; make; lightbar

Change-Id: If05a768e4d33cbf21b2ce47a056c960a95728558
Reviewed-on: https://chromium-review.googlesource.com/217537
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>

8 files changed, 41 insertions, 43 deletions

diff --git a/extra/README b/extra/README
index 16659415fb..874a7b1b32 100644
--- a/extra/README
+++ b/extra/README
@@ -3,44 +3,3 @@ This directory is for experiments only. It is not built automatically,
 required, supported, guaranteed to work, or necessarily well-documented.
 
 The contents may change without warning at any time.
-
-------------------------------------------------------------------------------
-Lightbar simulator
-------------------------------------------------------------------------------
-
-Build with "make lightbar". The executable is "./lightbar".
-
-You may need to install libxcb1-dev or similar.
-
-This provides a simulation environment for the lightbar task, compiling
-common/lightbar.c from the EC source, but faking the rest of the EC.
-
-The EC console is on stdin/stdout, delivering all input to the lightbar's
-console command handler (so it prefixes any input with "lightbar"). The
-lightbar itself is displayed in an X window. You can click in that window to
-emulate changes to the battery level, AC connection, and brightness, all of
-which are normally outside the lightbar task's direct control.
-
-The initial sequence is "S5". Try issuing the command "seq s3s0" to see
-something more familiar.
-
-
-Note: the Pixel lightbar circuitry has three modes of operation:
-
-Unpowered
-
-  When the host CPU is off (S5/G3), all power to the lightbar and its
-  controller circuitry is lost.
-
-On
-
-  When the host CPU is on (S0) or suspended (S3), the lightbar is powered
-  again. After every power loss, it will need to be reinitialized by calling
-  lb_init() before it can be used.
-
-Standby
-
-  The lightbar controller ICs can turn off all the LED outputs to conserve
-  power. This is the initial state when power is applied. You can turn the
-  LEDs off manually by calling lb_off(). When suspended, the controller will
-  respond to commands, but the LEDs aren't lit. Turn them on with lb_on().
diff --git a/extra/.gitignore b/extra/lightbar/.gitignore
index 964154302a..964154302a 100644
--- a/extra/.gitignore
+++ b/extra/lightbar/.gitignore
diff --git a/extra/Makefile b/extra/lightbar/Makefile
index e7ef73ec00..920483b781 100644
--- a/extra/Makefile
+++ b/extra/lightbar/Makefile
@@ -4,12 +4,12 @@
 
 PROG= lightbar
 HEADERS= simulation.h
-SRCS= main.c windows.c input.c ../common/lightbar.c
+SRCS= main.c windows.c input.c ../../common/lightbar.c
 
 # comment this out if you don't have libreadline installed
 HAS_GNU_READLINE=1
 
-INCLUDE= -I. -I../include
+INCLUDE= -I. -I../../include
 CFLAGS= -g -Wall -Werror -pthread ${INCLUDE} -DLIGHTBAR_SIMULATION
 LDFLAGS = -lX11 -lxcb -lrt
 
diff --git a/extra/lightbar/README b/extra/lightbar/README
new file mode 100644
index 0000000000..1862f922e4
--- /dev/null
+++ b/extra/lightbar/README
@@ -0,0 +1,39 @@
+Lightbar simulator
+------------------------------------------------------------------------------
+
+Build with "make lightbar". The executable is "./lightbar".
+
+You may need to install libxcb1-dev or similar.
+
+This provides a simulation environment for the lightbar task, compiling
+common/lightbar.c from the EC source, but faking the rest of the EC.
+
+The EC console is on stdin/stdout, delivering all input to the lightbar's
+console command handler (so it prefixes any input with "lightbar"). The
+lightbar itself is displayed in an X window. You can click in that window to
+emulate changes to the battery level, AC connection, and brightness, all of
+which are normally outside the lightbar task's direct control.
+
+The initial sequence is "S5". Try issuing the command "seq s3s0" to see
+something more familiar.
+
+
+Note: the Pixel lightbar circuitry has three modes of operation:
+
+Unpowered
+
+  When the host CPU is off (S5/G3), all power to the lightbar and its
+  controller circuitry is lost.
+
+On
+
+  When the host CPU is on (S0) or suspended (S3), the lightbar is powered
+  again. After every power loss, it will need to be reinitialized by calling
+  lb_init() before it can be used.
+
+Standby
+
+  The lightbar controller ICs can turn off all the LED outputs to conserve
+  power. This is the initial state when power is applied. You can turn the
+  LEDs off manually by calling lb_off(). When suspended, the controller will
+  respond to commands, but the LEDs aren't lit. Turn them on with lb_on().
diff --git a/extra/input.c b/extra/lightbar/input.c
index fe4f7cd19f..fe4f7cd19f 100644
--- a/extra/input.c
+++ b/extra/lightbar/input.c
diff --git a/extra/main.c b/extra/lightbar/main.c
index 38234e743c..38234e743c 100644
--- a/extra/main.c
+++ b/extra/lightbar/main.c
diff --git a/extra/simulation.h b/extra/lightbar/simulation.h
index 569107023b..569107023b 100644
--- a/extra/simulation.h
+++ b/extra/lightbar/simulation.h
diff --git a/extra/windows.c b/extra/lightbar/windows.c
index 20b3a5780c..20b3a5780c 100644
--- a/extra/windows.c
+++ b/extra/lightbar/windows.c