Merge remote-tracking branch cros/main into factory-brya-14909.124.B-main

Generated by: util/update_release_branch.py --baseboard brya --relevant_paths_file
baseboard/brya/relevant-paths.txt factory-brya-14909.124.B-main

Relevant changes:

git log --oneline 19d4d68ffa..aa40b859b3 -- baseboard/brya board/agah
board/anahera board/banshee board/brya board/crota board/felwinter
board/gimble board/kano board/mithrax board/osiris board/primus
board/redrix board/taeko board/taniks board/vell board/volmar
driver/bc12/pi3usb9201_public.* driver/charger/bq25710.*
driver/ppc/nx20p348x.* driver/ppc/syv682x_public.*
driver/retimer/bb_retimer_public.* driver/tcpm/nct38xx.*
driver/tcpm/ps8xxx_public.* driver/tcpm/tcpci.* include/power/alderlake*
include/intel_x86.h power/alderlake* power/intel_x86.c
util/getversion.sh

e6da633c38 driver: Sort header files
234a87ae2d tcpci: Add FRS enable to driver structure
a56be59ccd tcpm_header: add test for tcpm_dump_registers
57b3256963 Rename CONFIG_CHARGER_INPUT_CURRENT to _CHARGER_DEFAULT_CURRENT_LIMIT
e420c8ff9a marasov: Modify TypeC and TypeA configuration.
43b53e0045 Add default implementation of board_set_charge_limit
b75dc90677 Add CONFIG_CHARGER_MIN_INPUT_CURRENT_LIMIT
f1b563c350 baseboard: Sort header files
7d01b1e58d driver/retimer/ps8818.h: Add I2C ADDR FLAGS 0x30, 0x58, 0x70
ec31407993 Add CONFIG_CHARGER_INPUT_CURRENT_DERATE_PCT
8f89f69a5b crota: disable lid angle sensor for clamshell

BRANCH=None
BUG=b:260630630 b:163093572 b:259002141 b:255184961 b:259354679
BUG=b:247100970 b:254328661
TEST=`emerge-brya chromeos-ec`

Force-Relevant-Builds: all
Change-Id: I0ecfa0e6af68631283c7a9e8f1afb9d827176c62
Signed-off-by: YH Lin <yueherngl@google.com>

1 files changed, 114 insertions, 0 deletions

diff --git a/zephyr/program/corsola/npcx_interrupts.dtsi b/zephyr/program/corsola/npcx_interrupts.dtsi
new file mode 100644
index 0000000000..f3da785a60
--- /dev/null
+++ b/zephyr/program/corsola/npcx_interrupts.dtsi
@@ -0,0 +1,114 @@
+/* Copyright 2022 The ChromiumOS Authors
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/*
+ * Kingler and Steelix use the same dts, take care of this when modify it.
+ */
+
+/ {
+	aliases {
+		int-wp = &int_wp;
+	};
+
+	gpio-interrupts {
+		compatible = "cros-ec,gpio-interrupts";
+
+		int_power_button: power_button {
+			irq-pin = <&gpio_gsc_ec_pwr_btn_odl>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "power_button_interrupt";
+		};
+		int_volume_up: volume_up {
+			irq-pin = <&gpio_ec_volup_btn_odl>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "button_interrupt";
+		};
+		int_volume_down: volume_down {
+			irq-pin = <&gpio_ec_voldn_btn_odl>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "button_interrupt";
+		};
+		int_lid_open: lid_open {
+			irq-pin = <&gpio_lid_open>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "lid_interrupt";
+		};
+		int_warm_rst: warm_rst {
+			irq-pin = <&ap_ec_warm_rst_req>;
+			flags = <GPIO_INT_EDGE_RISING>;
+			handler = "chipset_reset_request_interrupt";
+		};
+		int_ap_in_sleep: ap_in_sleep {
+			irq-pin = <&ap_in_sleep_l>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "power_signal_interrupt";
+		};
+		int_ap_in_rst: ap_in_rst {
+			irq-pin = <&ap_sysrst_odl_r>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "power_signal_interrupt";
+		};
+		int_ap_wdtrst: ap_wdtrst {
+			irq-pin = <&ap_ec_wdtrst_l>;
+			flags = <GPIO_INT_EDGE_FALLING>;
+			handler = "chipset_watchdog_interrupt";
+		};
+		int_ac_present: ac_present {
+			irq-pin = <&gpio_acok_od>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "extpower_interrupt";
+		};
+		int_usba: usba {
+			irq-pin = <&gpio_ap_xhci_init_done>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "usb_a0_interrupt";
+		};
+		int_wp: wp {
+			irq-pin = <&gpio_ec_wp_l>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "switch_interrupt";
+		};
+		int_usb_c0_tcpc: usb_c0_tcpc {
+			irq-pin = <&gpio_usb_c0_tcpc_int_odl>;
+			flags = <GPIO_INT_EDGE_FALLING>;
+			handler = "tcpc_alert_event";
+		};
+		int_usb_c1_tcpc: usb_c1_tcpc {
+			irq-pin = <&gpio_usb_c1_tcpc_int_odl>;
+			flags = <GPIO_INT_EDGE_FALLING>;
+			handler = "tcpc_alert_event";
+		};
+		int_usb_c0_ppc: usb_c0_ppc {
+			irq-pin = <&gpio_usb_c0_ppc_int_odl>;
+			flags = <GPIO_INT_EDGE_FALLING>;
+			handler = "ppc_interrupt";
+		};
+		int_usb_c0_bc12: usb_c0_bc12 {
+			irq-pin = <&gpio_usb_c0_bc12_int_odl>;
+			flags = <GPIO_INT_EDGE_FALLING>;
+			handler = "bc12_interrupt";
+		};
+		int_x_ec_gpio2: x_ec_gpio2 {
+			irq-pin = <&gpio_x_ec_gpio2>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "x_ec_interrupt";
+		};
+		int_base_imu: base_imu {
+			irq-pin = <&base_imu_int_l>;
+			flags = <GPIO_INT_EDGE_FALLING>;
+			handler = "bmi3xx_interrupt";
+		};
+		int_tablet_mode: tablet_mode {
+			irq-pin = <&gpio_tablet_mode_l>;
+			flags = <GPIO_INT_EDGE_BOTH>;
+			handler = "gmr_tablet_switch_isr";
+		};
+		int_ccd_mode_odl: ccd-mode-odl {
+			irq-pin = <&gpio_ccd_mode_odl>;
+			flags = <GPIO_INT_EDGE_FALLING>;
+			handler = "ccd_interrupt";
+		};
+	};
+};