zephyr: herobrine_npcx9: Initial image which uses NPCX9

This CL copies the Zephyr board/trogdor to board/herobrine_npcx9.
Modify the chip config to npcx9m3f and some related configs (simply
rename) and dts (update the UART property). The board/herobrine_npcx9
and other NPCX9 boards, like board/brya will be merged to a single
board. But the merge needs more work to remove the not-common configs
and dts to the project directories. Leave it as a future work.

This CL also copies the project trogdor/herobrine_npcx7 to
herobrine/herobrine_npcx9. Remove the dead files power.c and
hibernate.c, in the EC-OS directory. Remove the Zephyr 2.5 support
and board.cmake (needed only for 2.5).

BRANCH=None
BUG=b:192253134
TEST=Built the herobrine_npcx9 image successfully.

Change-Id: I9641768ee978920f6a8677f13ae14e0a26ad35f4
Signed-off-by: Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2993220
Reviewed-by: Yuval Peress <peress@chromium.org>

1 files changed, 149 insertions, 0 deletions

diff --git a/zephyr/projects/herobrine/herobrine_npcx9/prj.conf b/zephyr/projects/herobrine/herobrine_npcx9/prj.conf
new file mode 100644
index 0000000000..f846733869
--- /dev/null
+++ b/zephyr/projects/herobrine/herobrine_npcx9/prj.conf
@@ -0,0 +1,149 @@
+# Copyright 2021 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+
+CONFIG_CROS_EC=y
+CONFIG_SHIMMED_TASKS=y
+CONFIG_PLATFORM_EC=y
+CONFIG_PLATFORM_EC_BRINGUP=y
+CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y
+CONFIG_PLATFORM_EC_SWITCH=y
+CONFIG_PLATFORM_EC_LID_SWITCH=y
+CONFIG_PLATFORM_EC_BACKLIGHT_LID=y
+CONFIG_PLATFORM_EC_POWER_BUTTON=y
+CONFIG_I2C=y
+
+# LED
+CONFIG_PLATFORM_EC_LED_COMMON=y
+
+# PWM
+CONFIG_PWM=y
+CONFIG_PWM_SHELL=n
+CONFIG_PLATFORM_EC_PWM=y
+CONFIG_PLATFORM_EC_PWM_DISPLIGHT=y
+CONFIG_PLATFORM_EC_PWM_KBLIGHT=y
+
+# Application Processor is Qualcomm SC7280
+CONFIG_AP_ARM_QUALCOMM_SC7280=y
+
+# Board version is selected over GPIO board ID pins.
+CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=y
+
+# Power Sequencing
+CONFIG_PLATFORM_EC_POWERSEQ=y
+CONFIG_PLATFORM_EC_POWERSEQ_HOST_SLEEP=y
+CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y
+CONFIG_PLATFORM_EC_CHIPSET_RESET_HOOK=y
+CONFIG_PLATFORM_EC_CHIPSET_RESUME_INIT_HOOK=y
+
+# TODO(b:193719620): Enable EC EFS2 (toggled by PLATFORM_EC_VBOOT).
+CONFIG_PLATFORM_EC_VBOOT=n
+
+# MKBP event mask
+CONFIG_PLATFORM_EC_MKBP_EVENT_WAKEUP_MASK=y
+CONFIG_PLATFORM_EC_MKBP_HOST_EVENT_WAKEUP_MASK=y
+
+# MKBP event
+CONFIG_PLATFORM_EC_MKBP_EVENT=y
+CONFIG_PLATFORM_EC_MKBP_USE_GPIO=y
+
+# Keyboard
+CONFIG_PLATFORM_EC_KEYBOARD=y
+CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_MKBP=y
+CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y
+CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y
+CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y
+CONFIG_PLATFORM_EC_CMD_BUTTON=y
+CONFIG_CROS_KB_RAW_NPCX=y
+
+# ADC
+CONFIG_PLATFORM_EC_ADC=y
+CONFIG_ADC=y
+CONFIG_ADC_SHELL=n
+
+# Battery
+CONFIG_HAS_TASK_USB_CHG_P1=y
+CONFIG_PLATFORM_EC_BATTERY=y
+CONFIG_PLATFORM_EC_BATTERY_SMART=y
+CONFIG_PLATFORM_EC_I2C_VIRTUAL_BATTERY=y
+CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED=y
+CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y
+CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y
+CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y
+CONFIG_PLATFORM_EC_CHARGER_ISL9238=y
+CONFIG_PLATFORM_EC_CHARGE_RAMP_HW=y
+CONFIG_PLATFORM_EC_USE_BATTERY_DEVICE_CHEMISTRY=y
+CONFIG_PLATFORM_EC_BATTERY_DEVICE_CHEMISTRY="LION"
+CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y
+CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y
+CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y
+CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON=2
+CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=10000
+CONFIG_PLATFORM_EC_CHARGER_PROFILE_OVERRIDE=y
+CONFIG_PLATFORM_EC_CHARGER_PSYS=y
+CONFIG_PLATFORM_EC_CHARGER_PSYS_READ=y
+CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10
+CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=20
+CONFIG_PLATFORM_EC_CONSOLE_CMD_CHARGER_ADC_AMON_BMON=y
+
+# USB-A
+CONFIG_PLATFORM_EC_USB_A_PORT_COUNT=1
+
+# USB-C
+CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y
+CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=n
+CONFIG_PLATFORM_EC_USBC_PPC_SN5S330=y
+CONFIG_PLATFORM_EC_USBC_RETIMER_FW_UPDATE=n
+CONFIG_PLATFORM_EC_USBC_SS_MUX_DFP_ONLY=y
+CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y
+CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y
+CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y
+CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y
+CONFIG_PLATFORM_EC_USB_PD_PORT_MAX_COUNT=2
+CONFIG_PLATFORM_EC_USB_PD_REV30=n
+CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y
+CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8805=y
+CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n
+CONFIG_PLATFORM_EC_USB_PD_LOGGING=y
+CONFIG_PLATFORM_EC_USB_PORT_POWER_DUMB=y
+CONFIG_HAS_TASK_PD_C1=y
+CONFIG_HAS_TASK_PD_INT_C1=y
+
+# USB ID
+# This is allocated specifically for Herobrine
+# http://google3/hardware/standards/usb/
+# TODO(b/183608112): Move to device tree
+CONFIG_PLATFORM_EC_USB_PID=0x5055
+
+# RTC
+CONFIG_PLATFORM_EC_RTC=y
+CONFIG_PLATFORM_EC_HOSTCMD_RTC=y
+CONFIG_PLATFORM_EC_CONSOLE_CMD_RTC=y
+
+# EC software sync
+CONFIG_PLATFORM_EC_VBOOT_HASH=y
+
+# Serial Host Interface (SHI) device.
+CONFIG_CROS_SHI_NPCX=y
+
+# Sensors
+CONFIG_PLATFORM_EC_MOTIONSENSE=y
+CONFIG_PLATFORM_EC_ACCEL_FIFO=y
+CONFIG_PLATFORM_EC_ACCEL_INTERRUPTS=y
+CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y
+CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y
+CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y
+CONFIG_PLATFORM_EC_LID_ANGLE=y
+CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y
+CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y
+CONFIG_PLATFORM_EC_TABLET_MODE=y
+CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y
+
+# Sensor Drivers
+CONFIG_PLATFORM_EC_ACCEL_BMA255=y
+CONFIG_PLATFORM_EC_ACCELGYRO_BMI160=y
+CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y
+
+# Features should be enabled. But the code RAM is not enough, disable them.
+#CONFIG_PLATFORM_EC_ACCEL_SPOOF_MODE=y
+#CONFIG_PLATFORM_EC_EMULATED_SYSRQ=y