diff options
-rw-r--r-- | board/falco/board.h | 9 | ||||
-rw-r--r-- | board/link/board.h | 19 | ||||
-rw-r--r-- | board/peppy/board.h | 10 | ||||
-rw-r--r-- | board/slippy/board.h | 11 | ||||
-rw-r--r-- | board/wolf/board.h | 9 | ||||
-rw-r--r-- | chip/lm4/uart.c | 2 | ||||
-rw-r--r-- | common/battery_link.c | 3 | ||||
-rw-r--r-- | common/charge_state.c | 6 | ||||
-rw-r--r-- | common/charger_bq24707a.c | 4 | ||||
-rw-r--r-- | common/charger_bq24715.c | 4 | ||||
-rw-r--r-- | common/charger_bq24725.c | 4 | ||||
-rw-r--r-- | common/charger_bq24738.c | 4 | ||||
-rw-r--r-- | include/config.h | 321 |
13 files changed, 219 insertions, 187 deletions
diff --git a/board/falco/board.h b/board/falco/board.h index 76182ed59e..f8cb1406ce 100644 --- a/board/falco/board.h +++ b/board/falco/board.h @@ -165,13 +165,8 @@ enum x86_signal { }; /* Charger module */ -/* Set charger input current limit - * Note - this value should depend on external power adapter, - * designed charging voltage, and the maximum power of - * a running system. - */ -#define CONFIG_BQ24738_R_SNS 10 /* 10 mOhm charge sense resistor */ -#define CONFIG_BQ24738_R_AC 10 /* 10 mOhm input current sense resistor */ +#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */ +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 /* Input sensor resistor, mOhm */ #define CONFIG_CHARGER_INPUT_CURRENT 4032 /* mA, about half max */ enum adc_channel { diff --git a/board/link/board.h b/board/link/board.h index abcdf04508..e40dee3191 100644 --- a/board/link/board.h +++ b/board/link/board.h @@ -65,21 +65,10 @@ enum adc_channel }; /* Charger module */ -/* Set charger input current limit - * Note - this value should depend on external power adapter, - * designed charging voltage, and the maximum power of - * a running system. - * Following value 4032 mA is the maximum input limit - * on Link's design. - */ -#define CONFIG_CHARGER_INPUT_CURRENT 4032 -#define CONFIG_BQ24725_R_SNS 10 /* 10 mOhm charge sense resistor */ -#define CONFIG_BQ24725_R_AC 20 /* 20 mOhm input current sense resistor */ - -/* Board specific charging current limit - * The current constrant of all components on the charging path. - */ -#define CONFIG_CHARGING_CURRENT_LIMIT 3000 /* PL102 inductor 3.0A(3.8A) */ +#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */ +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* Input sensor resistor, mOhm */ +#define CONFIG_CHARGER_INPUT_CURRENT 4032 /* mA, based on Link HW design */ +#define CONFIG_CHARGER_CURRENT_LIMIT 3000 /* PL102 inductor 3.0A(3.8A) */ /* I2C ports */ #define I2C_PORT_BATTERY 0 diff --git a/board/peppy/board.h b/board/peppy/board.h index 52517bedb6..34b0155233 100644 --- a/board/peppy/board.h +++ b/board/peppy/board.h @@ -165,16 +165,10 @@ enum x86_signal { }; /* Charger module */ -/* Set charger input current limit - * Note - this value should depend on external power adapter, - * designed charging voltage, and the maximum power of - * a running system. - */ -#define CONFIG_BQ24707A_R_SNS 10 /* 10 mOhm charge sense resistor */ -#define CONFIG_BQ24707A_R_AC 10 /* 10 mOhm input current sense resistor */ +#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */ +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 /* Input sensor resistor, mOhm */ #define CONFIG_CHARGER_INPUT_CURRENT 3078 /* mA, 90% of power supply rating */ - enum adc_channel { /* EC internal die temperature in degrees K. */ ADC_CH_EC_TEMP = 0, diff --git a/board/slippy/board.h b/board/slippy/board.h index 072fdf0420..e82e570be5 100644 --- a/board/slippy/board.h +++ b/board/slippy/board.h @@ -163,15 +163,8 @@ enum x86_signal { }; /* Charger module */ -/* Set charger input current limit - * Note - this value should depend on external power adapter, - * designed charging voltage, and the maximum power of - * a running system. - * Following value 4032 mA is the maximum input limit - * on Link's design. - */ -#define CONFIG_BQ24707A_R_SNS 10 /* 10 mOhm charge sense resistor */ -#define CONFIG_BQ24707A_R_AC 10 /* 10 mOhm input current sense resistor */ +#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */ +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 /* Input sensor resistor, mOhm */ #define CONFIG_CHARGER_INPUT_CURRENT 4032 /* mA, about half max */ diff --git a/board/wolf/board.h b/board/wolf/board.h index d015cec803..8386d425b4 100644 --- a/board/wolf/board.h +++ b/board/wolf/board.h @@ -153,13 +153,8 @@ enum x86_signal { }; /* Charger module */ -/* Set charger input current limit - * Note - this value should depend on external power adapter, - * designed charging voltage, and the maximum power of - * a running system. - */ -#define CONFIG_BQ24707A_R_SNS 10 /* 10 mOhm charge sense resistor */ -#define CONFIG_BQ24707A_R_AC 10 /* 10 mOhm input current sense resistor */ +#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */ +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 /* Input sensor resistor, mOhm */ #define CONFIG_CHARGER_INPUT_CURRENT 3078 /* mA, 90% of a 65W adapter at 19V */ enum adc_channel { diff --git a/chip/lm4/uart.c b/chip/lm4/uart.c index e9ed2f790d..1e7df2f0a3 100644 --- a/chip/lm4/uart.c +++ b/chip/lm4/uart.c @@ -283,4 +283,4 @@ DECLARE_CONSOLE_COMMAND(comxtest, command_comxtest, "Write test data to COMx uart", NULL); -#endif /* CONFIG_COMX_TEST */ +#endif /* CONFIG_CMD_COMX_TEST */ diff --git a/common/battery_link.c b/common/battery_link.c index 98cde6de46..c92f3dafd2 100644 --- a/common/battery_link.c +++ b/common/battery_link.c @@ -120,10 +120,7 @@ void battery_vendor_params(struct batt_params *batt) limit_value(desired_current, current_limit[temp_range][volt_range]); -#ifndef CONFIG_SLOW_PRECHARGE /* If battery wants current, give it at least the precharge current */ if (*desired_current > 0 && *desired_current < info.precharge_current) *desired_current = info.precharge_current; -#endif /* CONFIG_SLOW_PRECHARGE */ - } diff --git a/common/charge_state.c b/common/charge_state.c index 2d342c1764..95b366d6b6 100644 --- a/common/charge_state.c +++ b/common/charge_state.c @@ -280,9 +280,9 @@ static int state_common(struct power_state_context *ctx) /* Apply battery pack vendor charging method */ battery_vendor_params(batt); -#ifdef CONFIG_CHARGING_CURRENT_LIMIT - if (batt->desired_current > CONFIG_CHARGING_CURRENT_LIMIT) - batt->desired_current = CONFIG_CHARGING_CURRENT_LIMIT; +#ifdef CONFIG_CHARGER_CURRENT_LIMIT + if (batt->desired_current > CONFIG_CHARGER_CURRENT_LIMIT) + batt->desired_current = CONFIG_CHARGER_CURRENT_LIMIT; #endif if (batt->desired_current > user_current_limit) batt->desired_current = user_current_limit; diff --git a/common/charger_bq24707a.c b/common/charger_bq24707a.c index 35ca469ed1..9538318997 100644 --- a/common/charger_bq24707a.c +++ b/common/charger_bq24707a.c @@ -16,8 +16,8 @@ /* Sense resistor configurations and macros */ #define DEFAULT_SENSE_RESISTOR 10 -#define R_SNS CONFIG_BQ24707A_R_SNS -#define R_AC CONFIG_BQ24707A_R_AC +#define R_SNS CONFIG_CHARGER_SENSE_RESISTOR +#define R_AC CONFIG_CHARGER_SENSE_RESISTOR_AC #define REG_TO_CURRENT(REG, RS) ((REG) * DEFAULT_SENSE_RESISTOR / (RS)) #define CURRENT_TO_REG(CUR, RS) ((CUR) * (RS) / DEFAULT_SENSE_RESISTOR) diff --git a/common/charger_bq24715.c b/common/charger_bq24715.c index dcdf249fbf..66d178a4c3 100644 --- a/common/charger_bq24715.c +++ b/common/charger_bq24715.c @@ -14,8 +14,8 @@ /* Sense resistor configurations and macros */ #define DEFAULT_SENSE_RESISTOR 10 -#define R_SNS CONFIG_BQ24715_R_SNS -#define R_AC CONFIG_BQ24715_R_AC +#define R_SNS CONFIG_CHARGER_SENSE_RESISTOR +#define R_AC CONFIG_CHARGER_SENSE_RESISTOR_AC #define REG_TO_CURRENT(REG, RS) ((REG) * DEFAULT_SENSE_RESISTOR / (RS)) #define CURRENT_TO_REG(CUR, RS) ((CUR) * (RS) / DEFAULT_SENSE_RESISTOR) diff --git a/common/charger_bq24725.c b/common/charger_bq24725.c index a0d297a996..d69b3edf13 100644 --- a/common/charger_bq24725.c +++ b/common/charger_bq24725.c @@ -15,8 +15,8 @@ /* Sense resistor configurations and macros */ #define DEFAULT_SENSE_RESISTOR 10 -#define R_SNS CONFIG_BQ24725_R_SNS -#define R_AC CONFIG_BQ24725_R_AC +#define R_SNS CONFIG_CHARGER_SENSE_RESISTOR +#define R_AC CONFIG_CHARGER_SENSE_RESISTOR_AC #define REG_TO_CURRENT(REG, RS) ((REG) * DEFAULT_SENSE_RESISTOR / (RS)) #define CURRENT_TO_REG(CUR, RS) ((CUR) * (RS) / DEFAULT_SENSE_RESISTOR) diff --git a/common/charger_bq24738.c b/common/charger_bq24738.c index 7fc8501fce..eaea6495d9 100644 --- a/common/charger_bq24738.c +++ b/common/charger_bq24738.c @@ -15,8 +15,8 @@ /* Sense resistor configurations and macros */ #define DEFAULT_SENSE_RESISTOR 10 -#define R_SNS CONFIG_BQ24738_R_SNS -#define R_AC CONFIG_BQ24738_R_AC +#define R_SNS CONFIG_CHARGER_SENSE_RESISTOR +#define R_AC CONFIG_CHARGER_SENSE_RESISTOR_AC #define REG_TO_CURRENT(REG, RS) ((REG) * DEFAULT_SENSE_RESISTOR / (RS)) #define CURRENT_TO_REG(CUR, RS) ((CUR) * (RS) / DEFAULT_SENSE_RESISTOR) diff --git a/include/config.h b/include/config.h index 77177c6452..8d6088312b 100644 --- a/include/config.h +++ b/include/config.h @@ -19,134 +19,203 @@ #define __CROS_EC_CONFIG_H /* - * TODO(rspangler): set defaults and describe ALL config variables. + * All config options are listed alphabetically and described here. * - * Here is the current list: - -CONFIG_ADC -CONFIG_ASSERT_HELP -CONFIG_BACKLIGHT_X86 -CONFIG_BATTERY_BQ20Z453 -CONFIG_BATTERY_FALCO -CONFIG_BATTERY_LINK -CONFIG_BATTERY_PEPPY -CONFIG_BATTERY_SLIPPY -CONFIG_BATTERY_SPRING -CONFIG_BOARD_POST_GPIO_INIT -CONFIG_BOARD_PRE_INIT -CONFIG_BOARD_VERSION -CONFIG_BQ24707A_R_AC -CONFIG_BQ24707A_R_SNS -CONFIG_BQ24725_R_AC -CONFIG_BQ24725_R_SNS -CONFIG_BQ24738_R_AC -CONFIG_BQ24738_R_SNS -CONFIG_CHARGER -CONFIG_CHARGER_BQ24707A -CONFIG_CHARGER_BQ24725 -CONFIG_CHARGER_BQ24738 -CONFIG_CHARGER_INPUT_CURRENT -CONFIG_CHARGER_TPS65090 -CONFIG_CHARGING_CURRENT_LIMIT -CONFIG_CHIPSET_GAIA -CONFIG_CHIPSET_HASWELL -CONFIG_CHIPSET_IVYBRIDGE -CONFIG_CMD_PMU -CONFIG_CONSOLE_CMDHELP -CONFIG_CONSOLE_RESTRICTED_INPUT -CONFIG_CONSOLE_UART -CONFIG_CUSTOM_KEYSCAN -CONFIG_DEBUG -CONFIG_DEBUG_I2C -CONFIG_EEPROM -CONFIG_EOPTION -CONFIG_EXTPOWER_FALCO -CONFIG_EXTPOWER_GPIO -CONFIG_EXTPOWER_SNOW -CONFIG_EXTPOWER_USB -CONFIG_FLASH -CONFIG_FLASH_BANK_SIZE -CONFIG_FLASH_BASE -CONFIG_FLASH_ERASED_VALUE32 -CONFIG_FLASH_ERASE_SIZE -CONFIG_FLASH_PHYSICAL_SIZE -CONFIG_FLASH_PROTECT_NEXT_BOOT -CONFIG_FLASH_SIZE -CONFIG_FLASH_WRITE_SIZE -CONFIG_FMAP -CONFIG_FORCE_CONSOLE_RESUME -CONFIG_FPU -CONFIG_FW_IMAGE_SIZE -CONFIG_FW_PSTATE_OFF -CONFIG_FW_PSTATE_SIZE -CONFIG_FW_RO_OFF -CONFIG_FW_RO_SIZE -CONFIG_FW_RW_OFF -CONFIG_FW_RW_SIZE -CONFIG_FW_WP_RO_OFF -CONFIG_FW_WP_RO_SIZE -CONFIG_HOSTCMD -CONFIG_HOST_COMMAND_STATUS -CONFIG_HOST_EMU -CONFIG_HOST_UART -CONFIG_HOST_UART1_GPIOS_PB0_1 -CONFIG_HOST_UART1_GPIOS_PC4_5 -CONFIG_HOST_UART2_GPIOS_PG4_5 -CONFIG_HOST_UART_IRQ -CONFIG_I2C -CONFIG_I2C_ARBITRATION -CONFIG_I2C_HOST_AUTO -CONFIG_I2C_PASSTHROUGH -CONFIG_I2C_PASSTHRU_RESTRICTED -CONFIG_IRQ_COUNT -CONFIG_KEYBOARD_PROTOCOL_8042 -CONFIG_KEYBOARD_PROTOCOL_MKBP -CONFIG_KEYBOARD_SUPPRESS_NOISE -CONFIG_LED_DRIVER_LP5562 -CONFIG_LED_FALCO -CONFIG_LED_PEPPY -CONFIG_LED_SLIPPY -CONFIG_LID_SWITCH -CONFIG_LOW_POWER_IDLE -CONFIG_LPC -CONFIG_ONEWIRE -CONFIG_ONEWIRE_LED -CONFIG_PANIC_HELP -CONFIG_PECI -CONFIG_PMU_BOARD_INIT -CONFIG_PMU_FORCE_FET -CONFIG_PMU_HARD_RESET -CONFIG_PMU_TPS65090 -CONFIG_POWER_BUTTON -CONFIG_PSTORE -CONFIG_PWM_FAN -CONFIG_PWM_KBLIGHT -CONFIG_RAM_BASE -CONFIG_RAM_SIZE -CONFIG_SMART_BATTERY -CONFIG_SPI -CONFIG_STACK_SIZE -CONFIG_SYSTEM_UNLOCKED -CONFIG_TASK_LIST -CONFIG_TASK_PROFILING -CONFIG_TEMP_SENSOR -CONFIG_TEMP_SENSOR_G781 -CONFIG_TEMP_SENSOR_TMP006 -CONFIG_TEST_TASK_LIST -CONFIG_UART_BAUD_RATE -CONFIG_UART_RX_BUF_SIZE -CONFIG_UART_TX_BUF_SIZE -CONFIG_USB_PORT_POWER_DUMB -CONFIG_USB_PORT_POWER_SMART -CONFIG_USB_SWITCH_TSU6721 -CONFIG_WATCHDOG -CONFIG_WATCHDOG_HELP -CONFIG_WIRELESS -CONFIG_WP_ACTIVE_HIGH - - * Also describe the HAS_TASK_* macro and how/when it should be used vs. a - * config define. + * If you add a new config option somewhere in the code, you must add a + * default value here and describe what it does. + * + * To get a list current list, run this command: + * git grep " CONFIG_" | grep -o "CONFIG_[A-Za-z0-9_]\+" | sort | uniq + * + * TODO(rspangler): describe all of these. Also describe the HAS_TASK_* macro + * and how/when it should be used vs. a config define. + */ + +#undef CONFIG_AC_POWER_STATUS +#undef CONFIG_ADC +#undef CONFIG_ASSERT_HELP +#undef CONFIG_BACKLIGHT_X86 + +#undef CONFIG_BATTERY_BQ20Z453 +#undef CONFIG_BATTERY_FALCO +#undef CONFIG_BATTERY_LINK +#undef CONFIG_BATTERY_PEPPY +#undef CONFIG_BATTERY_SLIPPY +#undef CONFIG_BATTERY_SPRING + +#undef CONFIG_BOARD_PMU_INIT +#undef CONFIG_BOARD_POST_GPIO_INIT +#undef CONFIG_BOARD_PRE_INIT +#undef CONFIG_BOARD_VERSION + +/*****************************************************************************/ +/* Charger config */ + +/* Compile common charge state code */ +#undef CONFIG_CHARGER + +/* Compile charger-specific code for these chargers (pick at most one) */ +#undef CONFIG_CHARGER_BQ24707A +#undef CONFIG_CHARGER_BQ24715 +#undef CONFIG_CHARGER_BQ24725 +#undef CONFIG_CHARGER_BQ24738 +#undef CONFIG_CHARGER_TPS65090 + +/* + * Board specific charging current limit, in mA. If defined, the charge state + * machine will not allow the battery to request more current than this. + */ +#undef CONFIG_CHARGER_CURRENT_LIMIT + +/* + * Maximum amount of input current the charger can receive, in mA. + * + * This value should depend on external power adapter, designed charging + * voltage, and the maximum power of the running system. */ +#undef CONFIG_CHARGER_INPUT_CURRENT + +/* Value of the charge sense resistor, in mOhms */ +#undef CONFIG_CHARGER_SENSE_RESISTOR + +/* Value of the input current sense resistor, in mOhms */ +#undef CONFIG_CHARGER_SENSE_RESISTOR_AC + +/*****************************************************************************/ + +#undef CONFIG_CHIPSET_GAIA +#undef CONFIG_CHIPSET_HASWELL +#undef CONFIG_CHIPSET_IVYBRIDGE + +#undef CONFIG_CMD_COMXTEST +#undef CONFIG_CMD_ECTEMP +#undef CONFIG_CMD_PLL +#undef CONFIG_CMD_PMU +#undef CONFIG_CMD_POWERLED +#undef CONFIG_CMD_SCRATCHPAD +#undef CONFIG_CMD_SLEEP + +#undef CONFIG_CONSOLE_CMDHELP +#undef CONFIG_CONSOLE_RESTRICTED_INPUT +#undef CONFIG_CONSOLE_UART + +#undef CONFIG_CUSTOM_KEYSCAN +#undef CONFIG_DEBUG +#undef CONFIG_DEBUG_I2C +#undef CONFIG_DMA_HELP +#undef CONFIG_EEPROM +#undef CONFIG_EOPTION + +#undef CONFIG_EXTPOWER_FALCO +#undef CONFIG_EXTPOWER_GPIO +#undef CONFIG_EXTPOWER_SNOW +#undef CONFIG_EXTPOWER_USB + +#undef CONFIG_FLASH +#undef CONFIG_FLASH_BANK_SIZE +#undef CONFIG_FLASH_BASE +#undef CONFIG_FLASH_ERASED_VALUE32 +#undef CONFIG_FLASH_ERASE_SIZE +#undef CONFIG_FLASH_PHYSICAL_SIZE +#undef CONFIG_FLASH_PROTECT_NEXT_BOOT +#undef CONFIG_FLASH_SIZE +#undef CONFIG_FLASH_WRITE_IDEAL_SIZE +#undef CONFIG_FLASH_WRITE_SIZE + +#undef CONFIG_FMAP +#undef CONFIG_FORCE_CONSOLE_RESUME +#undef CONFIG_FPU + +#undef CONFIG_FW_IMAGE_SIZE +#undef CONFIG_FW_PSTATE_OFF +#undef CONFIG_FW_PSTATE_SIZE +#undef CONFIG_FW_RO_OFF +#undef CONFIG_FW_RO_SIZE +#undef CONFIG_FW_RW_OFF +#undef CONFIG_FW_RW_SIZE +#undef CONFIG_FW_WP_RO_OFF +#undef CONFIG_FW_WP_RO_SIZE + +#undef CONFIG_HOSTCMD +#undef CONFIG_HOST_COMMAND_STATUS +#undef CONFIG_HOST_EMU +#undef CONFIG_HOST_UART +#undef CONFIG_HOST_UART1_GPIOS_PB0_1 +#undef CONFIG_HOST_UART1_GPIOS_PC4_5 +#undef CONFIG_HOST_UART2_GPIOS_PG4_5 +#undef CONFIG_HOST_UART_IRQ + +#undef CONFIG_I2C +#undef CONFIG_I2C_ARBITRATION +#undef CONFIG_I2C_DEBUG_PASSTHRU +#undef CONFIG_I2C_HOST_AUTO +#undef CONFIG_I2C_PASSTHROUGH +#undef CONFIG_I2C_PASSTHRU_RESTRICTED + +#undef CONFIG_IRQ_COUNT + +#undef CONFIG_KEYBOARD_DEBUG_MORE +#undef CONFIG_KEYBOARD_PROTOCOL_8042 +#undef CONFIG_KEYBOARD_PROTOCOL_MKBP +#undef CONFIG_KEYBOARD_SUPPRESS_NOISE +#undef CONFIG_KEYBOARD_TEST + +#undef CONFIG_LED_DRIVER_LP5562 +#undef CONFIG_LED_FALCO +#undef CONFIG_LED_PEPPY + +#undef CONFIG_LID_SWITCH +#undef CONFIG_LOW_POWER_IDLE +#undef CONFIG_LPC +#undef CONFIG_ONEWIRE +#undef CONFIG_ONEWIRE_LED +#undef CONFIG_OVERFLOW_DETECT +#undef CONFIG_PANIC_HELP +#undef CONFIG_PECI + +#undef CONFIG_PMU_BOARD_INIT +#undef CONFIG_PMU_FORCE_FET +#undef CONFIG_PMU_HARD_RESET +#undef CONFIG_PMU_TPS65090 + +#undef CONFIG_POWER_BUTTON +#undef CONFIG_POWER_BUTTON_X86 +#undef CONFIG_PSTATE_AT_END +#undef CONFIG_PSTORE +#undef CONFIG_PWM_FAN +#undef CONFIG_PWM_KBLIGHT +#undef CONFIG_RAM_BASE +#undef CONFIG_RAM_SIZE +#undef CONFIG_SAVE_VBOOT_HASH +#undef CONFIG_SMART_BATTERY +#undef CONFIG_SOMETHING +#undef CONFIG_SPI +#undef CONFIG_STACK_SIZE +#undef CONFIG_SWITCH +#undef CONFIG_SYSTEM_UNLOCKED +#undef CONFIG_TASK_LIST +#undef CONFIG_TASK_PROFILING + +#undef CONFIG_TEMP_SENSOR +#undef CONFIG_TEMP_SENSOR_G781 +#undef CONFIG_TEMP_SENSOR_TMP006 + +#undef CONFIG_TEST_TASK_LIST + +#undef CONFIG_UART_BAUD_RATE +#undef CONFIG_UART_RX_BUF_SIZE +#undef CONFIG_UART_TX_BUF_SIZE + +#undef CONFIG_USB_PORT_POWER_DUMB +#undef CONFIG_USB_PORT_POWER_SMART +#undef CONFIG_USB_SWITCH_TSU6721 + +#undef CONFIG_USE_CPCIDVI +#undef CONFIG_USE_PLL +#undef CONFIG_WATCHDOG +#undef CONFIG_WATCHDOG_HELP +#undef CONFIG_WIRELESS +#undef CONFIG_WP_ACTIVE_HIGH /* * Include board and core configs, since those hold the CONFIG_ constants for a |