diff options
| -rw-r--r-- | include/usb_pd.h | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/include/usb_pd.h b/include/usb_pd.h index 071e61386c..cee449860c 100644 --- a/include/usb_pd.h +++ b/include/usb_pd.h @@ -187,7 +187,21 @@ enum pd_rx_errors { #define PD_T_SINK_WAIT_CAP (600*MSEC) /* between 310ms and 620ms */ #define PD_T_SINK_TRANSITION (35*MSEC) /* between 20ms and 35ms */ #define PD_T_SOURCE_ACTIVITY (45*MSEC) /* between 40ms and 50ms */ +/* + * Adjusting for TCPMv2 PD2 Compliance. In tests like TD.PD.SRC.E5 this + * value is the duration before the Hard Reset can be sent. Setting the + * timer value to the maximum will delay sending the HardReset until + * after the window has closed instead of when it is desired at the + * beginning of the window. + * Leaving TCPMv1 as it was as there are no current requests to adjust + * for compliance on the old stack and making this change breaks the + * usb_pd unit test. + */ +#ifndef CONFIG_USB_PD_TCPMV2 #define PD_T_SENDER_RESPONSE (30*MSEC) /* between 24ms and 30ms */ +#else +#define PD_T_SENDER_RESPONSE (24*MSEC) /* between 24ms and 30ms */ +#endif #define PD_T_PS_TRANSITION (500*MSEC) /* between 450ms and 550ms */ #define PD_T_PS_SOURCE_ON (480*MSEC) /* between 390ms and 480ms */ #define PD_T_PS_SOURCE_OFF (920*MSEC) /* between 750ms and 920ms */ |