diff options
| -rw-r--r-- | baseboard/hatch/baseboard.c | 9 | ||||
| -rw-r--r-- | baseboard/hatch/baseboard.h | 1 | ||||
| -rw-r--r-- | board/akemi/board.c | 8 | ||||
| -rw-r--r-- | board/hatch/board.c | 7 | ||||
| -rw-r--r-- | board/helios/board.c | 7 | ||||
| -rw-r--r-- | board/jinlon/board.c | 8 | ||||
| -rw-r--r-- | board/kindred/board.c | 2 | ||||
| -rw-r--r-- | board/kohaku/board.c | 7 | ||||
| -rw-r--r-- | board/mushu/board.c | 7 | ||||
| -rw-r--r-- | board/stryke/board.c | 7 |
10 files changed, 58 insertions, 5 deletions
diff --git a/baseboard/hatch/baseboard.c b/baseboard/hatch/baseboard.c index 8253f11239..0651ffdc7c 100644 --- a/baseboard/hatch/baseboard.c +++ b/baseboard/hatch/baseboard.c @@ -355,10 +355,11 @@ void baseboard_mst_enable_control(enum mst_source src, int level) #ifndef TEST_BUILD void lid_angle_peripheral_enable(int enable) { - /* TODO(b/125936966): Need to add SKU dependency for convertibles */ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - enable = 0; - keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); + if (board_is_convertible()) { + if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) + enable = 0; + keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); + } } #endif diff --git a/baseboard/hatch/baseboard.h b/baseboard/hatch/baseboard.h index 200480e152..09ea0056a7 100644 --- a/baseboard/hatch/baseboard.h +++ b/baseboard/hatch/baseboard.h @@ -200,6 +200,7 @@ unsigned char get_board_sku(void); unsigned char get_board_id(void); void board_reset_pd_mcu(void); void baseboard_mst_enable_control(enum mst_source, int level); +bool board_is_convertible(void); /* Check with variant about battery presence. */ enum battery_present variant_battery_present(void); diff --git a/board/akemi/board.c b/board/akemi/board.c index c379d68fec..c2f6b14d76 100644 --- a/board/akemi/board.c +++ b/board/akemi/board.c @@ -429,3 +429,11 @@ static void board_chipset_shutdown(void) sb_quick_charge_mode(SB_QUICK_CHARGE_ENABLE); } DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT); + +bool board_is_convertible(void) +{ + const uint8_t sku = get_board_sku(); + + return (sku == 255) || (sku == 1) || (sku == 2) || (sku == 3) || + (sku == 4); +} diff --git a/board/hatch/board.c b/board/hatch/board.c index ae25f66e5b..4e68b7d215 100644 --- a/board/hatch/board.c +++ b/board/hatch/board.c @@ -490,3 +490,10 @@ void board_overcurrent_event(int port, int is_overcurrented) /* Note that the level is inverted because the pin is active low. */ gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented); } + +bool board_is_convertible(void) +{ + const uint8_t sku = get_board_sku(); + + return (sku == 255); +} diff --git a/board/helios/board.c b/board/helios/board.c index 008cdd6e96..dd0b2c87a3 100644 --- a/board/helios/board.c +++ b/board/helios/board.c @@ -405,3 +405,10 @@ int board_tcpc_post_init(int port) return rv; } + +bool board_is_convertible(void) +{ + const uint8_t sku = get_board_sku(); + + return (sku == 255) || (sku == 1); +} diff --git a/board/jinlon/board.c b/board/jinlon/board.c index 1a0936615e..a9646a7794 100644 --- a/board/jinlon/board.c +++ b/board/jinlon/board.c @@ -427,3 +427,11 @@ const int keyboard_factory_scan_pins[][2] = { const int keyboard_factory_scan_pins_used = ARRAY_SIZE(keyboard_factory_scan_pins); #endif + +bool board_is_convertible(void) +{ + const uint8_t sku = get_board_sku(); + + return (sku == 255) || (sku == 1) || (sku == 2) || (sku == 21) || + (sku == 22); +} diff --git a/board/kindred/board.c b/board/kindred/board.c index f468851371..308ccf2eca 100644 --- a/board/kindred/board.c +++ b/board/kindred/board.c @@ -408,7 +408,7 @@ static void board_gpio_set_pp5000(void) } -static bool board_is_convertible(void) +bool board_is_convertible(void) { uint8_t sku_id = get_board_sku(); /* SKU ID of Kled : 1, 2, 3, 4 */ diff --git a/board/kohaku/board.c b/board/kohaku/board.c index 1cd8021e13..e2711433fc 100644 --- a/board/kohaku/board.c +++ b/board/kohaku/board.c @@ -465,3 +465,10 @@ void board_overcurrent_event(int port, int is_overcurrented) /* Note that the level is inverted because the pin is active low. */ gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented); } + +bool board_is_convertible(void) +{ + const uint8_t sku = get_board_sku(); + + return (sku == 255) || (sku == 1); +} diff --git a/board/mushu/board.c b/board/mushu/board.c index 27d1ab4002..4670c2bb0f 100644 --- a/board/mushu/board.c +++ b/board/mushu/board.c @@ -490,3 +490,10 @@ void board_overcurrent_event(int port, int is_overcurrented) /* Note that the level is inverted because the pin is active low. */ gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented); } + +bool board_is_convertible(void) +{ + const uint8_t sku = get_board_sku(); + + return (sku == 255); +} diff --git a/board/stryke/board.c b/board/stryke/board.c index 82deccbfe9..dc5de9d253 100644 --- a/board/stryke/board.c +++ b/board/stryke/board.c @@ -406,3 +406,10 @@ void board_overcurrent_event(int port, int is_overcurrented) /* Note that the level is inverted because the pin is active low. */ gpio_set_level(GPIO_USB_C_OC_ODL, !is_overcurrented); } + +bool board_is_convertible(void) +{ + const uint8_t sku = get_board_sku(); + + return (sku == 255); +} |