diff options
| -rw-r--r-- | board/rammus/board.c | 11 | ||||
| -rw-r--r-- | board/rammus/gpio.inc | 2 |
2 files changed, 10 insertions, 3 deletions
diff --git a/board/rammus/board.c b/board/rammus/board.c index 365ab60bc6..2f88f6c293 100644 --- a/board/rammus/board.c +++ b/board/rammus/board.c @@ -407,8 +407,15 @@ static void board_pmic_init(void) if (system_jumped_to_this_image()) return; - /* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x3e, 0x04); + /* + * DISCHGCNT2 - enable 100 ohm discharge on + * V5A_DS3/V33A_DSW/V33A_PCH/V1.8A + */ + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x3d, 0x55); + /* DISCHGCNT3 - enable 100 ohm discharge on V1.8U_25U/V1.00A */ + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x3e, 0x44); + /* DISCHGCNT4 - enable 100 ohm discharge on v1.8S */ + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992, 0x3f, 0x04); board_pmic_disable_slp_s0_vr_decay(); diff --git a/board/rammus/gpio.inc b/board/rammus/gpio.inc index fd0f8d5e14..b3f6e6ac97 100644 --- a/board/rammus/gpio.inc +++ b/board/rammus/gpio.inc @@ -61,7 +61,7 @@ GPIO(BRD_ID_EN, PIN(0, 2), GPIO_OUT_LOW) /* Enable f /* Reserved, for the lid accelerator interrupt */ GPIO(LID_ACCEL_INT_L, PIN(D, 2), GPIO_INPUT | GPIO_SEL_1P8V | GPIO_PULL_UP) /* LID Accelerator interrupt */ /* Reserved, changing touchpad interrupt behavior for wakeup */ -GPIO(TP_INT_CONN, PIN(C, 2), GPIO_INPUT | GPIO_PULL_UP) /* Touchpad interrupt */ +GPIO(TP_INT_CONN, PIN(C, 2), GPIO_INPUT) /* Touchpad interrupt */ /* Reserved, output low to enable touchpad interrupt by default */ GPIO(TP_INT_EN, PIN(A, 1), GPIO_OUT_LOW) /* Enable Touchpad interrupt */ |